linux-kernel - [PATCH 4/4] dt-bindings: mfd: max8998: Add charger subnode binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1524844982-4714-5-git-send-email-pawel.mikolaj.chmiel@gmail.com>
Date:   Fri, 27 Apr 2018 18:03:02 +0200
From:   Paweł Chmiel <pawel.mikolaj.chmiel@...il.com>
To:     lgirdwood@...il.com, broonie@...nel.org, sre@...nel.org,
        lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com
Cc:     linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org,
        Paweł Chmiel <pawel.mikolaj.chmiel@...il.com>
Subject: [PATCH 4/4] dt-bindings: mfd: max8998: Add charger subnode binding

This patch adds devicetree bindings documentation for
battery charging controller as the subnode of MAX8998 PMIC.
It's based on current behavior of driver.

Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@...il.com>
---
 Documentation/devicetree/bindings/mfd/max8998.txt | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
index 23a3650ff2a2..f95610afb57f 100644
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -50,6 +50,21 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
 - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
   for buck2 regulator that can be selected using dvs gpio.
 
+Charger: Configuration for battery charging controller should be added
+inside a child node named 'charger'.
+  Required properties:
+  - max8998,charge-eoc: Setup "End of Charge". If value equals 0,
+    remain value set from bootloader or default value will be used.
+    Valid values: 0, 10 - 45
+
+  - max8998,charge-restart: Setup "Charge Restart Level". If value equals 0,
+    remain value set from bootloader or default value will be used.
+    Valid values: -1, 0, 100, 150, 200
+
+  - max8998,charge-timeout: Setup "Charge Full Timeout". If value equals 0,
+    remain value set from bootloader or default value will be used.
+    Valid values: -1, 0, 5, 6, 7
+
 Regulators: All the regulators of MAX8998 to be instantiated shall be
 listed in a child node named 'regulators'. Each regulator is represented
 by a child node of the 'regulators' node.
@@ -99,6 +114,13 @@ Example:
 		max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
 		max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
 
+		/* Charger configuration */
+		charger {
+			max8998,charge-eoc = <0>;
+			max8998,charge-restart = <(-1)>;
+			max8998,charge-timeout = <7>;
+		};
+
 		/* Regulators to instantiate */
 		regulators {
 			ldo2_reg: LDO2 {
-- 
2.7.4