lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180428031231.GB3693@dragon> Date: Sat, 28 Apr 2018 11:12:32 +0800 From: Shawn Guo <shawnguo@...nel.org> To: jan.tuerk@...rion.com Cc: Rob Herring <robh+dt@...nel.org>, Mark Rutland <mark.rutland@....com>, Thierry Reding <thierry.reding@...il.com>, David Airlie <airlied@...ux.ie>, Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam <fabio.estevam@....com>, Russell King <linux@...linux.org.uk>, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org, linux-arm-kernel@...ts.infradead.org Subject: Re: [PATCH v4 6/7] ARM: dts: Add support for emtrion emCON-MX6 series On Fri, Apr 27, 2018 at 03:24:41PM +0200, jan.tuerk@...rion.com wrote: > From: Jan Tuerk <jan.tuerk@...rion.com> > > This patch adds support for the emtrion GmbH emCON-MX6 modules. > They are available with imx.6 Solo, Dual-Lite, Dual and Quad > equipped with Memory from 512MB to 2GB (configured by U-Boot). > > Our default developer-Kit ships with the Avari baseboard and the > EDT ETM0700G0BDH6 Display (imx6[q|dl]-emcon-avari). > > The devicetree is split into the common part providing all module > components and the basic support for all SoC versions > (imx6qdl-emcon.dtsi) and parts which are i.mx6 S|DL and D|Q relevant. > Finally the support for the avari baseboard in the developer-kit > configuration is provided by the emcon-avari dts files. > > Signed-off-by: Jan Tuerk <jan.tuerk@...rion.com> > --- > Changes for v4: > - re-arrange the Patch-series to match the DT-submitting-patches > - Additional patch for the Documentation of the new DT-bindings > - alphabetically sort the DT > - moved duplicated Avari baseboard code into separate common file. > > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/imx6dl-emcon-avari.dts | 17 + > arch/arm/boot/dts/imx6dl-emcon.dtsi | 28 + > arch/arm/boot/dts/imx6q-emcon-avari.dts | 17 + > arch/arm/boot/dts/imx6q-emcon.dtsi | 28 + > arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi | 208 ++++++++ > arch/arm/boot/dts/imx6qdl-emcon.dtsi | 826 +++++++++++++++++++++++++++++ > 7 files changed, 1126 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-emcon-avari.dts > create mode 100644 arch/arm/boot/dts/imx6dl-emcon.dtsi > create mode 100644 arch/arm/boot/dts/imx6q-emcon-avari.dts > create mode 100644 arch/arm/boot/dts/imx6q-emcon.dtsi > create mode 100644 arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi > create mode 100644 arch/arm/boot/dts/imx6qdl-emcon.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 7e2424957809..05b930da3fda 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -381,6 +381,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-cubox-i-emmc-som-v15.dtb \ > imx6dl-cubox-i-som-v15.dtb \ > imx6dl-dfi-fs700-m60.dtb \ > + imx6dl-emcon-avari.dtb \ > imx6dl-gw51xx.dtb \ > imx6dl-gw52xx.dtb \ > imx6dl-gw53xx.dtb \ > @@ -442,6 +443,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6q-display5-tianma-tm070-1280x768.dtb \ > imx6q-dmo-edmqmx6.dtb \ > imx6q-dms-ba16.dtb \ > + imx6q-emcon-avari.dtb \ > imx6q-evi.dtb \ > imx6q-gk802.dtb \ > imx6q-gw51xx.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/imx6dl-emcon-avari.dts > new file mode 100644 > index 000000000000..464c82a53da3 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-emcon-avari.dts > @@ -0,0 +1,17 @@ > +// SPDX-License-Identifier: (GPL-2.0 or MIT) > +/* > + * Copyright (C) 2018 emtrion GmbH > + * Author: Jan Tuerk <jan.tuerk@...rion.com> > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-emcon.dtsi" > +/*Include camera2 pinmux*/ > +#include "imx6dl-emcon.dtsi" > +#include "imx6qdl-emcon-avari.dtsi" > + > +/ { > + model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari"; > + compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl"; > +}; > diff --git a/arch/arm/boot/dts/imx6dl-emcon.dtsi b/arch/arm/boot/dts/imx6dl-emcon.dtsi > new file mode 100644 > index 000000000000..0d86e0ecdb4d > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-emcon.dtsi > @@ -0,0 +1,28 @@ > +// SPDX-License-Identifier: (GPL-2.0 or MIT) > +/* > + * Copyright (C) 2018 emtrion GmbH > + * Author: Jan Tuerk <jan.tuerk@...rion.com> > + */ > + > +/ { > + model = "emtrion SoM emCON-MX6 Solo/DualLite"; > + compatible = "emtrion,emcon-mx6", "fsl,imx6dl"; > +}; > + > +&iomuxc { > + pinctrl_cpi2: csi1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x0b0b1 > + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1b0b1 > + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x1b0b1 > + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x1b0b1 > + MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x1b0b1 > + MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x1b0b1 > + MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x1b0b1 > + MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x1b0b1 > + MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x1b0b1 > + MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x1b0b1 > + MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1b0b1 > + >; > + }; > +}; I'm uncomfortable with maintain two more dtsi files only for a single pinctrl entry. Instead, I would suggest you put CSI node and its pinctrl entry into imx6q/dl-emcon-avari.dts, and have CSI node refer to its pinctrl entry rather than having the pinctrl in hog group. > diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts > new file mode 100644 > index 000000000000..093afe2f9069 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-emcon-avari.dts > @@ -0,0 +1,17 @@ > +// SPDX-License-Identifier: (GPL-2.0 or MIT) > +/* > + * Copyright (C) 2018 emtrion GmbH > + * Author: Jan Tuerk <jan.tuerk@...rion.com> > + */ > + > +/dts-v1/; > +#include "imx6q.dtsi" > +#include "imx6qdl-emcon.dtsi" > +/*Include camera2 pinmux*/ > +#include "imx6q-emcon.dtsi" > +#include "imx6qdl-emcon-avari.dtsi" > + > +/ { > + model = "emtrion SoM emCON-MX6 Dual/Quad on Avari"; > + compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q"; > +}; > diff --git a/arch/arm/boot/dts/imx6q-emcon.dtsi b/arch/arm/boot/dts/imx6q-emcon.dtsi > new file mode 100644 > index 000000000000..bd7d2aa4248e > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-emcon.dtsi > @@ -0,0 +1,28 @@ > +// SPDX-License-Identifier: (GPL-2.0 or MIT) > +/* > + * Copyright (C) 2018 emtrion GmbH > + * Author: Jan Tuerk <jan.tuerk@...rion.com> > + */ > + > +/ { > + model = "emtrion SoM emCON-MX6 Dual/Quad"; > + compatible = "emtrion,emcon-mx6", "fsl,imx6q"; > +}; > + > +&iomuxc { > + pinctrl_cpi2: csi1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x0b0b1 > + MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x1b0b1 > + MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x1b0b1 > + MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12 0x1b0b1 > + MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13 0x1b0b1 > + MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14 0x1b0b1 > + MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15 0x1b0b1 > + MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16 0x1b0b1 > + MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17 0x1b0b1 > + MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18 0x1b0b1 > + MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b1 > + >; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi > new file mode 100644 > index 000000000000..7fb870907ff8 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi > @@ -0,0 +1,208 @@ > +// SPDX-License-Identifier: (GPL-2.0 or MIT) > +/* > + * Copyright (C) 2018 emtrion GmbH > + * Author: Jan Tuerk <jan.tuerk@...rion.com> > + */ > + > +/ { > + aliases { > + mmc0 = &usdhc3; > + mmc2 = &usdhc1; > + mmc1 = &usdhc2; > + mmc3 = &usdhc4; > + boardID = &boardID; Why do you need this boardID alias? > + }; > + > + chosen { > + stdout-path = <&uart1>; > + }; > + > + memory@...00000 { > + reg = <0x10000000 0x40000000>; > + }; > + > + > + reg_wall_5p0: reg_wall5p0 { For fixed regulators, please use regulator-xxx as node name. > + compatible = "regulator-fixed"; > + regulator-name = "Main-Supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + reg_base3p3: reg_base3p3 { > + compatible = "regulator-fixed"; > + vin-supply = <®_wall_5p0>; > + regulator-name = "3V3-avari"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + reg_base1p5: reg_base1p5 { > + compatible = "regulator-fixed"; > + vin-supply = <®_base3p3>; > + regulator-name = "1V5-avari"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + reg_usb_otg: reg_otg_vbus { > + compatible = "regulator-fixed"; > + vin-supply = <®_wall_5p0>; > + regulator-name = "OTG_VBUS"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; > + regulator-always-on; > + }; > + > + > + clk_codec: clock-codec { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12000000>; > + }; > + > + sound { > + compatible = "fsl,imx-audio-sgtl5000"; > + model = "emCON-avari-sgtl5000"; > + ssi-controller = <&ssi2>; > + audio-codec = <&sgtl5000>; > + audio-routing = > + "Headphone Jack", "HP_OUT"; > + mux-int-port = <2>; > + mux-ext-port = <3>; > + }; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + /*Unused emCON-MX6 pingroups on AVARI baseboard, enable defaults*/ > + pinctrl-0 = < > + &pinctrl_emcon_gpio1 &pinctrl_emcon_gpio2 > + &pinctrl_emcon_gpio3 &pinctrl_emcon_gpio5 > + &pinctrl_emcon_gpio6 &pinctrl_emcon_gpio7 > + &pinctrl_emcon_gpio8 &pinctrl_emcon_irq_a > + &pinctrl_emcon_irq_b &pinctrl_emcon_irq_c > + &pinctrl_emcon_irq_pwr Can these GPIO pins be put into one single pinctrl_emcon_gpio entry? > &pinctrl_nor_flash > + &pinctrl_usdhc2 > + &pinctrl_spdif_out &pinctrl_spdif_in > + &pinctrl_cpi1 &pinctrl_cpi2 > + >; Again, please do not put consumer device specific pins in hog group. Also, it's confusing to have the same pinctrl in both hog and consumer device node, like pinctrl_nor_flash and pinctrl_usdhc2 here. > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + status = "okay"; > +}; > + > +&can1 { > + status = "okay"; > +}; > + > +&can2 { > + status = "okay"; > +}; > + > +&ecspi2 { > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c2>; > + status = "okay"; > +}; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + sgtl5000: audio-codec@a { > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + #sound-dai-cells = <0>; > + clocks = <&clk_codec>; > + VDDA-supply = <®_base3p3>; > + VDDIO-supply = <®_base3p3>; > + }; > + > + boardID: gpio@3a { > + compatible = "nxp,pca8574"; > + reg = <0x3a>; > + gpio-controller; > + #gpio-cells = <1>; > + }; > + > + captouch: touchscreen@38 { > + compatible = "edt,edt-ft5406"; > + reg = <0x38>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>; > + interrupt-parent = <&gpio6>; > + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; > + wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; > + wakeup-source; > + }; > +}; > + > +&pcie { > + status = "okay"; > +}; > + > +&rgb_encoder { > + status = "okay"; > +}; > + > +&rgb_panel { > + compatible = "edt,etm0700g0bdh6"; > + status = "okay"; > +}; > + > +&ssi2 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > + uart-has-rtscts; > +}; > + > +&uart3 { > + status = "okay"; > +}; > + > +&uart4 { > + status = "okay"; > +}; > + > +&uart5 { > + status = "okay"; > +}; > + > +&usbh1 { > + status = "okay"; > +}; > + > +&usbotg { > + status = "okay"; > +}; > + > +&usdhc1 { > + status = "okay"; > +}; > + > + > + > + Remove these end of file newlines. > diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi > new file mode 100644 > index 000000000000..32b9bfdc3c41 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi > @@ -0,0 +1,826 @@ > +// SPDX-License-Identifier: (GPL-2.0 or MIT) > +/* > + * Copyright (C) 2018 emtrion GmbH > + * Author: Jan Tuerk <jan.tuerk@...rion.com> > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pwm/pwm.h> > +#include <dt-bindings/input/input.h> > + > +/ { > + > + model = "emtrion SoM emCON-MX6"; > + compatible = "emtrion,emcon-mx6", "fsl,imx6q", "fsl,imx6dl"; > + > + aliases { > + mmc0 = &usdhc3; > + mmc2 = &usdhc1; > + mmc1 = &usdhc2; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_emcon_wake>; > + > + wake { > + label = "Wake"; > + linux,code = <KEY_WAKEUP>; > + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; > + wakeup-source; > + }; > + }; > + > + som_leds: leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_som_leds>; > + > + green { > + label = "som:green"; > + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + default-state = "on"; > + }; > + > + red { > + label = "som:red"; > + gpios = <&gpio3 1 GPIO_ACTIVE_LOW>; > + default-state = "keep"; > + }; > + > + }; > + > + lvds_backlight: lvds-backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lvds_bl>; > + enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; > + pwms = <&pwm1 0 50000>; > + brightness-levels = < > + 0 4 8 16 32 64 80 96 112 One tab indent is good enough. > + 128 144 160 176 250 > + >; Please align the close '>' with the beginning character of open '<' line, i.e. 'b'. > + default-brightness-level = <13>; > + status = "okay"; > + }; Have a newline between nodes. > + pwm_fan: pwm-fan { > + compatible = "pwm-fan"; > + cooling-min-state = <0>; > + cooling-max-state = <4>; > + #cooling-cells = <2>; > + pwms = <&pwm4 0 50000>; > + cooling-levels = <0 64 127 191 255>; > + status = "disabled"; > + }; > + > + > + rgb_encoder: parallel-display { display for node name. > + compatible = "fsl,imx-parallel-display"; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgb24_display>; > + status = "disabled"; > + > + port@0 { > + reg = <0>; > + > + rgb_encoder_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + rgb_encoder_out: endpoint { > + remote-endpoint = <&rgb_panel_in>; > + }; > + }; > + }; > + > + rgb_panel: panel { lcd for node name as suggested by Devicetree Specification? > + backlight = <&rgb_backlight>; > + power-supply = <®_parallel_disp>; > + > + port { > + rgb_panel_in: endpoint { > + remote-endpoint = <&rgb_encoder_out>; > + }; > + }; > + }; > + > + reg_parallel_disp: reg_parallel-display { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgb_bl_en>; > + regulator-name = "LCD-Supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_lvds_disp: reg_lvds-display { > + compatible = "regulator-fixed"; > + regulator-name = "LVDS-Supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + rgb_backlight: rgb-backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgb_bl>; > + enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; > + pwms = <&pwm3 0 5000000>; > + brightness-levels = < > + 250 176 160 144 128 112 > + 96 80 64 48 32 16 8 1 > + >; > + default-brightness-level = <13>; > + status = "okay"; > + }; > +}; > + > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_can1>; > +}; > + > +&can2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_can2>; > +}; > + > +&ecspi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi2>; > + cs-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>, One space after =. > + <&gpio2 26 GPIO_ACTIVE_HIGH>; Align the line with above one. > +}; > + > +&ecspi4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_nor_flash>; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rgmii"; > + phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; > + phy-reset-duration = <50>; > + phy-supply = <&vdd_1V8_reg>; > + phy-handle = <&ksz9031>; > + status = "okay"; > + > + One newline. > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ksz9031: phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + interrupt-parent = <&gpio1>; > + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; > + rxdv-skew-ps = <480>; > + txen-skew-ps = <480>; > + rxd0-skew-ps = <480>; > + rxd1-skew-ps = <480>; > + rxd2-skew-ps = <480>; > + rxd3-skew-ps = <480>; > + txd0-skew-ps = <420>; > + txd1-skew-ps = <420>; > + txd2-skew-ps = <360>; > + txd3-skew-ps = <360>; > + txc-skew-ps = <1020>; > + rxc-skew-ps = <960>; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + rtc: rtc@68 { Is the label actually used? If yes, I would suggest a more specific name like ds1307. > + compatible = "dallas,ds1307"; > + reg = <0x68>; > + }; > + > + da9063: pmic@58 { > + compatible = "dlg,da9063"; > + reg = <0x58>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + interrupt-parent = <&gpio2>; > + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; > + interrupt-controller; > + > + onkey { > + compatible = "dlg,da9063-onkey"; > + wakeup-source; > + }; > + > + wdt { s/wdt/watchdog. I remember I have already put this comment on previous version. > + compatible = "dlg,da9063-watchdog"; > + timeout-sec = <0>; > + }; > + > + regulators { > + vddcore_reg: bcore1 { > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1450000>; > + regulator-ramp-delay = <20000>; > + regulator-name = "DA9063_CORE"; > + regulator-always-on; > + }; > + > + vddsoc_reg: bcore2 { > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1450000>; > + regulator-ramp-delay = <20000>; > + regulator-name = "DA9063_SOC"; > + regulator-always-on; > + }; > + > + vdd_ddr3_reg: bpro { > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <20000>; > + regulator-always-on; > + }; > + > + vdd_3v3_reg: bperi { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <20000>; > + regulator-always-on; > + }; > + > + vdd_sata_reg: ldo3 { > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + vdd_mipi_reg: ldo4 { > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + vdd_mx6_snvs_reg: ldo5 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdd_hdmi_reg: ldo6 { > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vdd_pcie_reg: ldo7 { > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + vdd_1V8_reg: ldo8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vdd_3V3_sdc_reg: ldo9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdd_1V2_reg: ldo10 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > +}; > + > +&iomuxc { > + > + pinctrl_audmux: audmux { Please name the pinctrl node more consistently, maybe audmuxgrp to align with others? > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 > + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b060 > + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130B0 > + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b060 > + >; > + }; > + > + pinctrl_can1: can1grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 > + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 > + >; > + }; > + > + pinctrl_can2: can2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b1 > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b1 > + >; > + }; > + > + pinctrl_cpi1: csi0grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 > + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b1 > + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1 > + >; > + }; > + > + /*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/ > + > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 > + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 > + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 > + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 > + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 > + >; > + }; > + > + pinctrl_emcon_gpio1: emcongpio1 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_gpio2: emcongpio2 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_gpio3: emcongpio3 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_gpio4: emcongpio4 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_gpio5: emcongpio5 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_gpio6: emcongpio6 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_gpio7: emcongpio7 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_gpio8: emcongpio8 { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_irq_a: emconirqa { > + fsl,pins = < > + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_irq_b: emconirqb { > + fsl,pins = < > + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_irq_c: emconirqc { > + fsl,pins = < > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_irq_pwr: emconirqpwr { > + fsl,pins = < > + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0b0b1 > + >; > + }; > + > + pinctrl_emcon_wake: emconwake { > + fsl,pins = < > + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b030 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b030 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x4001a0b1 > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 > + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b058 > + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 > + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4000b070 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b870 > + >; > + }; > + > + pinctrl_irq_touch1: irqtouch1 { > + fsl,pins = < > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x0b0b1 > + >; > + }; Unused? > + > + pinctrl_irq_touch2: irqtouch2 { > + fsl,pins = < > + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x0b0b1 > + >; > + }; > + > + pinctrl_lvds_bl: lvdsbacklightgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x0b0b1 > + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b1 > + >; > + }; > + > + pinctrl_lvds_reg: lvdsreggrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x0b0b1 > + >; > + }; > + > + > + pinctrl_nor_flash: norflashgrp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b1 > + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 > + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 > + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 > + >; > + }; > + > + pinctrl_pcie_ctrl: pciegrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0b0b1 > + >; > + }; > + > + pinctrl_pwm_fan: pwmfan { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x0b0b1 > + >; > + }; > + > + pinctrl_rgb_bl: rgbbacklightgrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x0b0b1 > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b1 > + >; > + }; > + > + pinctrl_rgb_bl_en: rgbenable { > + fsl,pins = < > + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x0b0b1 > + >; > + }; > + > + pinctrl_rgb24_display: rgbgrp { > + fsl,pins = < > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 > + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 > + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 > + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 > + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 > + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 > + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 > + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 > + >; > + }; > + > + pinctrl_secure: securegrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 > + >; > + }; Unused? > + > + pinctrl_som_leds: somledgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x0b0b1 > + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x0b0b1 > + >; > + }; > + > + pinctrl_spdif_in: spdifin { > + fsl,pins = < > + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 > + >; > + }; > + > + pinctrl_spdif_out: spdifout { > + fsl,pins = < > + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 > + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 > + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 > + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart5: uart5grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 > + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usb_host1: usbhgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x1B058 > + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1B058 > + >; > + }; > + > + pinctrl_usb_otg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 > + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x17059 > + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x17059 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 > + MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b1 > + MX6QDL_PAD_DI0_PIN4__SD1_WP 0x1b0b1 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 > + MX6QDL_PAD_GPIO_4__SD2_CD_B 0x1b0b1 > + MX6QDL_PAD_GPIO_2__SD2_WP 0x1b0b1 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 > + >; > + }; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&rgb_encoder_in>; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie_ctrl>; > + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; > + disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&pwm3 { > + status = "okay"; > +}; > + > +&pwm4 { > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > +}; > + > +&uart5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart5>; > +}; > + > +&usbh1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb_host1>; > +}; > + > +&usbotg { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb_otg>; > + vbus-supply = <®_usb_otg>; > + dr_mode = "peripheral"; > +}; > + > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + fsl,wp-controller; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + fsl,wp-controller; > +}; > + > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + non-removable; > + bus-width = <8>; > + status = "okay"; > +}; > + > +/******device power Management*********/ > + > +&cpu0 { > + voltage-tolerance = <2>; > +}; > + > +®_arm { > + vin-supply = <&vddcore_reg>; > +}; > + > +®_soc { > + vin-supply = <&vddsoc_reg>; > +}; > + > +®_pu { > + vin-supply = <&vddsoc_reg>; > +}; > + > + > + One newline. Shawn > +/*******Disabled HW following***********/ > + > +&snvs_rtc { > + status = "disabled"; > +}; > -- > 2.11.0 >
Powered by blists - more mailing lists