[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAMz4kuJfjMkGSOU_E6eO0TV3mK7UZhfA0yQPqYa6Ffa0K+xp8Q@mail.gmail.com>
Date: Mon, 30 Apr 2018 16:06:18 +0800
From: Baolin Wang <baolin.wang@...aro.org>
To: Rob Herring <robh@...nel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Mark Rutland <mark.rutland@....com>,
Orson Zhai <orsonzhai@...il.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
"open list:HID CORE LAYER" <linux-input@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>, xiaotong.lu@...eadtrum.com
Subject: Re: [PATCH v3 1/2] dt-bindings: input: Add Add Spreadtrum SC27xx
vibrator documentation
Hi Rob,
On 27 April 2018 at 22:51, Rob Herring <robh@...nel.org> wrote:
> On Thu, Apr 26, 2018 at 05:12:33PM +0800, Baolin Wang wrote:
>> From: Xiaotong Lu <xiaotong.lu@...eadtrum.com>
>>
>> This patch adds the binding documentation for Spreadtrum SC27xx series
>> vibrator device.
>>
>> Signed-off-by: Xiaotong Lu <xiaotong.lu@...eadtrum.com>
>> Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
>> ---
>> Changes since v2:
>> - No updates.
>>
>> Changes since v1:
>> - No updates.
>> ---
>> .../bindings/input/sprd,sc27xx-vibra.txt | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
>> new file mode 100644
>> index 0000000..92ead29
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
>> @@ -0,0 +1,12 @@
>> +Spreadtrum SC27xx PMIC Vibrator
>> +
>> +Required properties:
>> +- compatible: should be "sprd,sc27xx-vibrator".
>> +- reg: address of vibrator control register.
>> +
>> +Example :
>> +
>> +vibrator@eb4 {
>> + compatible = "sprd,sc27xx-vibrator";
>> + reg = <0xeb4>;
>
> What bus is this on? A mmio bus needs a length. Is this part of some
> other block?
>
It's on one PMIC bus mapped by regmap-spi. Will add the PMIC part in
next version:
sc2731_pmic: pmic@0 {
compatible = "sprd,sc2731";
reg = <0>;
spi-max-frequency = <26000000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#address-cells = <1>;
#size-cells = <0>;
vibrator@eb4 {
compatible = "sprd,sc27xx-vibrator";
reg = <0xeb4>;
};
};
Is that OK for you? Thanks.
--
Baolin.wang
Best Regards
Powered by blists - more mailing lists