[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180501162050.GA4310@rob-hp-laptop>
Date: Tue, 1 May 2018 11:20:50 -0500
From: Rob Herring <robh@...nel.org>
To: Jagan Teki <jagan@...rulasolutions.com>
Cc: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, Icenowy Zheng <icenowy@...c.io>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
Michael Trimarchi <michael@...rulasolutions.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH 09/21] arm64: dts: allwinner: a64: Add HDMI support
On Mon, Apr 30, 2018 at 05:10:46PM +0530, Jagan Teki wrote:
> HDMI on Allwinner A64 has similar behavior like H3/H5, so
> reuse the same dts node details for A64.
>
> Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 +++++++++++++++++++++++++++
> include/dt-bindings/clock/sun50i-a64-ccu.h | 2 ++
> 2 files changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 67b80bbe5bf5..da9128ae836d 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -644,6 +644,34 @@
> #interrupt-cells = <3>;
> };
>
> + hdmi: hdmi@...0000 {
> + compatible = "allwinner,sun50i-a64-dw-hdmi",
> + "allwinner,sun8i-a83t-dw-hdmi";
> + reg = <0x01ee0000 0x10000>;
> + reg-io-width = <1>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
> + <&ccu CLK_HDMI>;
> + clock-names = "iahb", "isfr", "tmds";
> + resets = <&ccu RST_BUS_HDMI1>;
> + reset-names = "ctrl";
> + phys = <&hdmi_phy>;
> + phy-names = "hdmi-phy";
> + status = "disabled";
> + };
> +
> + hdmi_phy: hdmi-phy@...0000 {
> + compatible = "allwinner,sun50i-a64-hdmi-phy",
> + "allwinner,sun8i-h3-hdmi-phy";
> + reg = <0x01ef0000 0x10000>;
> + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
> + <&ccu CLK_PLL_VIDEO1>;
> + clock-names = "bus", "mod", "pll-0";
> + resets = <&ccu RST_BUS_HDMI0>;
> + reset-names = "phy";
> + #phy-cells = <0>;
HDMI is disabled by default, but the phy is not?
> + };
> +
> rtc: rtc@...0000 {
> compatible = "allwinner,sun6i-a31-rtc";
> reg = <0x01f00000 0x54>;
> diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
> index d66432c6e675..41c09df797ef 100644
> --- a/include/dt-bindings/clock/sun50i-a64-ccu.h
> +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
> @@ -45,6 +45,8 @@
>
> #define CLK_PLL_PERIPH0 11
>
> +#define CLK_PLL_VIDEO1 15
> +
This belongs in the clock binding patch.
> #define CLK_BUS_MIPI_DSI 28
> #define CLK_BUS_CE 29
> #define CLK_BUS_DMA 30
> --
> 2.14.3
>
Powered by blists - more mailing lists