[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <554c19f45bc6e716afb05551d6b8c41ad6bb9bc0.1525087679.git.satendra.t@samsung.com>
Date: Thu, 3 May 2018 16:27:05 +0530
From: Satendra Singh Thakur <satendra.t@...sung.com>
To: Eric Anholt <eric@...olt.net>, David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Cc: Satendra Singh Thakur <satendra.t@...sung.com>,
Madhur Verma <madhur.verma@...sung.com>,
Hemanshu Srivastava <hemanshu.s@...sung.com>
Subject: [PATCH 08/13] drm/kms/mode/pl111-display: using helper function
drm_display_mode_to_videomode for calculating timing parameters
To avoid duplicate logic for the same
Signed-off-by: Satendra Singh Thakur <satendra.t@...sung.com>
Cc: Madhur Verma <madhur.verma@...sung.com>
Cc: Hemanshu Srivastava <hemanshu.s@...sung.com>
---
drivers/gpu/drm/pl111/pl111_display.c | 40 +++++++++++++----------------------
1 file changed, 15 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 3106464..104f318 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -24,6 +24,7 @@
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_fb_cma_helper.h>
+#include <video/videomode.h>
#include "pl111_drm.h"
@@ -130,13 +131,14 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
struct drm_framebuffer *fb = plane->state->fb;
struct drm_connector *connector = priv->connector;
struct drm_bridge *bridge = priv->bridge;
+ struct videomode vm;
u32 cntl;
- u32 ppl, hsw, hfp, hbp;
- u32 lpp, vsw, vfp, vbp;
- u32 cpl, tim2;
+ u32 tim2;
int ret;
- ret = clk_set_rate(priv->clk, mode->clock * 1000);
+ drm_display_mode_to_videomode(mode, &vm);
+
+ ret = clk_set_rate(priv->clk, vm.pixelclock);
if (ret) {
dev_err(drm->dev,
"Failed to set pixel clock rate to %d: %d\n",
@@ -145,27 +147,15 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
clk_prepare_enable(priv->clk);
- ppl = (mode->hdisplay / 16) - 1;
- hsw = mode->hsync_end - mode->hsync_start - 1;
- hfp = mode->hsync_start - mode->hdisplay - 1;
- hbp = mode->htotal - mode->hsync_end - 1;
-
- lpp = mode->vdisplay - 1;
- vsw = mode->vsync_end - mode->vsync_start - 1;
- vfp = mode->vsync_start - mode->vdisplay;
- vbp = mode->vtotal - mode->vsync_end;
-
- cpl = mode->hdisplay - 1;
-
- writel((ppl << 2) |
- (hsw << 8) |
- (hfp << 16) |
- (hbp << 24),
+ writel((((vm.hactive >> 4) - 1) << 2) |
+ ((vm.hsync_len - 1) << 8) |
+ ((vm.hfront_porch - 1) << 16) |
+ ((vm.hback_porch - 1) << 24),
priv->regs + CLCD_TIM0);
- writel(lpp |
- (vsw << 10) |
- (vfp << 16) |
- (vbp << 24),
+ writel((vm.vactive - 1) |
+ ((vm.vsync_len - 1) << 10) |
+ ((vm.vfront_porch) << 16) |
+ ((vm.vback_porch) << 24),
priv->regs + CLCD_TIM1);
spin_lock(&priv->tim2_lock);
@@ -214,7 +204,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
tim2 ^= TIM2_IPC;
}
- tim2 |= cpl << 16;
+ tim2 |= (vm.hactive - 1) << 16;
writel(tim2, priv->regs + CLCD_TIM2);
spin_unlock(&priv->tim2_lock);
--
2.7.4
Powered by blists - more mailing lists