linux-kernel - Re: [PATCH v3] arm: exynos/s3c: dts: Remove leading 0x and 0s from bindings notation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CA+7wUswQDXZTXWFd=mwo8ehFxHkOp0UA-RuO_fVBzoj-7mutSg@mail.gmail.com>
Date:   Thu, 3 May 2018 20:58:25 +0200
From:   Mathieu Malaterre <malat@...ian.org>
To:     Krzysztof Kozlowski <krzk@...nel.org>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kukjin Kim <kgene@...nel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3] arm: exynos/s3c: dts: Remove leading 0x and 0s from
 bindings notation

On Thu, May 3, 2018 at 8:53 PM, Krzysztof Kozlowski <krzk@...nel.org> wrote:
> On Thu, May 03, 2018 at 08:44:53PM +0200, Mathieu Malaterre wrote:
>> Improve the DTS files by removing all the leading "0x" and zeros to fix the
>> following dtc warnings:
>>
>> Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
>>
>> and
>>
>> Warning (unit_address_format): Node /XXX unit name should not have leading 0s
>>
>> Converted using the following command:
>>
>> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed  -i -e "s/@\([0-9a-fA-FxX\.;:#]\+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0\+\(.*\) {/@\1 {/g" {} +
>
> The firmware node is fixed but in my case the command is doing much
> more:

Looks like I cannot copy/paste correctly, meant to say:

find . -type f \( -iname "*.dts" -o -iname "*.dtsi" \) -exec sed  -i
-e "s/@\([0-9a-fA-FxX\.;:#]\+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1
{/g" -e "s/@0\+\(.\+\) {/@\1 {/g" {} +

> -                       smp-sysram@0 {
> +                       smp-sysram@ {
>
> -                       port@0 {
> +                       port@ {
>
> Best regards,
> Krzysztof