linux-kernel - [PATCH 7/8] staging: mt7621-pci: remove some dead code.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <152540991631.12190.9879547396075931701.stgit@noble>
Date:   Fri, 04 May 2018 14:58:36 +1000
From:   NeilBrown <neil@...wn.name>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH 7/8] staging: mt7621-pci: remove some dead code.

Some code is dead because it is commented out.
Some is dead because it is uninteresting printks.
Some is dead because it declares unused functions.

Remove it all.

Signed-off-by: NeilBrown <neil@...wn.name>
---
 drivers/staging/mt7621-pci/pci-mt7621.c |   14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 5094e90eaf69..edd95013faf3 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -56,9 +56,6 @@
 
 #include <ralink_regs.h>
 
-extern void pcie_phy_init(void);
-extern void chk_phy_pll(void);
-
 /*
  * These functions and structures provide the BIOS scan and mapping of the PCI
  * devices.
@@ -364,11 +361,8 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 void
 set_pcie_phy(u32 *addr, int start_b, int bits, int val)
 {
-//	printk("0x%p:", addr);
-//	printk(" %x", *addr);
 	*(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
 	*(unsigned int *)(addr) |= val << start_b;
-//	printk(" -> %x\n", *addr);
 }
 
 void
@@ -497,7 +491,6 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 	val |= RALINK_PCIE2_RST;
 
 	ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
-	printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
 	*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
 	*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
@@ -513,12 +506,10 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 	val |= RALINK_PCIE2_RST;
 
 	DEASSERT_SYSRST_PCIE(val);
-	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
 	if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
 		bypass_pipe_rst();
 	set_phy_for_ssc();
-	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
 	read_config(0, 0, 0, 0x70c, &val);
 	printk("Port 0 N_FTS = %x\n", (unsigned int)val);
@@ -614,8 +605,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
 		break;
 	}
-	printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
-	//printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
 
 /*
 	ioport_resource.start = mt7621_res_pci_io1.start;
@@ -653,7 +642,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 	case 7:
 		read_config(0, 2, 0, 0x4, &val);
 		write_config(0, 2, 0, 0x4, val|0x4);
-		// write_config(0, 1, 0, 0x4, val|0x7);
 		read_config(0, 2, 0, 0x70c, &val);
 		val &= ~(0xff)<<8;
 		val |= 0x50<<8;
@@ -663,7 +651,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 	case 6:
 		read_config(0, 1, 0, 0x4, &val);
 		write_config(0, 1, 0, 0x4, val|0x4);
-		// write_config(0, 1, 0, 0x4, val|0x7);
 		read_config(0, 1, 0, 0x70c, &val);
 		val &= ~(0xff)<<8;
 		val |= 0x50<<8;
@@ -671,7 +658,6 @@ pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
 	default:
 		read_config(0, 0, 0, 0x4, &val);
 		write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
-		// write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
 		read_config(0, 0, 0, 0x70c, &val);
 		val &= ~(0xff)<<8;
 		val |= 0x50<<8;