linux-kernel - [PATCH V7 3/7] ARM: dts: imx6sx-sabreauto: add IO expander max7310 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1525588093-29994-3-git-send-email-Anson.Huang@nxp.com>
Date:   Sun,  6 May 2018 14:28:09 +0800
From:   Anson Huang <Anson.Huang@....com>
To:     shawnguo@...nel.org, kernel@...gutronix.de, fabio.estevam@....com,
        robh+dt@...nel.org, mark.rutland@....com, fugang.duan@....com,
        haibo.chen@....com, yibin.gong@....com, aisheng.dong@....com
Cc:     Linux-imx@....com, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH V7 3/7] ARM: dts: imx6sx-sabreauto: add IO expander max7310 support

i.MX6SX Sabre Auto board has two max7310 IO expander on I2C3 bus, add
support for them.

Signed-off-by: Anson Huang <Anson.Huang@....com>
---
changes since V6:
	remove unnecessary sign-off.
 arch/arm/boot/dts/imx6sx-sabreauto.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index ae253af..4d41b4d 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -73,6 +73,13 @@
 		>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA            0x4001b8b1
+			MX6SX_PAD_KEY_COL4__I2C3_SCL            0x4001b8b1
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
@@ -262,3 +269,24 @@
 		#gpio-cells = <2>;
 	};
 };
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	max7310_a: gpio@30 {
+		compatible = "maxim,max7310";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_b: gpio@32 {
+		compatible = "maxim,max7310";
+		reg = <0x32>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
-- 
2.7.4