| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1525688013-9928-1-git-send-email-akshu.agrawal@amd.com>
Date: Mon, 7 May 2018 18:13:31 +0800
From: Akshu Agrawal <akshu.agrawal@....com>
To: unlisted-recipients:; (no To-header on input)
Cc: djkurtz@...omium.org, akshu.agrawal@....com,
Alexander.Deucher@....com, mturquette@...libre.com,
sboyd@...nel.org, christian.koenig@....com, airlied@...hat.com,
Shaoyun.Liu@....com, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, rjw@...ysocki.net, lenb@...nel.org,
linux-acpi@...r.kernel.org
Subject: [PATCH v2 0/2] Add support for general system clock on ST AMD platform
AMD ST/CZ platform provides a general system clock which can be used
by any driver. Registration of this clock will done in clk-st driver.
While the ACPI misc device will create the required MMIO mappings
and pass the same to the clk-st driver. The clk-st driver will
use the address to enable/disable and set frequency.
Changelog:
v2:
clk: x86: Add ST oscout platform clock: v3->v4 unregister clk_hw
ACPI: APD: Add AMD misc clock handler support: No change (v2)
Akshu Agrawal (2):
clk: x86: Add ST oscout platform clock
ACPI: APD: Add AMD misc clock handler support
drivers/acpi/acpi_apd.c | 50 ++++++++++++++++++++
drivers/clk/x86/Makefile | 1 +
drivers/clk/x86/clk-st.c | 88 ++++++++++++++++++++++++++++++++++++
include/linux/platform_data/clk-st.h | 35 ++++++++++++++
4 files changed, 174 insertions(+)
create mode 100644 drivers/clk/x86/clk-st.c
create mode 100644 include/linux/platform_data/clk-st.h
--
1.9.1
Powered by blists - more mailing lists