linux-kernel - [PATCH 4/5] arm64: allwinner: h6: add USB3 device nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180507151817.55663-5-icenowy@aosc.io>
Date:   Mon,  7 May 2018 23:18:16 +0800
From:   Icenowy Zheng <icenowy@...c.io>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Kishon Vijay Abraham I <kishon@...com>,
        Felipe Balbi <balbi@...nel.org>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        linux-sunxi@...glegroups.com, Icenowy Zheng <icenowy@...c.io>
Subject: [PATCH 4/5] arm64: allwinner: h6: add USB3 device nodes

Allwinner H6 SoC features USB3 functionality, with a DWC3 controller and
a custom PHY.

Add device tree nodes for them.

Signed-off-by: Icenowy Zheng <icenowy@...c.io>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c72da8cd9ef5..9564c938717c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -174,6 +174,44 @@
 			status = "disabled";
 		};
 
+		usb3: usb@...0000 {
+			compatible = "allwinner,sun50i-h6-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&ccu CLK_BUS_XHCI>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_XHCI>;
+			reset-names = "bus";
+			status = "disabled";
+
+			dwc3: dwc3 {
+				compatible = "snps,dwc3";
+				reg = <0x5200000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				/*
+				 * According to Wink from Allwinner, the
+				 * USB3 port on H6 is not capable of OTG;
+				 * the datasheet doesn't mention OTG at all
+				 * either, so the dr_mode is default to
+				 * "host" here.
+				 */
+				dr_mode = "host";
+				phys = <&usb3phy>;
+				phy-names = "usb3-phy";
+				status = "disabled";
+			};
+		};
+
+		usb3phy: phy@...0000 {
+			compatible = "allwinner,sun50i-h6-usb3-phy";
+			reg = <0x5210000 0x10000>;
+			clocks = <&ccu CLK_USB_PHY1>;
+			resets = <&ccu RST_USB_PHY1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		r_ccu: clock@...0000 {
 			compatible = "allwinner,sun50i-h6-r-ccu";
 			reg = <0x07010000 0x400>;
-- 
2.17.0