lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180507235339.8836-1-bjorn.andersson@linaro.org>
Date:   Mon,  7 May 2018 16:53:39 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Zhang Rui <rui.zhang@...el.com>,
        Eduardo Valentin <edubezval@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Rajendra Nayak <rnayak@...eaurora.org>
Cc:     linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: [PATCH] thermal: qcom: tsens: Allow number of sensors to come from DT

For platforms that has multiple copies of the TSENS hardware block it's
necessary to be able to specify the number of sensors per block in DeviceTree.

Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
 .../devicetree/bindings/thermal/qcom-tsens.txt       |  1 +
 drivers/thermal/qcom/tsens.c                         | 12 +++++++++---
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 292ed89d900b..06195e8f35e2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -8,6 +8,7 @@ Required properties:
 
 - reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3f9fe6aa51cc..20f3b87d7667 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev)
 	struct tsens_device *tmdev;
 	const struct tsens_data *data;
 	const struct of_device_id *id;
+	u32 num_sensors;
 
 	if (pdev->dev.of_node)
 		dev = &pdev->dev;
@@ -130,18 +131,23 @@ static int tsens_probe(struct platform_device *pdev)
 	else
 		data = &data_8960;
 
-	if (data->num_sensors <= 0) {
+	num_sensors = data->num_sensors;
+
+	if (np)
+		of_property_read_u32(np, "#qcom,sensors", &num_sensors);
+
+	if (num_sensors <= 0) {
 		dev_err(dev, "invalid number of sensors\n");
 		return -EINVAL;
 	}
 
 	tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
-			     data->num_sensors * sizeof(*s), GFP_KERNEL);
+			     num_sensors * sizeof(*s), GFP_KERNEL);
 	if (!tmdev)
 		return -ENOMEM;
 
 	tmdev->dev = dev;
-	tmdev->num_sensors = data->num_sensors;
+	tmdev->num_sensors = num_sensors;
 	tmdev->ops = data->ops;
 	for (i = 0;  i < tmdev->num_sensors; i++) {
 		if (data->hw_ids)
-- 
2.17.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ