| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4284b38f-2c1e-1abd-8a0f-b3b6c90ceeed@samsung.com>
Date: Tue, 8 May 2018 11:03:14 +0200
From: Andrzej Hajda <a.hajda@...sung.com>
To: Peter Rosin <peda@...ntia.se>, linux-kernel@...r.kernel.org
Cc: Archit Taneja <architt@...eaurora.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
David Airlie <airlied@...ux.ie>,
Peter Senna Tschudin <peter.senna@...labora.com>,
Martin Donnelly <martin.donnelly@...com>,
Martyn Welch <martyn.welch@...labora.co.uk>,
Gustavo Padovan <gustavo@...ovan.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Sean Paul <seanpaul@...omium.org>,
Inki Dae <inki.dae@...sung.com>,
Joonyoung Shim <jy0922.shim@...sung.com>,
Seung-Woo Kim <sw0312.kim@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
CK Hu <ck.hu@...iatek.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Matthias Brugger <matthias.bgg@...il.com>,
Rob Clark <robdclark@...il.com>,
Sandy Huang <hjc@...k-chips.com>,
Heiko Stübner <heiko@...ech.de>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Vincent Abriou <vincent.abriou@...com>,
dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
linux-mediatek@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org, linux-renesas-soc@...r.kernel.org,
linux-rockchip@...ts.infradead.org, Jyri Sarha <jsarha@...com>,
Daniel Vetter <daniel@...ll.ch>
Subject: Re: [PATCH v2 26/26] drm/bridge: establish a link between the
bridge supplier and consumer
On 07.05.2018 15:43, Peter Rosin wrote:
> On 2018-05-07 14:59, Andrzej Hajda wrote:
>> On 04.05.2018 15:52, Peter Rosin wrote:
>>> If the bridge supplier is unbound, this will bring the bridge consumer
>>> down along with the bridge. Thus, there will no longer linger any
>>> dangling pointers from the bridge consumer (the drm_device) to some
>>> non-existent bridge supplier.
>> I understand rationales behind this patch, but it is another step into
>> making drm_dev one big driver with subcomponents, where drm will work
>> only if every subcomponent is working/loaded.
> The step is very small IMHO. Just a device-link, which is very easy to
> remove once whatever other solution is ready.
>
>> Do we need to go this way?
> If the drivers expect the parts to be there, and there is no other safety
> net in place if they are not, what is the (short-term) alternative?
>
>> In case of many platforms such approach results in display turned on
>> very late on boot for example due to late initialization of some
>> regulator exposed by some i2c device, which is used by hdmi bridge. And
>> this hdmi bridge is just to provide alternative(rarely used) display
>> path, the main display path would work anyway.
> This patch does not contribute to any late init and any such delay is not
> affected by this. At all.
>
>> So the main question to drm maintainers is about evolution of bridges,
>> if drm_bridges should become mandatory components of drm device or they
>> could be added/removed dynamically?
> That is a much bigger question than this patch/series. Conflating the
> two is not fair IMHO. You could run this very same argument for every
> driver that gets added, since any additional driver will just make it
> harder to make everything dynamic. Should we stop development right
> away?
>
> Besides, as long as the drm devices are in fact acting as big static
> drivers (built from smaller parts),
not true
> this should be considered a bug-fix
> that will prevent dereference of stale pointers.
>
> Or will some other solution appear and magically make all bridges and
> drm drivers capable of dynamic reconfiguration in the next few weeks?
> Yeah, right...
You are not changing single driver, you are changing framework and it
affects all the drivers using it, being more cautious about such patches
seems quite natural.
Anyway, I have realized that since drm_bridge_detach will remove the
link, so with properly written dynamic bridge removal, your patch should
not be a blocker.
Regards
Andrzej
>
> Cheers,
> Peter
>
>> Regards
>> Andrzej
>>
>>
>>> Signed-off-by: Peter Rosin <peda@...ntia.se>
>>> ---
>>> drivers/gpu/drm/drm_bridge.c | 18 ++++++++++++++++++
>>> include/drm/drm_bridge.h | 2 ++
>>> 2 files changed, 20 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
>>> index 78d186b6831b..0259f0a3ff27 100644
>>> --- a/drivers/gpu/drm/drm_bridge.c
>>> +++ b/drivers/gpu/drm/drm_bridge.c
>>> @@ -26,6 +26,7 @@
>>> #include <linux/mutex.h>
>>>
>>> #include <drm/drm_bridge.h>
>>> +#include <drm/drm_device.h>
>>> #include <drm/drm_encoder.h>
>>>
>>> #include "drm_crtc_internal.h"
>>> @@ -127,12 +128,25 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
>>> if (bridge->dev)
>>> return -EBUSY;
>>>
>>> + if (encoder->dev->dev != bridge->odev) {
>>> + bridge->link = device_link_add(encoder->dev->dev,
>>> + bridge->odev, 0);
>>> + if (!bridge->link) {
>>> + dev_err(bridge->odev, "failed to link bridge to %s\n",
>>> + dev_name(encoder->dev->dev));
>>> + return -EINVAL;
>>> + }
>>> + }
>>> +
>>> bridge->dev = encoder->dev;
>>> bridge->encoder = encoder;
>>>
>>> if (bridge->funcs->attach) {
>>> ret = bridge->funcs->attach(bridge);
>>> if (ret < 0) {
>>> + if (bridge->link)
>>> + device_link_del(bridge->link);
>>> + bridge->link = NULL;
>>> bridge->dev = NULL;
>>> bridge->encoder = NULL;
>>> return ret;
>>> @@ -159,6 +173,10 @@ void drm_bridge_detach(struct drm_bridge *bridge)
>>> if (bridge->funcs->detach)
>>> bridge->funcs->detach(bridge);
>>>
>>> + if (bridge->link)
>>> + device_link_del(bridge->link);
>>> + bridge->link = NULL;
>>> +
>>> bridge->dev = NULL;
>>> }
>>>
>>> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
>>> index b656e505d11e..804189c63a4c 100644
>>> --- a/include/drm/drm_bridge.h
>>> +++ b/include/drm/drm_bridge.h
>>> @@ -261,6 +261,7 @@ struct drm_bridge_timings {
>>> * @list: to keep track of all added bridges
>>> * @timings: the timing specification for the bridge, if any (may
>>> * be NULL)
>>> + * @link: drm consumer <-> bridge supplier
>>> * @funcs: control functions
>>> * @driver_private: pointer to the bridge driver's internal context
>>> */
>>> @@ -271,6 +272,7 @@ struct drm_bridge {
>>> struct drm_bridge *next;
>>> struct list_head list;
>>> const struct drm_bridge_timings *timings;
>>> + struct device_link *link;
>>>
>>> const struct drm_bridge_funcs *funcs;
>>> void *driver_private;
>>
>
>
>
Powered by blists - more mailing lists