linux-kernel - [PATCH 0/8] Tegra Combined UART driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180508114403.14499-1-mperttunen@nvidia.com>
Date:   Tue, 8 May 2018 14:43:55 +0300
From:   Mikko Perttunen <mperttunen@...dia.com>
To:     <robh+dt@...nel.org>, <mark.rutland@....com>,
        <jassisinghbrar@...il.com>, <gregkh@...uxfoundation.org>,
        <thierry.reding@...il.com>, <jonathanh@...dia.com>
CC:     <araza@...dia.com>, <devicetree@...r.kernel.org>,
        <linux-serial@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        Mikko Perttunen <mperttunen@...dia.com>
Subject: [PATCH 0/8] Tegra Combined UART driver

Hi all,

on Tegra194, the primary console UART is the "Tegra Combined UART",
or TCU. This is a "virtual UART", where each consumer communicates
with a central implementation over mailboxes. The central
implementation then multiplexes the streams and arbitrates use of
a hardware serial port. This driver implements the consumer portion
to allow using the primary console.

The series is split into the following parts:
* patches 1 and 2 add the device tree bindings for mailbox and tcu
  itself.
* patch 3 adds a blocking transmission option to the mailbox
  framework.
* patches 4 and 5 add support for the "shared mailbox" primitive
  to the Tegra HSP driver.
* patch 6 adds the TCU driver itself
* patches 7 and 8 do the necessary device tree changes.

The series has been tested on the Tegra194 P2972 board.

Thanks,
Mikko

Mikko Perttunen (8):
  dt-bindings: tegra186-hsp: Add shared interrupts
  dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
  mailbox: Add transmit done by blocking option
  mailbox: tegra-hsp: Refactor in preparation of mailboxes
  mailbox: tegra-hsp: Add support for shared mailboxes
  serial: Add Tegra Combined UART driver
  arm64: tegra: Add nodes for tcu on Tegra194
  arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888

 .../bindings/mailbox/nvidia,tegra186-hsp.txt       |   2 +
 .../bindings/serial/nvidia,tegra194-tcu.txt        |  35 +++
 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi     |   2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           |  34 ++-
 drivers/mailbox/mailbox.c                          |  30 +-
 drivers/mailbox/mailbox.h                          |   1 +
 drivers/mailbox/tegra-hsp.c                        | 320 +++++++++++++++++----
 drivers/tty/serial/Kconfig                         |   9 +
 drivers/tty/serial/Makefile                        |   1 +
 drivers/tty/serial/tegra-tcu.c                     | 302 +++++++++++++++++++
 include/uapi/linux/serial_core.h                   |   3 +
 11 files changed, 671 insertions(+), 68 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
 create mode 100644 drivers/tty/serial/tegra-tcu.c

-- 
2.16.1