[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180508132053.5471-1-peter.ujfalusi@ti.com>
Date: Tue, 8 May 2018 16:20:49 +0300
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: <tony@...mide.com>
CC: <bcousson@...libre.com>, <linux-omap@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<j-keerthy@...com>
Subject: [PATCH 0/4] ARM: dts: am437x boards: Correct (again) tps65218 irq type
Hi,
While based on the datasheet of tps65218 the INT is low active, the GIC_SPI
does not support anythin but IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING:
[ 2.761814] genirq: Setting trigger mode 8 for irq 102 failed (irq_chip_set_type_parent+0x0/0x30)
[ 2.770913] tps65218 0-0024: Failed to request IRQ 102 for tps65218: -22
[ 2.777854] tps65218: probe of 0-0024 failed with error -22
Use LEVEL_HIGH for the interrupt as it looks to be the correct setting:
INTn of tps65218 is connected to NMIn of the SoC.
The offending patches are only in linux-next.
Regards,
Peter
---
Peter Ujfalusi (4):
ARM: dts: am437x-gp-evm: Fixup (again) tps65218 irq type
ARM: dts: am437x-cm-t43: Fixup (again) tps65218 irq type
ARM: dts: am437x-epos-evm: Fixup (again) tps65218 irq type
Revert "ARM: dts: am437x-sk-evm: Correct tps65218 irq type"
arch/arm/boot/dts/am437x-cm-t43.dts | 2 +-
arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists