Message-Id: <20180509170159.29682-8-ilina@codeaurora.org>
Date:   Wed,  9 May 2018 11:01:56 -0600
From:   Lina Iyer <ilina@...eaurora.org>
To:     andy.gross@...aro.org, david.brown@...aro.org,
        linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org
Cc:     rnayak@...eaurora.org, bjorn.andersson@...aro.org,
        linux-kernel@...r.kernel.org, sboyd@...nel.org,
        evgreen@...omium.org, dianders@...omium.org, mka@...omium.org,
        rplsssn@...eaurora.org, Lina Iyer <ilina@...eaurora.org>
Subject: [PATCH v8 07/10] drivers: qcom: rpmh: cache sleep/wake state requests

Active state requests are sent immediately to the RSC controller, while
sleep and wake state requests are cached in this driver to avoid taxing
the RSC controller repeatedly. The cached values will be sent to the
controller when the rpmh_flush() is called.

Generally, flushing is a system PM activity and may be called from the
system PM drivers when the system is entering suspend or deeper sleep
modes during cpuidle.

Also allow invalidating the cached requests, so they may be re-populated
again.

Signed-off-by: Lina Iyer <ilina@...eaurora.org>
Reviewed-by: Evan Green <evgreen@...omium.org>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---

Changes in v6:
	- replace rpmh_client with device *

Changes in v4:
	- remove locking for ->dirty in invalidate
	- fix send_single
Changes in v3:
	- Remove locking for flush function
	- Improve comments
---
 drivers/soc/qcom/rpmh.c | 217 +++++++++++++++++++++++++++++++++++++++-
 include/soc/qcom/rpmh.h |  11 ++
 2 files changed, 223 insertions(+), 5 deletions(-)

diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index 74bb82339b01..23fcbd9487cd 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -7,10 +7,12 @@
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
+#include <linux/list.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <linux/types.h>
 #include <linux/wait.h>
 
@@ -33,6 +35,21 @@
 		.dev = dev,				\
 	}
 
+/**
+ * struct cache_req: the request object for caching
+ *
+ * @addr: the address of the resource
+ * @sleep_val: the sleep vote
+ * @wake_val: the wake vote
+ * @list: linked list obj
+ */
+struct cache_req {
+	u32 addr;
+	u32 sleep_val;
+	u32 wake_val;
+	struct list_head list;
+};
+
 /**
  * struct rpmh_request: the message to be sent to rpmh-rsc
  *
@@ -54,9 +71,15 @@ struct rpmh_request {
  * struct rpmh_ctrlr: our representation of the controller
  *
  * @drv: the controller instance
+ * @cache: the list of cached requests
+ * @lock: synchronize access to the controller data
+ * @dirty: was the cache updated since flush
  */
 struct rpmh_ctrlr {
 	struct rsc_drv *drv;
+	struct list_head cache;
+	spinlock_t lock;
+	bool dirty;
 };
 
 static struct rpmh_ctrlr rpmh_rsc[RPMH_MAX_CTRLR];
@@ -91,6 +114,8 @@ static struct rpmh_ctrlr *get_rpmh_ctrlr(const struct device *dev)
 				break;
 			}
 			rpmh_rsc[i].drv = drv;
+			spin_lock_init(&rpmh_rsc[i].lock);
+			INIT_LIST_HEAD(&rpmh_rsc[i].cache);
 			ctrlr = &rpmh_rsc[i];
 			break;
 		}
@@ -118,29 +143,109 @@ void rpmh_tx_done(const struct tcs_request *msg, int r)
 }
 EXPORT_SYMBOL(rpmh_tx_done);
 
+static struct cache_req *__find_req(struct rpmh_ctrlr *ctrlr, u32 addr)
+{
+	struct cache_req *p, *req = NULL;
+
+	list_for_each_entry(p, &ctrlr->cache, list) {
+		if (p->addr == addr) {
+			req = p;
+			break;
+		}
+	}
+
+	return req;
+}
+
+static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
+					   enum rpmh_state state,
+					   struct tcs_cmd *cmd)
+{
+	struct cache_req *req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctrlr->lock, flags);
+	req = __find_req(ctrlr, cmd->addr);
+	if (req)
+		goto existing;
+
+	req = kzalloc(sizeof(*req), GFP_ATOMIC);
+	if (!req) {
+		req = ERR_PTR(-ENOMEM);
+		goto unlock;
+	}
+
+	req->addr = cmd->addr;
+	req->sleep_val = req->wake_val = UINT_MAX;
+	INIT_LIST_HEAD(&req->list);
+	list_add_tail(&req->list, &ctrlr->cache);
+
+existing:
+	switch (state) {
+	case RPMH_ACTIVE_ONLY_STATE:
+		if (req->sleep_val != UINT_MAX)
+			req->wake_val = cmd->data;
+		break;
+	case RPMH_WAKE_ONLY_STATE:
+		req->wake_val = cmd->data;
+		break;
+	case RPMH_SLEEP_STATE:
+		req->sleep_val = cmd->data;
+		break;
+	default:
+		break;
+	};
+
+	ctrlr->dirty = true;
+unlock:
+	spin_unlock_irqrestore(&ctrlr->lock, flags);
+
+	return req;
+}
+
 /**
- * __rpmh_write: send the RPMH request
+ * __rpmh_write: Cache and send the RPMH request
  *
  * @dev: The device making the request
  * @state: Active/Sleep request type
  * @rpm_msg: The data that needs to be sent (cmds).
+ *
+ * Cache the RPMH request and send if the state is ACTIVE_ONLY.
+ * SLEEP/WAKE_ONLY requests are not sent to the controller at
+ * this time. Use rpmh_flush() to send them to the controller.
  */
 static int __rpmh_write(const struct device *dev, enum rpmh_state state,
 			struct rpmh_request *rpm_msg)
 {
 	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	int ret = -EINVAL;
+	struct cache_req *req;
+	int i;
 
 	if (IS_ERR(ctrlr))
 		return PTR_ERR(ctrlr);
 
 	rpm_msg->msg.state = state;
 
-	if (state != RPMH_ACTIVE_ONLY_STATE)
-		return -EINVAL;
+	/* Cache the request in our store and link the payload */
+	for (i = 0; i < rpm_msg->msg.num_cmds; i++) {
+		req = cache_rpm_request(ctrlr, state, &rpm_msg->msg.cmds[i]);
+		if (IS_ERR(req))
+			return PTR_ERR(req);
+	}
+
+	rpm_msg->msg.state = state;
 
-	WARN_ON(irqs_disabled());
+	if (state == RPMH_ACTIVE_ONLY_STATE) {
+		WARN_ON(irqs_disabled());
+		ret = rpmh_rsc_send_data(ctrlr->drv, &rpm_msg->msg);
+	} else {
+		ret = rpmh_rsc_write_ctrl_data(ctrlr->drv, &rpm_msg->msg);
+		/* Clean up our call by spoofing tx_done */
+		rpmh_tx_done(&rpm_msg->msg, ret);
+	}
 
-	return rpmh_rsc_send_data(ctrlr->drv, &rpm_msg->msg);
+	return ret;
 }
 
 /**
@@ -174,3 +279,105 @@ int rpmh_write(const struct device *dev, enum rpmh_state state,
 	return (ret > 0) ? 0 : -ETIMEDOUT;
 }
 EXPORT_SYMBOL(rpmh_write);
+
+static int is_req_valid(struct cache_req *req)
+{
+	return (req->sleep_val != UINT_MAX &&
+		req->wake_val != UINT_MAX &&
+		req->sleep_val != req->wake_val);
+}
+
+static int send_single(const struct device *dev, enum rpmh_state state,
+		       u32 addr, u32 data)
+{
+	DEFINE_RPMH_MSG_ONSTACK(dev, state, NULL, rpm_msg);
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+
+	if (IS_ERR(ctrlr))
+		return PTR_ERR(ctrlr);
+
+	/* Wake sets are always complete and sleep sets are not */
+	rpm_msg.msg.wait_for_compl = (state == RPMH_WAKE_ONLY_STATE);
+	rpm_msg.cmd[0].addr = addr;
+	rpm_msg.cmd[0].data = data;
+	rpm_msg.msg.num_cmds = 1;
+
+	return rpmh_rsc_write_ctrl_data(ctrlr->drv, &rpm_msg.msg);
+}
+
+/**
+ * rpmh_flush: Flushes the buffered active and sleep sets to TCS
+ *
+ * @dev: The device making the request
+ *
+ * Return: -EBUSY if the controller is busy, probably waiting on a response
+ * to a RPMH request sent earlier.
+ *
+ * This function is generally called from the sleep code from the last CPU
+ * that is powering down the entire system. Since no other RPMH API would be
+ * executing at this time, it is safe to run lockless.
+ */
+int rpmh_flush(const struct device *dev)
+{
+	struct cache_req *p;
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	int ret;
+
+	if (IS_ERR(ctrlr))
+		return PTR_ERR(ctrlr);
+
+	if (!ctrlr->dirty) {
+		pr_debug("Skipping flush, TCS has latest data.\n");
+		return 0;
+	}
+
+	/*
+	 * Nobody else should be calling this function other than system PM,
+	 * hence we can run without locks.
+	 */
+	list_for_each_entry(p, &ctrlr->cache, list) {
+		if (!is_req_valid(p)) {
+			pr_debug("%s: skipping RPMH req: a:%#x s:%#x w:%#x",
+				 __func__, p->addr, p->sleep_val, p->wake_val);
+			continue;
+		}
+		ret = send_single(dev, RPMH_SLEEP_STATE, p->addr, p->sleep_val);
+		if (ret)
+			return ret;
+		ret = send_single(dev, RPMH_WAKE_ONLY_STATE,
+				  p->addr, p->wake_val);
+		if (ret)
+			return ret;
+	}
+
+	ctrlr->dirty = false;
+
+	return 0;
+}
+EXPORT_SYMBOL(rpmh_flush);
+
+/**
+ * rpmh_invalidate: Invalidate all sleep and active sets
+ * sets.
+ *
+ * @dev: The device making the request
+ *
+ * Invalidate the sleep and active values in the TCS blocks.
+ */
+int rpmh_invalidate(const struct device *dev)
+{
+	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+	int ret;
+
+	if (IS_ERR(ctrlr))
+		return PTR_ERR(ctrlr);
+
+	ctrlr->dirty = true;
+
+	do {
+		ret = rpmh_rsc_invalidate(ctrlr->drv);
+	} while (ret == -EAGAIN);
+
+	return ret;
+}
+EXPORT_SYMBOL(rpmh_invalidate);
diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
index c1d0f902bd71..42e62a0d26d8 100644
--- a/include/soc/qcom/rpmh.h
+++ b/include/soc/qcom/rpmh.h
@@ -14,12 +14,23 @@
 int rpmh_write(const struct device *dev, enum rpmh_state state,
 	       const struct tcs_cmd *cmd, u32 n);
 
+int rpmh_flush(const struct device *dev);
+
+int rpmh_invalidate(const struct device *dev);
+
 #else
 
 static inline int rpmh_write(const struct device *dev, enum rpmh_state state,
 			     const struct tcs_cmd *cmd, u32 n)
 { return -ENODEV; }
 
+
+static inline int rpmh_flush(const struct device *dev)
+{ return -ENODEV; }
+
+static inline int rpmh_invalidate(const struct device *dev)
+{ return -ENODEV; }
+
 #endif /* CONFIG_QCOM_RPMH */
 
 #endif /* __SOC_QCOM_RPMH_H__ */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Powered by blists - more mailing lists