linux-kernel - [PATCH v2 6/7] usb: mtu3: re-enable controller to accept LPM request after LPM resume

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5ebd9e0bfbf3dcb7312b931849d2bd639c170673.1525930818.git.chunfeng.yun@mediatek.com>
Date:   Thu, 10 May 2018 13:47:11 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Felipe Balbi <felipe.balbi@...ux.intel.com>
CC:     Matthias Brugger <matthias.bgg@...il.com>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        <linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>
Subject: [PATCH v2 6/7] usb: mtu3: re-enable controller to accept LPM request after LPM resume

After the controller receives a LPM request, it will reject the LPM
request, and need software to re-enable it after LPM resume if the
controller doesn't remote wakeup from L1 automatically

Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
v2:
    add this patch
---
 drivers/usb/mtu3/mtu3_core.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index b1b99a8..65ff53a 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -176,7 +176,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu)
 	mtu3_writel(mbase, U3D_LV1IESR, value);
 
 	/* Enable U2 common USB interrupts */
-	value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
+	value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR;
 	mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);
 
 	if (mtu->is_u3_ip) {
@@ -692,6 +692,12 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
 	if (u2comm & RESET_INTR)
 		mtu3_gadget_reset(mtu);
 
+	if (u2comm & LPM_RESUME_INTR) {
+		if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE))
+			mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL,
+				     LPM_U3_ACK_EN);
+	}
+
 	return IRQ_HANDLED;
 }
 
-- 
1.9.1