linux-kernel - Re: Delivery Status Notification (Failure)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 11 May 2018 17:07:37 +0530
From:   Pintu Kumar <pintu.ping@...il.com>
To:     open list <linux-kernel@...r.kernel.org>,
        linux-arm-kernel@...ts.infradead.org,
        Russell King - ARM Linux <linux@...linux.org.uk>,
        kernelnewbies@...nelnewbies.org
Subject: Re: Delivery Status Notification (Failure)

Hi,

I need one help.
I am using i.MX7 Sabre board with kernel version 4.1.15

Let's say I am interested in GPIO number: 21
I wanted to set CPU affinity for particular GPIO->IRQ number, so I
tried the below steps:
root@10:~# echo 21 > /sys/class/gpio/export
root@10:~# echo "rising" > /sys/class/gpio/gpio21/edge
root@10:~# cat /proc/interrupts | grep 21
  47: 0 0 gpio-mxc 21 Edge gpiolib
root@10:~# cat /sys/class/gpio/gpio21/direction
in
root@10:~# cat /proc/irq/47/smp_affinity
3
root@10:~# echo 2 > /proc/irq/47/smp_affinity
-bash: echo: write error: Input/output error

But I get input/output error.
When I debug further, found that irq_can_set_affinity is returning 0:
[    0.000000] genirq: irq_can_set_affinity (0): balance: 1,
irq_data.chip: a81b7e48, irq_set_affinity:   (null)
[    0.000000] write_irq_affinity: FAIL

I also tried first setting /proc/irq/default_smp_affinity to 2 (from 3).
This change is working, but the smp_affinity setting for the new IRQ
is not working.

When I try to set smp_affinity for mmc0, then it works.
# cat /proc/interrupts | grep mmc
295:         55          0     GPCV2  22 Edge      mmc0
296:          0          0     GPCV2  23 Edge      mmc1
297:         52          0     GPCV2  24 Edge      mmc2

root@10:~# echo 2 > /proc/irq/295/smp_affinity
root@10:~#

So, I wanted to know what are the conditions for which setting
smp_affinity for an IRQ will work ?

Is there any way by which I can set CPU affinity to a GPIO -> IRQ ?
Whether, irq_set_affinity_hint() will work in this case ?

Thanks,
Pintu