[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180511144140.GO33053@art_vandelay>
Date: Fri, 11 May 2018 10:41:40 -0400
From: Sean Paul <seanpaul@...omium.org>
To: Lin Huang <hl@...k-chips.com>
Cc: seanpaul@...omium.org, airlied@...ux.ie, zyw@...k-chips.com,
dianders@...omium.org, briannorris@...omium.org,
linux-rockchip@...ts.infradead.org, heiko@...ech.de,
daniel.vetter@...el.com, jani.nikula@...ux.intel.com,
dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
eballetbo@...il.com
Subject: Re: [PATCH v2 2/4] phy: rockchip-typec: support variable phy config
value
On Wed, May 09, 2018 at 06:22:42PM +0800, Lin Huang wrote:
> the phy config values used to fix in dp firmware, but some boards
> need change these values to do training and get the better eye diagram
> result. So support that in phy driver.
>
FTR, I've previously reviewed this at
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/985573
This patch should come _after_ the dt binding addition.
> Signed-off-by: Chris Zhong <zyw@...k-chips.com>
> Signed-off-by: Lin Huang <hl@...k-chips.com>
> ---
> Changes in v2:
> - update patch following Enric suggest
>
> drivers/phy/rockchip/phy-rockchip-typec.c | 284 +++++++++++++++++++-----------
> include/soc/rockchip/rockchip_phy_typec.h | 64 +++++++
> 2 files changed, 250 insertions(+), 98 deletions(-)
> create mode 100644 include/soc/rockchip/rockchip_phy_typec.h
>
/snip
> diff --git a/include/soc/rockchip/rockchip_phy_typec.h b/include/soc/rockchip/rockchip_phy_typec.h
> new file mode 100644
> index 0000000..4a328221
> --- /dev/null
> +++ b/include/soc/rockchip/rockchip_phy_typec.h
> @@ -0,0 +1,64 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
> + * Author: Lin Huang <hl@...k-chips.com>
> + */
> +
> +#ifndef __SOC_ROCKCHIP_PHY_TYPEC_H
> +#define __SOC_ROCKCHIP_PHY_TYPEC_H
> +
> +struct usb3phy_reg {
> + u32 offset;
> + u32 enable_bit;
> + u32 write_enable;
> +};
> +
> +/**
> + * struct rockchip_usb3phy_port_cfg: usb3-phy port configuration.
> + * @reg: the base address for usb3-phy config.
> + * @typec_conn_dir: the register of type-c connector direction.
> + * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
> + * @external_psm: the register of type-c phy external psm clock.
> + * @pipe_status: the register of type-c phy pipe status.
> + * @usb3_host_disable: the register of type-c usb3 host disable.
> + * @usb3_host_port: the register of type-c usb3 host port.
> + * @uphy_dp_sel: the register of type-c phy DP select control.
> + */
> +struct rockchip_usb3phy_port_cfg {
> + unsigned int reg;
> + struct usb3phy_reg typec_conn_dir;
> + struct usb3phy_reg usb3tousb2_en;
> + struct usb3phy_reg external_psm;
> + struct usb3phy_reg pipe_status;
> + struct usb3phy_reg usb3_host_disable;
> + struct usb3phy_reg usb3_host_port;
> + struct usb3phy_reg uphy_dp_sel;
> +};
> +
> +struct phy_config {
> + int swing;
> + int pe;
> +};
> +
> +struct rockchip_typec_phy {
> + struct device *dev;
> + void __iomem *base;
> + struct extcon_dev *extcon;
> + struct regmap *grf_regs;
> + struct clk *clk_core;
> + struct clk *clk_ref;
> + struct reset_control *uphy_rst;
> + struct reset_control *pipe_rst;
> + struct reset_control *tcphy_rst;
> + const struct rockchip_usb3phy_port_cfg *port_cfgs;
> + /* mutex to protect access to individual PHYs */
> + struct mutex lock;
> + struct phy_config config[3][4];
> + u8 need_software_training;
I thought we decided to always do sw training and then fallback to fw training.
If so, we don't need this.
Sean
> + bool flip;
> + u8 mode;
> + int (*typec_phy_config)(struct phy *phy, int link_rate,
> + int lanes, u8 swing, u8 pre_emp);
> +};
> +
> +#endif
> --
> 2.7.4
>
--
Sean Paul, Software Engineer, Google / Chromium OS
Powered by blists - more mailing lists