[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56ca63ce-d609-5bb7-f38c-17d875496bd5@ti.com>
Date: Fri, 11 May 2018 13:51:28 -0500
From: Dan Murphy <dmurphy@...com>
To: Andrew Lunn <andrew@...n.ch>
CC: <f.fainelli@...il.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3] net: phy: DP83TC811: Introduce support for the
DP83TC811 phy
Andrew
On 05/11/2018 01:30 PM, Andrew Lunn wrote:
> On Fri, May 11, 2018 at 01:08:19PM -0500, Dan Murphy wrote:
>> Add support for the DP83811 phy.
>>
>> The DP83811 supports both rgmii and sgmii interfaces.
>> There are 2 part numbers for this the DP83TC811R does not
>> reliably support the SGMII interface but the DP83TC811S will.
>>
>> There is not a way to differentiate these parts from the
>> hardware or register set. So this is controlled via the DT
>> to indicate which phy mode is required. Or the part can be
>> strapped to a certain interface.
>>
>> Data sheet can be found here:
>> http://www.ti.com/product/DP83TC811S-Q1/description
>> http://www.ti.com/product/DP83TC811R-Q1/description
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>
> Hi Dan
>
> It is normal to add any Reviewed-by, or Tested-by: tags you received,
> so long as you don't make major changes.
>
Thanks for the reminder.
I usually add them if I get them explicitly stated in the review.
I have not seen any Reviewed-by or Tested-by tags in any of the replies for the
patch. But I may have missed it.
Dan
> Andrew
>
--
------------------
Dan Murphy
Powered by blists - more mailing lists