| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180514212434.17514-12-johnfwhitmore@gmail.com>
Date: Mon, 14 May 2018 22:24:18 +0100
From: John Whitmore <johnfwhitmore@...il.com>
To: gregkh@...uxfoundation.org
Cc: kstewart@...uxfoundation.org, colin.king@...onical.com,
tglx@...utronix.de, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org,
John Whitmore <johnfwhitmore@...il.com>
Subject: [PATCH 11/27] drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc: corrected block comments
Coding style edit to clear the checkpatch.pl Warnings:
WARNING: Block comments should align the * on each line
Signed-off-by: John Whitmore <johnfwhitmore@...il.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 181 +++++++++++----------
1 file changed, 97 insertions(+), 84 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 3342c9ccec3f..425ea1279b87 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -213,8 +213,8 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
}
/*
-* Return: true if station in half n mode and AP supports 40 bw
-*/
+ * Return: true if station in half n mode and AP supports 40 bw
+ */
static bool IsHTHalfNmode40Bandwidth(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -390,14 +390,15 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_IOT, "Joseph debug!! IOTPEER: %x\n", pHTInfo->IOTPeer);
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
* at receiving MCS14~15 frame from some AP.
* input: struct ieee80211_device* ieee
* u8 * PeerMacAddr
* output: none
* return: return 1 if driver should declare MCS13 only(otherwise return 0)
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
{
return 0;
@@ -405,17 +406,17 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
/**
-* Function: HTIOTActIsDisableMCS15
-*
-* Overview: Check whether driver should declare capability of receiving MCS15
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable MCS15
-* 2008.04.15 Emily
-*/
+ * Function: HTIOTActIsDisableMCS15
+ *
+ * Overview: Check whether driver should declare capability of receiving MCS15
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable MCS15
+ * 2008.04.15 Emily
+ */
static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -442,17 +443,17 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
}
/**
-* Function: HTIOTActIsDisableMCSTwoSpatialStream
-*
-* Overview: Check whether driver should declare capability of receiving All 2 ss packets
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable all two spatial stream packet
-* 2008.04.21 Emily
-*/
+ * Function: HTIOTActIsDisableMCSTwoSpatialStream
+ *
+ * Overview: Check whether driver should declare capability of receiving All 2 ss packets
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable all two spatial stream packet
+ * 2008.04.21 Emily
+ */
static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{
@@ -462,25 +463,27 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
return false;
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: Check whether driver should disable EDCA turbo mode
* input: struct ieee80211_device* ieee
* u8* PeerMacAddr
* output: none
* return: return 1 if driver should disable EDCA turbo mode(otherwise return 0)
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{ /* default enable EDCA Turbo mode. */
return false;
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: Check whether we need to use OFDM to sned MGNT frame for broadcom AP
* input: struct ieee80211_network *network //current network we live
* output: none
* return: return 1 if true
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
{
u8 retValue = 0;
@@ -515,7 +518,7 @@ void HTResetIOTSetting(
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: Construct Capablility Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
* u8* posHTCap //pointer to store Capability Ele
@@ -524,7 +527,8 @@ void HTResetIOTSetting(
* output: none
* return: none
* notice: posHTCap can't be null and should be initialized before.
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -625,7 +629,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
return;
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: Construct Information Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
* u8* posHTCap //pointer to store Information Ele
@@ -634,7 +638,8 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
* output: none
* return: none
* notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -677,24 +682,24 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}
/*
- * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
- * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
- * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
- * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
- * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
- * at the same time.
- *
- * Frame Format
- * Element ID Length OUI Type1 Reserved
- * 1 byte 1 byte 3 bytes 1 byte 1 byte
- *
- * OUI = 0x00, 0xe0, 0x4c,
- * Type = 0x02
- * Reserved = 0x00
- *
- * 2007.8.21 by Emily
-*/
-/********************************************************************************************************************
+ * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
+ * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
+ * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
+ * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
+ * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
+ * at the same time.
+ *
+ * Frame Format
+ * Element ID Length OUI Type1 Reserved
+ * 1 byte 1 byte 3 bytes 1 byte 1 byte
+ *
+ * OUI = 0x00, 0xe0, 0x4c,
+ * Type = 0x02
+ * Reserved = 0x00
+ *
+ * 2007.8.21 by Emily
+ */
+/*******************************************************************************
*function: Construct Information Element in Beacon... in RT2RT condition
* input: struct ieee80211_device* ieee
* u8* posRT2RTAgg //pointer to store Information Ele
@@ -702,7 +707,8 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
* output: none
* return: none
* notice:
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len)
{
if (posRT2RTAgg == NULL) {
@@ -750,13 +756,14 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: Pick the right Rate Adaptive table to use
* input: struct ieee80211_device* ieee
* u8* pOperateMCS //A pointer to MCS rate bitmap
* return: always we return true
* notice:
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
@@ -801,24 +808,25 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
}
/*
-* Description:
-* This function will get the highest speed rate in input MCS set.
-*
-* /param Adapter Pionter to Adapter entity
-* pMCSRateSet Pointer to MCS rate bitmap
-* pMCSFilter Pointer to MCS rate filter
-*
-* /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
-*
-*/
-/********************************************************************************************************************
+ * Description:
+ * This function will get the highest speed rate in input MCS set.
+ *
+ * /param Adapter Pionter to Adapter entity
+ * pMCSRateSet Pointer to MCS rate bitmap
+ * pMCSFilter Pointer to MCS rate filter
+ *
+ * /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
+ *
+ */
+/*******************************************************************************
*function: This function will get the highest speed rate in input MCS set.
* input: struct ieee80211_device* ieee
* u8* pMCSRateSet //Pointer to MCS rate bitmap
* u8* pMCSFilter //Pointer to MCS rate filter
* return: Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter
* notice:
- * *****************************************************************************************************************/
+ *******************************************************************************
+ */
u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSFilter)
{
u8 i, j;
@@ -858,14 +866,14 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
/*
-**
-**1.Filter our operation rate set with AP's rate set
-**2.shall reference channel bandwidth, STBC, Antenna number
-**3.generate rate adative table for firmware
-**David 20060906
-**
-** \pHTSupportedCap: the connected STA's supported rate Capability element
-*/
+ *
+ * 1.Filter our operation rate set with AP's rate set
+ * 2.shall reference channel bandwidth, STBC, Antenna number
+ * 3.generate rate adative table for firmware
+ * David 20060906
+ *
+ * \pHTSupportedCap: the connected STA's supported rate Capability element
+ */
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
@@ -1068,13 +1076,15 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
}
void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
-/********************************************************************************************************************
+/*******************************************************************************
*function: initialize HT info(struct PRT_HIGH_THROUGHPUT)
* input: struct ieee80211_device* ieee
* output: none
* return: none
- * notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP
-********************************************************************************************************************/
+ * notice: This function is called when * (1) MPInitialization Phase
+ * * (2) Receiving of Deauthentication from AP
+ *******************************************************************************
+ */
// TODO: Should this funciton be called when receiving of Disassociation?
void HTInitializeHTInfo(struct ieee80211_device *ieee)
{
@@ -1138,13 +1148,14 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
RegHTSuppRateSets[4] = 0x01; //support MCS 32
}
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: PBSS_HT pBssHT //to be initialized
* output: none
* return: none
* notice: This function is called when initialize network structure
-********************************************************************************************************************/
+ *******************************************************************************
+ */
void HTInitializeBssDesc(PBSS_HT pBssHT)
{
@@ -1159,14 +1170,15 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
pBssHT->bdRT2RTAggregation = false;
pBssHT->bdRT2RTLongSlotTime = false;
}
-/********************************************************************************************************************
+/*******************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
* struct ieee80211_network *pNetwork //usually current network we are live in
* output: none
* return: none
* notice: This function should ONLY be called before association
-********************************************************************************************************************/
+ *******************************************************************************
+ */
void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1264,14 +1276,15 @@ void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_
}
EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
-/********************************************************************************************************************
+/*******************************************************************************
*function: check whether HT control field exists
* input: struct ieee80211_device *ieee
* u8* pFrame //coming skb->data
* output: none
* return: return true if HT control field exists(false otherwise)
* notice:
-********************************************************************************************************************/
+ *******************************************************************************
+ */
u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
{
if (ieee->pHTInfo->bCurrentHTSupport) {
--
2.16.3
Powered by blists - more mailing lists