[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5a449fc0-4d3e-c7c7-0e9a-43efb4b909cf@pengutronix.de>
Date: Mon, 14 May 2018 10:37:21 +0200
From: Bastian Stender <bst@...gutronix.de>
To: Anson Huang <Anson.Huang@....com>, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de,
fabio.estevam@....com, robh+dt@...nel.org, mark.rutland@....com,
rjw@...ysocki.net, viresh.kumar@...aro.org, rui.zhang@...el.com,
edubezval@...il.com
Cc: devicetree@...r.kernel.org, linux-pm@...r.kernel.org,
Linux-imx@....com, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] thermal: imx: remove cpufreq cooling registration
Hi,
On 05/14/2018 10:09 AM, Anson Huang wrote:
> This patch removes cpufreq cooling registration in
> thermal .probe function, cpufreq cooling should be
> done in cpufreq driver when it is ready.
>
> Signed-off-by: Anson Huang <Anson.Huang@....com>
It seems you are trying to achieve something similar to a patch I sent a
couple of month ago. Unfortunately I did not have the time to rework it yet:
https://patchwork.kernel.org/patch/10059085/
Some of the comments might apply here too.
Regards,
Bastian
> ---
> drivers/thermal/imx_thermal.c | 16 ----------------
> 1 file changed, 16 deletions(-)
>
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index c30dc21..8eedb97 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -9,7 +9,6 @@
>
> #include <linux/clk.h>
> #include <linux/cpufreq.h>
> -#include <linux/cpu_cooling.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/init.h>
> @@ -207,7 +206,6 @@ static struct thermal_soc_data thermal_imx7d_data = {
> struct imx_thermal_data {
> struct cpufreq_policy *policy;
> struct thermal_zone_device *tz;
> - struct thermal_cooling_device *cdev;
> enum thermal_device_mode mode;
> struct regmap *tempmon;
> u32 c1, c2; /* See formula in imx_init_calib() */
> @@ -729,22 +727,12 @@ static int imx_thermal_probe(struct platform_device *pdev)
> return -EPROBE_DEFER;
> }
>
> - data->cdev = cpufreq_cooling_register(data->policy);
> - if (IS_ERR(data->cdev)) {
> - ret = PTR_ERR(data->cdev);
> - dev_err(&pdev->dev,
> - "failed to register cpufreq cooling device: %d\n", ret);
> - cpufreq_cpu_put(data->policy);
> - return ret;
> - }
> -
> data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
> if (IS_ERR(data->thermal_clk)) {
> ret = PTR_ERR(data->thermal_clk);
> if (ret != -EPROBE_DEFER)
> dev_err(&pdev->dev,
> "failed to get thermal clk: %d\n", ret);
> - cpufreq_cooling_unregister(data->cdev);
> cpufreq_cpu_put(data->policy);
> return ret;
> }
> @@ -759,7 +747,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
> ret = clk_prepare_enable(data->thermal_clk);
> if (ret) {
> dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
> - cpufreq_cooling_unregister(data->cdev);
> cpufreq_cpu_put(data->policy);
> return ret;
> }
> @@ -775,7 +762,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
> dev_err(&pdev->dev,
> "failed to register thermal zone device %d\n", ret);
> clk_disable_unprepare(data->thermal_clk);
> - cpufreq_cooling_unregister(data->cdev);
> cpufreq_cpu_put(data->policy);
> return ret;
> }
> @@ -811,7 +797,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
> dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
> clk_disable_unprepare(data->thermal_clk);
> thermal_zone_device_unregister(data->tz);
> - cpufreq_cooling_unregister(data->cdev);
> cpufreq_cpu_put(data->policy);
> return ret;
> }
> @@ -831,7 +816,6 @@ static int imx_thermal_remove(struct platform_device *pdev)
> clk_disable_unprepare(data->thermal_clk);
>
> thermal_zone_device_unregister(data->tz);
> - cpufreq_cooling_unregister(data->cdev);
> cpufreq_cpu_put(data->policy);
>
> return 0;
>
--
Pengutronix e.K.
Industrial Linux Solutions
http://www.pengutronix.de/
Peiner Str. 6-8, 31137 Hildesheim, Germany
Amtsgericht Hildesheim, HRA 2686
Powered by blists - more mailing lists