lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1526303520-5843-6-git-send-email-ilialin@codeaurora.org>
Date:   Mon, 14 May 2018 16:11:51 +0300
From:   Ilia Lin <ilialin@...eaurora.org>
To:     mturquette@...libre.com, sboyd@...nel.org, robh@...nel.org,
        mark.rutland@....com, viresh.kumar@...aro.org, nm@...com,
        lgirdwood@...il.com, broonie@...nel.org, andy.gross@...aro.org,
        david.brown@...aro.org, catalin.marinas@....com,
        will.deacon@....com, rjw@...ysocki.net, linux-clk@...r.kernel.org
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-pm@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-soc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        rnayak@...eaurora.org, ilialin@...eaurora.org,
        amit.kucheria@...aro.org, nicolas.dechesne@...aro.org,
        celster@...eaurora.org, tfinkel@...eaurora.org
Subject: [PATCH v6 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL

From: Rajendra Nayak <rnayak@...eaurora.org>

Each of the CPU clusters on msm8996 are powered via a primary
PLL and a secondary PLL. The primary PLL is what drives the
CPU clk, except for times when we are reprogramming the PLL
itself, when we temporarily switch to an alternate PLL.
Use clock rate change notifiers to support this.

Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
Signed-off-by: Ilia Lin <ilialin@...eaurora.org>
---
 drivers/clk/qcom/clk-cpu-8996.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index beb97eb..390b369 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -61,6 +61,7 @@
  * detect voltage droops. We do not add support for ACD as yet.
  */
 
+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -187,10 +188,14 @@ struct clk_cpu_8996_mux {
 	u32	reg;
 	u8	shift;
 	u8	width;
+	struct notifier_block nb;
 	struct clk_hw	*pll;
 	struct clk_regmap clkr;
 };
 
+#define to_clk_cpu_8996_mux_nb(_nb) \
+	container_of(_nb, struct clk_cpu_8996_mux, nb)
+
 static inline
 struct clk_cpu_8996_mux *to_clk_cpu_8996_mux_hw(struct clk_hw *hw)
 {
@@ -236,6 +241,26 @@ static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index)
 	return 0;
 }
 
+int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
+			void *data)
+{
+	int ret;
+	struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_nb(nb);
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, ALT_INDEX);
+		break;
+	case POST_RATE_CHANGE:
+		ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, PLL_INDEX);
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+
+	return notifier_from_errno(ret);
+};
 const struct clk_ops clk_cpu_8996_mux_ops = {
 	.set_parent = clk_cpu_8996_mux_set_parent,
 	.get_parent = clk_cpu_8996_mux_get_parent,
@@ -279,6 +304,7 @@ static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index)
 	.shift = 0,
 	.width = 2,
 	.pll = &pwrcl_pll.clkr.hw,
+	.nb.notifier_call = cpu_clk_notifier_cb,
 	.clkr.hw.init = &(struct clk_init_data) {
 		.name = "pwrcl_pmux",
 		.parent_names = (const char *[]){
@@ -298,6 +324,7 @@ static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index)
 	.shift = 0,
 	.width = 2,
 	.pll = &perfcl_pll.clkr.hw,
+	.nb.notifier_call = cpu_clk_notifier_cb,
 	.clkr.hw.init = &(struct clk_init_data) {
 		.name = "perfcl_pmux",
 		.parent_names = (const char *[]){
@@ -356,6 +383,12 @@ struct clk_regmap *clks[] = {
 	clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
 	clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
 
+	ret = clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
+	if (ret)
+		return ret;
+
+	ret = clk_notifier_register(perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb);
+
 	return ret;
 }
 
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ