lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180516074333.i2672u435ymwffk3@verge.net.au>
Date:   Wed, 16 May 2018 09:43:34 +0200
From:   Simon Horman <horms@...ge.net.au>
To:     Geert Uytterhoeven <geert@...ux-m68k.org>
Cc:     Gilad Ben-Yossef <gilad@...yossef.com>,
        Magnus Damm <magnus.damm@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Herbert Xu <herbert@...dor.apana.org.au>,
        "David S. Miller" <davem@...emloft.net>,
        Ofir Drang <ofir.drang@....com>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-clk <linux-clk@...r.kernel.org>,
        Linux Crypto Mailing List <linux-crypto@...r.kernel.org>
Subject: Re: [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding

On Tue, May 15, 2018 at 04:50:44PM +0200, Geert Uytterhoeven wrote:
> Hi Gilad,
> 
> On Tue, May 15, 2018 at 2:29 PM, Gilad Ben-Yossef <gilad@...yossef.com> wrote:
> > Add bindings for CryptoCell instance in the SoC.
> >
> > Signed-off-by: Gilad Ben-Yossef <gilad@...yossef.com>
> 
> Thanks for your patch!
> 
> > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > @@ -528,6 +528,14 @@
> >                         status = "disabled";
> >                 };
> >
> > +               arm_cc630p: crypto@...01000 {
> > +                       compatible = "arm,cryptocell-630p-ree";
> > +                       interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> > +                       #interrupt-cells = <2>;
> 
> I believe the #interrupt-cells property is not needed.
> 
> > +                       reg = <0x0 0xe6601000 0 0x1000>;
> > +                       clocks = <&cpg CPG_MOD 229>;
> > +               };
> 
> The rest looks good, but I cannot verify the register block.
> 
> > +
> >                 i2c3: i2c@...d0000 {
> >                         #address-cells = <1>;
> >                         #size-cells = <0>;

Thanks, I have applied this after dropping the #interrupt-cells property.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ