[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180516080635.GE5130@dell>
Date: Wed, 16 May 2018 09:06:35 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Fabrice Gasnier <fabrice.gasnier@...com>
Cc: alexandre.torgue@...com, thierry.reding@...il.com,
benjamin.gaignard@...aro.org, robh+dt@...nel.org,
mark.rutland@....com, linux@...linux.org.uk,
mcoquelin.stm32@...il.com, benjamin.gaignard@...com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pwm@...r.kernel.org
Subject: Re: [RESEND PATCH v5 0/6] Add support for PWM input capture on STM32
On Wed, 16 May 2018, Fabrice Gasnier wrote:
> This series adds support for capture to stm32-pwm driver.
> Capture is based on DMAs.
> - First two patches add support for requesting DMAs to MFD core
> - Next three patches add support for capture to stm32-pwm driver
> - This has been tested on stm32429i-eval board.
>
> ---
> Changes in v5:
> - update patch 2 (mfd: stm32-timers: add support for dmas)
> move stm32_timers_dma struct to header file,
> fix warning on dma_mapping_error().
>
> Changes in v4:
> - Lee's comments on patch 2 (mfd: stm32-timers: add support for dmas)
> Add kerneldoc header, better format comments.
>
> Changes in v3:
> - Dropped 2 precusor patches applied by Thierry in pwm tree:
> "pwm: stm32: fix, remove unused struct device"
> "pwm: stm32: protect common prescaler for all channels"
> - Note: this series applies on top on pwm tree
> - Implements Lee's comments on MFD part: rework stm32_timers_dma struct,
> exported routine prototype now use generic device struct, more
> various comments (see patch 2 changelog).
>
> Resend v2:
> - Add collected Acks
>
> Changes in v2:
> - Abstract DMA handling from child driver: move it to MFD core
> - Rework pwm capture routines to adopt this change
> - Comment on optional dma support, beautify DMAs probe
>
> Fabrice Gasnier (6):
> dt-bindings: mfd: stm32-timers: add support for dmas
> mfd: stm32-timers: add support for dmas
> pwm: stm32: add capture support
> pwm: stm32: improve capture by tuning counter prescaler
> pwm: stm32: use input prescaler to improve period capture
> ARM: dts: stm32: Enable pwm3 input capture on stm32f429i-eval
Applied patches 1-5.
> .../devicetree/bindings/mfd/stm32-timers.txt | 20 ++
> arch/arm/boot/dts/stm32429i-eval.dts | 3 +
> drivers/mfd/stm32-timers.c | 201 +++++++++++++++-
> drivers/pwm/pwm-stm32.c | 257 +++++++++++++++++++++
> include/linux/mfd/stm32-timers.h | 58 +++++
> 5 files changed, 537 insertions(+), 2 deletions(-)
>
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists