linux-kernel - Applied "regulator: pfuze100: add enable/disable for switch" to the regulator tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20180517171304.CE03944007C@finisterre.ee.mobilebroadband>
Date:   Thu, 17 May 2018 18:13:04 +0100 (BST)
From:   Mark Brown <broonie@...nel.org>
To:     Anson Huang <Anson.Huang@....com>
Cc:     Mark Brown <broonie@...nel.org>, lgirdwood@...il.com,
        broonie@...nel.org, Linux-imx@....com,
        linux-kernel@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Applied "regulator: pfuze100: add enable/disable for switch" to the regulator tree

The patch

   regulator: pfuze100: add enable/disable for switch

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 5fe156f1cab4f340ddb6283c993912be77594016 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@....com>
Date: Thu, 17 May 2018 15:27:21 +0800
Subject: [PATCH] regulator: pfuze100: add enable/disable for switch

Add enable/disable support for switch regulator on pfuze100.

Based on Robin Gong's patch from the NXP kernel tree.

Signed-off-by: Anson Huang <Anson.Huang@....com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 drivers/regulator/pfuze100-regulator.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 680f076e3d85..053eb1ecf18d 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -155,6 +155,9 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
 };
 
 static const struct regulator_ops pfuze100_sw_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -200,6 +203,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
 			.uV_step = (step),	\
 			.vsel_reg = (base) + PFUZE100_VOL_OFFSET,	\
 			.vsel_mask = 0x3f,	\
+			.enable_reg = (base) + PFUZE100_MODE_OFFSET,	\
+			.enable_val = 0xc,	\
+			.disable_val = 0x0,	\
+			.enable_mask = 0xf,	\
+			.enable_time = 500,	\
 		},	\
 		.stby_reg = (base) + PFUZE100_STANDBY_OFFSET,	\
 		.stby_mask = 0x3f,	\
-- 
2.17.0