[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180517055014.6607-7-o.rempel@pengutronix.de>
Date: Thu, 17 May 2018 07:50:14 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Shawn Guo <shawnguo@...nel.org>, Mark Brown <broonie@...nel.org>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
Liam Girdwood <lgirdwood@...il.com>,
Leonard Crestez <leonard.crestez@....com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Fabio Estevam <fabio.estevam@....com>,
Russell King <linux@...linux.org.uk>
Subject: [PATCH v7 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option
This board, as well as some other boards with i.MX6 and a PMIC, uses a
"PMIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2e98c92adff7..a0e9753ee767 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
status = "okay";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -170,6 +174,7 @@
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <16 8>;
+ fsl,pmic-stby-poweroff;
regulators {
reg_vddcore: sw1ab { /* VDDARM_IN */
--
2.17.0
Powered by blists - more mailing lists