| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180517203331.24504-5-alexandre.belloni@bootlin.com>
Date: Thu, 17 May 2018 22:33:29 +0200
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: linux-rtc@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH 5/7] rtc: rx8581: remove useless declaration
The rx8581_driver forward declaration is useless, remove it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
drivers/rtc/rtc-rx8581.c | 33 +++++++++++++++------------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
index a91fbb86a110..0a70f1ac5cc2 100644
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@@ -59,8 +59,6 @@ struct rx8581 {
u8 length, const u8 *values);
};
-static struct i2c_driver rx8581_driver;
-
static int rx8581_read_block_data(const struct i2c_client *client, u8 command,
u8 length, u8 *values)
{
@@ -107,7 +105,7 @@ static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
*/
data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
if (data < 0) {
- dev_err(&client->dev, "Unable to read device flags\n");
+ dev_err(dev, "Unable to read device flags\n");
return -EIO;
}
@@ -117,7 +115,7 @@ static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
err = i2c_smbus_write_byte_data(client,
RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF));
if (err != 0) {
- dev_err(&client->dev, "Unable to write device flags\n");
+ dev_err(dev, "Unable to write device flags\n");
return -EIO;
}
}
@@ -126,24 +124,23 @@ static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
err = rx8581->read_block_data(client, RX8581_REG_SC,
7, date);
if (err < 0) {
- dev_err(&client->dev, "Unable to read date\n");
+ dev_err(dev, "Unable to read date\n");
return -EIO;
}
/* Check flag register */
data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
if (data < 0) {
- dev_err(&client->dev, "Unable to read device flags\n");
+ dev_err(dev, "Unable to read device flags\n");
return -EIO;
}
} while (data & RX8581_FLAG_UF);
if (data & RX8581_FLAG_VLF)
- dev_info(&client->dev,
+ dev_info(dev,
"low voltage detected, date/time is not reliable.\n");
- dev_dbg(&client->dev,
- "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
+ dev_dbg(dev, "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
"wday=%02x, mday=%02x, mon=%02x, year=%02x\n",
__func__,
date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
@@ -156,7 +153,7 @@ static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm)
tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
tm->tm_year = bcd2bin(date[RX8581_REG_YR]) + 100;
- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
@@ -172,7 +169,7 @@ static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
unsigned char buf[7];
struct rx8581 *rx8581 = i2c_get_clientdata(client);
- dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
@@ -195,49 +192,49 @@ static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm)
/* Stop the clock */
data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
if (data < 0) {
- dev_err(&client->dev, "Unable to read control register\n");
+ dev_err(dev, "Unable to read control register\n");
return -EIO;
}
err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
(data | RX8581_CTRL_STOP));
if (err < 0) {
- dev_err(&client->dev, "Unable to write control register\n");
+ dev_err(dev, "Unable to write control register\n");
return -EIO;
}
/* write register's data */
err = rx8581->write_block_data(client, RX8581_REG_SC, 7, buf);
if (err < 0) {
- dev_err(&client->dev, "Unable to write to date registers\n");
+ dev_err(dev, "Unable to write to date registers\n");
return -EIO;
}
/* get VLF and clear it */
data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
if (data < 0) {
- dev_err(&client->dev, "Unable to read flag register\n");
+ dev_err(dev, "Unable to read flag register\n");
return -EIO;
}
err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
(data & ~(RX8581_FLAG_VLF)));
if (err != 0) {
- dev_err(&client->dev, "Unable to write flag register\n");
+ dev_err(dev, "Unable to write flag register\n");
return -EIO;
}
/* Restart the clock */
data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
if (data < 0) {
- dev_err(&client->dev, "Unable to read control register\n");
+ dev_err(dev, "Unable to read control register\n");
return -EIO;
}
err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
(data & ~(RX8581_CTRL_STOP)));
if (err != 0) {
- dev_err(&client->dev, "Unable to write control register\n");
+ dev_err(dev, "Unable to write control register\n");
return -EIO;
}
--
2.17.0
Powered by blists - more mailing lists