[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1526681037-2074-3-git-send-email-scott.branden@broadcom.com>
Date: Fri, 18 May 2018 15:03:56 -0700
From: Scott Branden <scott.branden@...adcom.com>
To: Adrian Hunter <adrian.hunter@...el.com>,
Ulf Hansson <ulf.hansson@...aro.org>
Cc: BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
linux-mmc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Corneliu Doban <corneliu.doban@...adcom.com>,
Scott Branden <scott.branden@...adcom.com>
Subject: [PATCH 2/3] mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
From: Corneliu Doban <corneliu.doban@...adcom.com>
When the host controller accepts only 32bit writes, the value of the
16bit TRANSFER_MODE register, that has the same 32bit address as the
16bit COMMAND register, needs to be saved and it will be written
in a 32bit write together with the command as this will trigger the
host to send the command on the SD interface.
When sending the tuning command, TRANSFER_MODE is written and then
sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and
write it again resulting in wrong value to be written because the
initial write value was saved in a shadow and the read-back returned
a wrong value, from the register.
Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE
when a saved value exist.
Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are
saved for a different reason, although a scenario that will cause the
mentioned problem on this registers is not probable.
Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Corneliu Doban <corneliu.doban@...adcom.com>
Signed-off-by: Scott Branden <scott.branden@...adcom.com>
---
drivers/mmc/host/sdhci-iproc.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index 6f430da..1f0ab08 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -33,6 +33,8 @@ struct sdhci_iproc_host {
const struct sdhci_iproc_data *data;
u32 shadow_cmd;
u32 shadow_blk;
+ bool is_cmd_shadowed;
+ bool is_blk_shadowed;
};
#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
@@ -48,8 +50,22 @@ static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg)
static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
{
- u32 val = sdhci_iproc_readl(host, (reg & ~3));
- u16 word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
+ u32 val;
+ u16 word;
+
+ if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) {
+ /* Get the saved transfer mode */
+ val = iproc_host->shadow_cmd;
+ } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
+ iproc_host->is_blk_shadowed) {
+ /* Get the saved block info */
+ val = iproc_host->shadow_blk;
+ } else {
+ val = sdhci_iproc_readl(host, (reg & ~3));
+ }
+ word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
return word;
}
@@ -105,13 +121,15 @@ static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
if (reg == SDHCI_COMMAND) {
/* Write the block now as we are issuing a command */
- if (iproc_host->shadow_blk != 0) {
+ if (iproc_host->is_blk_shadowed) {
sdhci_iproc_writel(host, iproc_host->shadow_blk,
SDHCI_BLOCK_SIZE);
- iproc_host->shadow_blk = 0;
+ iproc_host->is_blk_shadowed = false;
}
oldval = iproc_host->shadow_cmd;
- } else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
+ iproc_host->is_cmd_shadowed = false;
+ } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
+ iproc_host->is_blk_shadowed) {
/* Block size and count are stored in shadow reg */
oldval = iproc_host->shadow_blk;
} else {
@@ -123,9 +141,11 @@ static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
if (reg == SDHCI_TRANSFER_MODE) {
/* Save the transfer mode until the command is issued */
iproc_host->shadow_cmd = newval;
+ iproc_host->is_cmd_shadowed = true;
} else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
/* Save the block info until the command is issued */
iproc_host->shadow_blk = newval;
+ iproc_host->is_blk_shadowed = true;
} else {
/* Command or other regular 32-bit write */
sdhci_iproc_writel(host, newval, reg & ~3);
--
2.5.0
Powered by blists - more mailing lists