linux-kernel - Re: [PATCH v3 2/6] mfd: at91-usart: added mfd driver for usart

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180518221949.GA13443@rob-hp-laptop>
Date:   Fri, 18 May 2018 17:19:49 -0500
From:   Rob Herring <robh@...nel.org>
To:     Radu Pirea <radu.pirea@...rochip.com>
Cc:     devicetree@...r.kernel.org, linux-serial@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-spi@...r.kernel.org, mark.rutland@....com,
        lee.jones@...aro.org, gregkh@...uxfoundation.org, jslaby@...e.com,
        richard.genoud@...il.com, alexandre.belloni@...tlin.com,
        nicolas.ferre@...rochip.com, broonie@...nel.org
Subject: Re: [PATCH v3 2/6] mfd: at91-usart: added mfd driver for usart

On Fri, May 11, 2018 at 01:38:18PM +0300, Radu Pirea wrote:
> This mfd driver is just a wrapper over atmel_serial driver and
> spi-at91-usart driver. Selection of one of the drivers is based on a
> property from device tree. If the property is not specified, the default
> driver is atmel_serial.
> 
> Signed-off-by: Radu Pirea <radu.pirea@...rochip.com>
> ---
>  drivers/mfd/Kconfig                  | 10 ++++
>  drivers/mfd/Makefile                 |  1 +
>  drivers/mfd/at91-usart.c             | 75 ++++++++++++++++++++++++++++
>  include/dt-bindings/mfd/at91-usart.h | 17 +++++++
>  4 files changed, 103 insertions(+)
>  create mode 100644 drivers/mfd/at91-usart.c
>  create mode 100644 include/dt-bindings/mfd/at91-usart.h
> 

> +#ifndef __DT_BINDINGS_AT91_USART_H__
> +#define __DT_BINDINGS_AT91_USART_H__
> +
> +#define AT91_USART_MODE_SERIAL	1
> +#define AT91_USART_MODE_SPI	2

Won't this require a DT update for serial mode to add the mode property? 
That breaks compatibility.

Rob