[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180518094536.17201-21-jagan@amarulasolutions.com>
Date: Fri, 18 May 2018 15:15:30 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>, Icenowy Zheng <icenowy@...c.io>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
Michael Trimarchi <michael@...rulasolutions.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Cc: Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH v2 20/26] drm: sun4i: add support for HVCC regulator for DWC HDMI glue
From: Icenowy Zheng <icenowy@...c.io>
Allwinner SoCs with DWC HDMI controller have a "HVCC" power pin for the
HDMI part, and on some boards it's connected to a dedicated regulator
rather than the main 3.3v.
Add support for optional HVCC regulator. For boards that doesn't use a
dedicated regulator to power it, the default dummy regulator is used.
Signed-off-by: Icenowy Zheng <icenowy@...c.io>
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
Changes for v2:
- none
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 14 ++++++++++++++
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 ++
2 files changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index 9f40a44b456b..7c33faff7ad4 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -73,6 +73,12 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
if (encoder->possible_crtcs == 0)
return -EPROBE_DEFER;
+ hdmi->vcc_hdmi = devm_regulator_get(dev, "hvcc");
+ if (IS_ERR(hdmi->vcc_hdmi)) {
+ dev_err(dev, "Could not get HDMI power supply\n");
+ return PTR_ERR(hdmi->vcc_hdmi);
+ }
+
hdmi->rst_ctrl = devm_reset_control_get(dev, "ctrl");
if (IS_ERR(hdmi->rst_ctrl)) {
dev_err(dev, "Could not get ctrl reset control\n");
@@ -91,6 +97,12 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
return ret;
}
+ ret = regulator_enable(hdmi->vcc_hdmi);
+ if (ret) {
+ dev_err(dev, "Cannot enable HDMI power supply\n");
+ goto err_disable_vcc;
+ }
+
ret = clk_prepare_enable(hdmi->clk_tmds);
if (ret) {
dev_err(dev, "Could not enable tmds clock\n");
@@ -143,6 +155,8 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
clk_disable_unprepare(hdmi->clk_tmds);
err_assert_ctrl_reset:
reset_control_assert(hdmi->rst_ctrl);
+err_disable_vcc:
+ regulator_disable(hdmi->vcc_hdmi);
return ret;
}
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 303189d6602c..65366eeb38d8 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -10,6 +10,7 @@
#include <drm/drm_encoder.h>
#include <linux/clk.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#define SUN8I_HDMI_PHY_DBG_CTRL_REG 0x0000
@@ -175,6 +176,7 @@ struct sun8i_dw_hdmi {
struct drm_encoder encoder;
struct sun8i_hdmi_phy *phy;
struct dw_hdmi_plat_data plat_data;
+ struct regulator *vcc_hdmi;
struct reset_control *rst_ctrl;
};
--
2.14.3
Powered by blists - more mailing lists