lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180518123451.31365-1-antoine.tenart@bootlin.com>
Date:   Fri, 18 May 2018 14:34:51 +0200
From:   Antoine Tenart <antoine.tenart@...tlin.com>
To:     davem@...emloft.net
Cc:     Antoine Tenart <antoine.tenart@...tlin.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        thomas.petazzoni@...tlin.com, maxime.chevallier@...tlin.com,
        gregory.clement@...tlin.com, miquel.raynal@...tlin.com,
        nadavh@...vell.com, stefanc@...vell.com, ymarkman@...vell.com,
        mw@...ihalf.com
Subject: [PATCH] net: mvpp2: typo and cosmetic fixes

This patch on the Marvell PPv2 driver is only cosmetic. Two typos are
removed as well as other cosmetic fixes, such as extra new lines or tabs
vs spaces.

Suggested-by: Stefan Chulski <stefanc@...vell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@...tlin.com>
---
 drivers/net/ethernet/marvell/mvpp2.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index f8ed983bc767..7f54bb0334f1 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -1757,7 +1757,6 @@ static void mvpp2_prs_tcam_ai_update(struct mvpp2_prs_entry *pe,
 	int i, ai_idx = MVPP2_PRS_TCAM_AI_BYTE;
 
 	for (i = 0; i < MVPP2_PRS_AI_BITS; i++) {
-
 		if (!(enable & BIT(i)))
 			continue;
 
@@ -1841,7 +1840,6 @@ static void mvpp2_prs_sram_ai_update(struct mvpp2_prs_entry *pe,
 	int ai_off = MVPP2_PRS_SRAM_AI_OFFS;
 
 	for (i = 0; i < MVPP2_PRS_SRAM_AI_CTRL_BITS; i++) {
-
 		if (!(mask & BIT(i)))
 			continue;
 
@@ -4937,7 +4935,7 @@ static void mvpp22_gop_mask_irq(struct mvpp2_port *port)
 	if (port->gop_id == 0) {
 		val = readl(port->base + MVPP22_XLG_EXT_INT_MASK);
 		val &= ~(MVPP22_XLG_EXT_INT_MASK_XLG |
-		         MVPP22_XLG_EXT_INT_MASK_GIG);
+			 MVPP22_XLG_EXT_INT_MASK_GIG);
 		writel(val, port->base + MVPP22_XLG_EXT_INT_MASK);
 	}
 
@@ -5471,7 +5469,6 @@ static void mvpp2_aggr_txq_pend_desc_add(struct mvpp2_port *port, int pending)
 			   MVPP2_AGGR_TXQ_UPDATE_REG, pending);
 }
 
-
 /* Check if there are enough free descriptors in aggregated txq.
  * If not, update the number of occupied descriptors and repeat the check.
  *
@@ -5551,7 +5548,7 @@ static int mvpp2_txq_reserved_desc_num_proc(struct mvpp2 *priv,
 
 	txq_pcpu->reserved_num += mvpp2_txq_alloc_reserved_desc(priv, txq, req);
 
-	/* OK, the descriptor cound has been updated: check again. */
+	/* OK, the descriptor could have been updated: check again. */
 	if (txq_pcpu->reserved_num < num)
 		return -ENOMEM;
 	return 0;
@@ -6033,7 +6030,7 @@ static int mvpp2_txq_init(struct mvpp2_port *port,
 	/* Calculate base address in prefetch buffer. We reserve 16 descriptors
 	 * for each existing TXQ.
 	 * TCONTS for PON port must be continuous from 0 to MVPP2_MAX_TCONT
-	 * GBE ports assumed to be continious from 0 to MVPP2_MAX_PORTS
+	 * GBE ports assumed to be continuous from 0 to MVPP2_MAX_PORTS
 	 */
 	desc_per_txq = 16;
 	desc = (port->id * MVPP2_MAX_TXQ * desc_per_txq) +
@@ -6603,8 +6600,7 @@ static int mvpp2_tx_frag_process(struct mvpp2_port *port, struct sk_buff *skb,
 		mvpp2_txdesc_size_set(port, tx_desc, frag->size);
 
 		buf_dma_addr = dma_map_single(port->dev->dev.parent, addr,
-					       frag->size,
-					       DMA_TO_DEVICE);
+					      frag->size, DMA_TO_DEVICE);
 		if (dma_mapping_error(port->dev->dev.parent, buf_dma_addr)) {
 			mvpp2_txq_desc_put(txq);
 			goto cleanup;
-- 
2.17.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ