linux-kernel - [PATCH 4.16 001/110] xhci: Fix USB3 NULL pointer dereference at logical disconnect.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180521210503.936834693@linuxfoundation.org>
Date:   Mon, 21 May 2018 23:10:58 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Jordan Glover <Golden_Miller83@...tonmail.ch>,
        Mathias Nyman <mathias.nyman@...ux.intel.com>
Subject: [PATCH 4.16 001/110] xhci: Fix USB3 NULL pointer dereference at logical disconnect.

4.16-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@...ux.intel.com>

commit 2278446e2b7cd33ad894b32e7eb63afc7db6c86e upstream.

Hub driver will try to disable a USB3 device twice at logical disconnect,
racing with xhci_free_dev() callback from the first port disable.

This can be triggered with "udisksctl power-off --block-device <disk>"
or by writing "1" to the "remove" sysfs file for a USB3 device
in 4.17-rc4.

USB3 devices don't have a similar disabled link state as USB2 devices,
and use a U3 suspended link state instead. In this state the port
is still enabled and connected.

hub_port_connect() first disconnects the device, then later it notices
that device is still enabled (due to U3 states) it will try to disable
the port again (set to U3).

The xhci_free_dev() called during device disable is async, so checking
for existing xhci->devs[i] when setting link state to U3 the second time
was successful, even if device was being freed.

The regression was caused by, and whole thing revealed by,
Commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned.
and causes a NULL pointer dereference the second time we try to set U3.

Fix this by checking xhci->devs[i]->udev exists before setting link state.

The original patch went to stable so this fix needs to be applied there as
well.

Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: <stable@...r.kernel.org>
Reported-by: Jordan Glover <Golden_Miller83@...tonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@...tonmail.ch>
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/host/xhci-hub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -354,7 +354,7 @@ int xhci_find_slot_id_by_port(struct usb

 	slot_id = 0;
 	for (i = 0; i < MAX_HC_SLOTS; i++) {
-		if (!xhci->devs[i])
+		if (!xhci->devs[i] || !xhci->devs[i]->udev)
 			continue;
 		speed = xhci->devs[i]->udev->speed;
 		if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))