| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1fKn3t-0007PF-KN@debutante>
Date: Mon, 21 May 2018 16:49:25 +0100
From: Mark Brown <broonie@...nel.org>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: Mark Brown <broonie@...nel.org>, broonie@...nel.org,
linux-arm-msm@...r.kernel.org, alsa-devel@...a-project.org,
bgoswami@...eaurora.org, mark.rutland@....com,
devicetree@...r.kernel.org, rohkumar@....qualcomm.com,
gregkh@...uxfoundation.org, plai@...eaurora.org,
lgirdwood@...il.com, tiwai@...e.com, david.brown@...aro.org,
robh+dt@...nel.org, linux-arm-kernel@...ts.infradead.org,
spatakok@....qualcomm.com, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org
Subject: Applied "ASoC: qdsp6: q6afe: Add support to MI2S ports" to the asoc tree
The patch
ASoC: qdsp6: q6afe: Add support to MI2S ports
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From d3839145722bae49e3a02d65f64ce49c75d7c8e1 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Date: Fri, 18 May 2018 13:55:58 +0100
Subject: [PATCH] ASoC: qdsp6: q6afe: Add support to MI2S ports
This patch adds support to 4 MI2S ports on LPASS.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@...eaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@...eaurora.org>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
sound/soc/qcom/qdsp6/q6afe.c | 224 +++++++++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6afe.h | 13 ++
2 files changed, 237 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index 735c0b5eb55a..0004369b3661 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -15,6 +15,10 @@
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/soc/qcom/apr.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
#include "q6dsp-errno.h"
#include "q6core.h"
#include "q6afe.h"
@@ -31,6 +35,32 @@
#define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235
#define AFE_PARAM_ID_SLIMBUS_CONFIG 0x00010212
+#define AFE_PARAM_ID_I2S_CONFIG 0x0001020D
+
+/* I2S config specific */
+#define AFE_API_VERSION_I2S_CONFIG 0x1
+#define AFE_PORT_I2S_SD0 0x1
+#define AFE_PORT_I2S_SD1 0x2
+#define AFE_PORT_I2S_SD2 0x3
+#define AFE_PORT_I2S_SD3 0x4
+#define AFE_PORT_I2S_SD0_MASK BIT(0x1)
+#define AFE_PORT_I2S_SD1_MASK BIT(0x2)
+#define AFE_PORT_I2S_SD2_MASK BIT(0x3)
+#define AFE_PORT_I2S_SD3_MASK BIT(0x4)
+#define AFE_PORT_I2S_SD0_1_MASK GENMASK(2, 1)
+#define AFE_PORT_I2S_SD2_3_MASK GENMASK(4, 3)
+#define AFE_PORT_I2S_SD0_1_2_MASK GENMASK(3, 1)
+#define AFE_PORT_I2S_SD0_1_2_3_MASK GENMASK(4, 1)
+#define AFE_PORT_I2S_QUAD01 0x5
+#define AFE_PORT_I2S_QUAD23 0x6
+#define AFE_PORT_I2S_6CHS 0x7
+#define AFE_PORT_I2S_8CHS 0x8
+#define AFE_PORT_I2S_MONO 0x0
+#define AFE_PORT_I2S_STEREO 0x1
+#define AFE_PORT_CONFIG_I2S_WS_SRC_EXTERNAL 0x0
+#define AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL 0x1
+#define AFE_LINEAR_PCM_DATA 0x0
+
/* Port IDs */
#define AFE_API_VERSION_HDMI_CONFIG 0x1
@@ -66,6 +96,19 @@
#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX 0x400c
/* SLIMbus Tx port on channel 6. */
#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX 0x400d
+#define AFE_PORT_ID_PRIMARY_MI2S_RX 0x1000
+#define AFE_PORT_ID_PRIMARY_MI2S_TX 0x1001
+#define AFE_PORT_ID_SECONDARY_MI2S_RX 0x1002
+#define AFE_PORT_ID_SECONDARY_MI2S_TX 0x1003
+#define AFE_PORT_ID_TERTIARY_MI2S_RX 0x1004
+#define AFE_PORT_ID_TERTIARY_MI2S_TX 0x1005
+#define AFE_PORT_ID_QUATERNARY_MI2S_RX 0x1006
+#define AFE_PORT_ID_QUATERNARY_MI2S_TX 0x1007
+
+#define Q6AFE_LPASS_MODE_CLK1_VALID 1
+#define Q6AFE_LPASS_MODE_CLK2_VALID 2
+#define Q6AFE_LPASS_CLK_SRC_INTERNAL 1
+#define Q6AFE_LPASS_CLK_ROOT_DEFAULT 0
#define TIMEOUT_MS 1000
#define AFE_CMD_RESP_AVAIL 0
@@ -159,10 +202,21 @@ struct afe_param_id_slimbus_cfg {
*/
} __packed;
+struct afe_param_id_i2s_cfg {
+ u32 i2s_cfg_minor_version;
+ u16 bit_width;
+ u16 channel_mode;
+ u16 mono_stereo;
+ u16 ws_src;
+ u32 sample_rate;
+ u16 data_format;
+ u16 reserved;
+} __packed;
union afe_port_config {
struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
struct afe_param_id_slimbus_cfg slim_cfg;
+ struct afe_param_id_i2s_cfg i2s_cfg;
} __packed;
struct q6afe_port {
@@ -206,6 +260,22 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
SLIMBUS_5_RX, 1, 1},
[SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX,
SLIMBUS_6_RX, 1, 1},
+ [PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX,
+ PRIMARY_MI2S_RX, 1, 1},
+ [PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX,
+ PRIMARY_MI2S_RX, 0, 1},
+ [SECONDARY_MI2S_RX] = { AFE_PORT_ID_SECONDARY_MI2S_RX,
+ SECONDARY_MI2S_RX, 1, 1},
+ [SECONDARY_MI2S_TX] = { AFE_PORT_ID_SECONDARY_MI2S_TX,
+ SECONDARY_MI2S_TX, 0, 1},
+ [TERTIARY_MI2S_RX] = { AFE_PORT_ID_TERTIARY_MI2S_RX,
+ TERTIARY_MI2S_RX, 1, 1},
+ [TERTIARY_MI2S_TX] = { AFE_PORT_ID_TERTIARY_MI2S_TX,
+ TERTIARY_MI2S_TX, 0, 1},
+ [QUATERNARY_MI2S_RX] = { AFE_PORT_ID_QUATERNARY_MI2S_RX,
+ QUATERNARY_MI2S_RX, 1, 1},
+ [QUATERNARY_MI2S_TX] = { AFE_PORT_ID_QUATERNARY_MI2S_TX,
+ QUATERNARY_MI2S_TX, 0, 1},
};
static void q6afe_port_free(struct kref *ref)
@@ -481,6 +551,149 @@ void q6afe_hdmi_port_prepare(struct q6afe_port *port,
}
EXPORT_SYMBOL_GPL(q6afe_hdmi_port_prepare);
+/**
+ * q6afe_i2s_port_prepare() - Prepare i2s afe port.
+ *
+ * @port: Instance of afe port
+ * @cfg: I2S configuration for the afe port
+ * Return: Will be an negative on error and zero on success.
+ */
+int q6afe_i2s_port_prepare(struct q6afe_port *port, struct q6afe_i2s_cfg *cfg)
+{
+ union afe_port_config *pcfg = &port->port_cfg;
+ struct device *dev = port->afe->dev;
+ int num_sd_lines;
+
+ pcfg->i2s_cfg.i2s_cfg_minor_version = AFE_API_VERSION_I2S_CONFIG;
+ pcfg->i2s_cfg.sample_rate = cfg->sample_rate;
+ pcfg->i2s_cfg.bit_width = cfg->bit_width;
+ pcfg->i2s_cfg.data_format = AFE_LINEAR_PCM_DATA;
+
+ switch (cfg->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ pcfg->i2s_cfg.ws_src = AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* CPU is slave */
+ pcfg->i2s_cfg.ws_src = AFE_PORT_CONFIG_I2S_WS_SRC_EXTERNAL;
+ break;
+ default:
+ break;
+ }
+
+ num_sd_lines = hweight_long(cfg->sd_line_mask);
+
+ switch (num_sd_lines) {
+ case 0:
+ dev_err(dev, "no line is assigned\n");
+ return -EINVAL;
+ case 1:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD0;
+ break;
+ case AFE_PORT_I2S_SD1_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD1;
+ break;
+ case AFE_PORT_I2S_SD2_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD2;
+ break;
+ case AFE_PORT_I2S_SD3_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD3;
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ case 2:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_1_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_QUAD01;
+ break;
+ case AFE_PORT_I2S_SD2_3_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_QUAD23;
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ case 3:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_1_2_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_6CHS;
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ case 4:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_1_2_3_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_8CHS;
+
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+
+ switch (cfg->num_channels) {
+ case 1:
+ case 2:
+ switch (pcfg->i2s_cfg.channel_mode) {
+ case AFE_PORT_I2S_QUAD01:
+ case AFE_PORT_I2S_6CHS:
+ case AFE_PORT_I2S_8CHS:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD0;
+ break;
+ case AFE_PORT_I2S_QUAD23:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD2;
+ break;
+ }
+
+ if (cfg->num_channels == 2)
+ pcfg->i2s_cfg.mono_stereo = AFE_PORT_I2S_STEREO;
+ else
+ pcfg->i2s_cfg.mono_stereo = AFE_PORT_I2S_MONO;
+
+ break;
+ case 3:
+ case 4:
+ if (pcfg->i2s_cfg.channel_mode < AFE_PORT_I2S_QUAD01) {
+ dev_err(dev, "Invalid Channel mode\n");
+ return -EINVAL;
+ }
+ break;
+ case 5:
+ case 6:
+ if (pcfg->i2s_cfg.channel_mode < AFE_PORT_I2S_6CHS) {
+ dev_err(dev, "Invalid Channel mode\n");
+ return -EINVAL;
+ }
+ break;
+ case 7:
+ case 8:
+ if (pcfg->i2s_cfg.channel_mode < AFE_PORT_I2S_8CHS) {
+ dev_err(dev, "Invalid Channel mode\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6afe_i2s_port_prepare);
+
/**
* q6afe_port_start() - Start a afe port
*
@@ -580,6 +793,17 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX:
cfg_type = AFE_PARAM_ID_SLIMBUS_CONFIG;
break;
+
+ case AFE_PORT_ID_PRIMARY_MI2S_RX:
+ case AFE_PORT_ID_PRIMARY_MI2S_TX:
+ case AFE_PORT_ID_SECONDARY_MI2S_RX:
+ case AFE_PORT_ID_SECONDARY_MI2S_TX:
+ case AFE_PORT_ID_TERTIARY_MI2S_RX:
+ case AFE_PORT_ID_TERTIARY_MI2S_TX:
+ case AFE_PORT_ID_QUATERNARY_MI2S_RX:
+ case AFE_PORT_ID_QUATERNARY_MI2S_TX:
+ cfg_type = AFE_PARAM_ID_I2S_CONFIG;
+ break;
default:
dev_err(dev, "Invalid port id 0x%x\n", port_id);
return ERR_PTR(-EINVAL);
diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h
index 5659966c6b1e..3cb3bb4985a9 100644
--- a/sound/soc/qcom/qdsp6/q6afe.h
+++ b/sound/soc/qcom/qdsp6/q6afe.h
@@ -11,6 +11,8 @@
#define MSM_AFE_PORT_TYPE_TX 1
#define AFE_MAX_PORTS AFE_PORT_MAX
+#define Q6AFE_MAX_MI2S_LINES 4
+
#define AFE_MAX_CHAN_COUNT 8
#define AFE_PORT_MAX_AUDIO_CHAN_CNT 0x8
@@ -29,9 +31,19 @@ struct q6afe_slim_cfg {
u8 ch_mapping[AFE_MAX_CHAN_COUNT];
};
+struct q6afe_i2s_cfg {
+ u32 sample_rate;
+ u16 bit_width;
+ u16 data_format;
+ u16 num_channels;
+ u32 sd_line_mask;
+ int fmt;
+};
+
struct q6afe_port_config {
struct q6afe_hdmi_cfg hdmi;
struct q6afe_slim_cfg slim;
+ struct q6afe_i2s_cfg i2s_cfg;
};
struct q6afe_port;
@@ -45,5 +57,6 @@ void q6afe_hdmi_port_prepare(struct q6afe_port *port,
struct q6afe_hdmi_cfg *cfg);
void q6afe_slim_port_prepare(struct q6afe_port *port,
struct q6afe_slim_cfg *cfg);
+int q6afe_i2s_port_prepare(struct q6afe_port *port, struct q6afe_i2s_cfg *cfg);
#endif /* __Q6AFE_H__ */
--
2.17.0
Powered by blists - more mailing lists