[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <f1917418-43a3-22b2-7ba4-2a946611bcbc@linux.intel.com>
Date: Mon, 21 May 2018 14:24:56 -0700
From: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Jean Delvare <jdelvare@...e.com>,
Jason M Biils <jason.m.bills@...ux.intel.com>,
linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
Alan Cox <alan@...ux.intel.com>,
Andrew Jeffery <andrew@...id.au>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Arnd Bergmann <arnd@...db.de>, Joel Stanley <joel@....id.au>,
Miguel Ojeda <miguel.ojeda.sandonis@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Stef van Os <stef.van.os@...drive-technologies.com>
Subject: Re: [v4 09/11] drivers/hwmon: Add PECI cputemp driver
On 5/21/2018 2:04 PM, Guenter Roeck wrote:
> On Mon, May 21, 2018 at 01:50:34PM -0700, Jae Hyun Yoo wrote:
>> On 5/21/2018 1:42 PM, Guenter Roeck wrote:
>>> On Mon, May 21, 2018 at 12:59:52PM -0700, Jae Hyun Yoo wrote:
>>>> This commit adds PECI cputemp hwmon driver.
>>>>
>>>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
>>>> Reviewed-by: Haiyue Wang <haiyue.wang@...ux.intel.com>
>>>> Reviewed-by: James Feist <james.feist@...ux.intel.com>
>>>> Reviewed-by: Vernon Mauery <vernon.mauery@...ux.intel.com>
>>>> Cc: Alan Cox <alan@...ux.intel.com>
>>>> Cc: Andrew Jeffery <andrew@...id.au>
>>>> Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
>>>> Cc: Arnd Bergmann <arnd@...db.de>
>>>> Cc: Jason M Biils <jason.m.bills@...ux.intel.com>
>>>> Cc: Joel Stanley <joel@....id.au>
>>>> Cc: Miguel Ojeda <miguel.ojeda.sandonis@...il.com>
>>>> Cc: Andrew Lunn <andrew@...n.ch>
>>>> Cc: Stef van Os <stef.van.os@...drive-technologies.com>
>>>> ---
>>>> drivers/hwmon/Kconfig | 14 ++
>>>> drivers/hwmon/Makefile | 1 +
>>>> drivers/hwmon/peci-cputemp.c | 407 +++++++++++++++++++++++++++++++++++
>>>> drivers/hwmon/peci-hwmon.c | 124 +++++++++++
>>>> drivers/hwmon/peci-hwmon.h | 51 +++++
>>>> 5 files changed, 597 insertions(+)
>>>> create mode 100644 drivers/hwmon/peci-cputemp.c
>>>> create mode 100644 drivers/hwmon/peci-hwmon.c
>>>> create mode 100644 drivers/hwmon/peci-hwmon.h
>>>>
>>>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>>>> index f10840ad465c..8492586bb1e4 100644
>>>> --- a/drivers/hwmon/Kconfig
>>>> +++ b/drivers/hwmon/Kconfig
>>>> @@ -1256,6 +1256,20 @@ config SENSORS_NCT7904
>>>> This driver can also be built as a module. If so, the module
>>>> will be called nct7904.
>>>> +config SENSORS_PECI_CPUTEMP
>>>> + tristate "PECI CPU temperature monitoring support"
>>>> + depends on OF
>>>> + depends on PECI
>>>> + help
>>>> + If you say yes here you get support for the generic Intel PECI
>>>> + cputemp driver which provides Digital Thermal Sensor (DTS) thermal
>>>> + readings of the CPU package and CPU cores that are accessible using
>>>> + the PECI Client Command Suite via the processor PECI client.
>>>> + Check Documentation/hwmon/peci-cputemp for details.
>>>> +
>>>> + This driver can also be built as a module. If so, the module
>>>> + will be called peci-cputemp.
>>>> +
>>>> config SENSORS_NSA320
>>>> tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
>>>> depends on GPIOLIB && OF
>>>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>>>> index e7d52a36e6c4..d18b374a9000 100644
>>>> --- a/drivers/hwmon/Makefile
>>>> +++ b/drivers/hwmon/Makefile
>>>> @@ -136,6 +136,7 @@ obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
>>>> obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
>>>> obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o
>>>> obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
>>>> +obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o peci-hwmon.o
>>>> obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
>>>> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
>>>> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
>>>> diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
>>>> new file mode 100644
>>>> index 000000000000..49c5a862bb58
>>>> --- /dev/null
>>>> +++ b/drivers/hwmon/peci-cputemp.c
>>>> @@ -0,0 +1,407 @@
>>>> +// SPDX-License-Identifier: GPL-2.0
>>>> +// Copyright (c) 2018 Intel Corporation
>>>> +
>>>> +#include <linux/hwmon.h>
>>>> +#include <linux/jiffies.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/of_device.h>
>>>> +
>>>> +#include "peci-hwmon.h"
>>>> +
>>>> +#define DEFAULT_CHANNEL_NUMS 4
>>>> +#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX
>>>> +#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
>>>> +
>>>> +/* The RESOLVED_CORES register in PCU of a client CPU */
>>>> +#define REG_RESOLVED_CORES_BUS 1
>>>> +#define REG_RESOLVED_CORES_DEVICE 30
>>>> +#define REG_RESOLVED_CORES_FUNCTION 3
>>>> +#define REG_RESOLVED_CORES_OFFSET 0xB4
>>>> +
>>>> +struct temp_group {
>>>> + struct temp_data die;
>>>> + struct temp_data tcontrol;
>>>> + struct temp_data tthrottle;
>>>> + struct temp_data tjmax;
>>>> + struct temp_data core[CORETEMP_CHANNEL_NUMS];
>>>> +};
>>>> +
>>>> +struct peci_cputemp {
>>>> + struct peci_client *client;
>>>> + struct device *dev;
>>>> + char name[PECI_NAME_SIZE];
>>>> + struct temp_group temp;
>>>> + u8 addr;
>>>> + uint cpu_no;
>>>> + const struct cpu_gen_info *gen_info;
>>>> + u32 core_mask;
>>>> + u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
>>>> + uint config_idx;
>>>> + struct hwmon_channel_info temp_info;
>>>> + const struct hwmon_channel_info *info[2];
>>>> + struct hwmon_chip_info chip;
>>>> +};
>>>> +
>>>> +enum cputemp_channels {
>>>> + channel_die,
>>>> + channel_tcontrol,
>>>> + channel_tthrottle,
>>>> + channel_tjmax,
>>>> + channel_core,
>>>> +};
>>>> +
>>>> +static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
>>>> + /* Die temperature */
>>>> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
>>>> + HWMON_T_CRIT_HYST,
>>>> +
>>>> + /* Tcontrol temperature */
>>>> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
>>>> +
>>>> + /* Tthrottle temperature */
>>>> + HWMON_T_LABEL | HWMON_T_INPUT,
>>>> +
>>>> + /* Tjmax temperature */
>>>> + HWMON_T_LABEL | HWMON_T_INPUT,
>>>> +
>>>> + /* Core temperature - for all core channels */
>>>> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
>>>> + HWMON_T_CRIT_HYST,
>>>> +};
>>>> +
>>>> +static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
>>>> + "Die",
>>>> + "Tcontrol",
>>>> + "Tthrottle",
>>>> + "Tjmax",
>>>> + "Core 0", "Core 1", "Core 2", "Core 3",
>>>> + "Core 4", "Core 5", "Core 6", "Core 7",
>>>> + "Core 8", "Core 9", "Core 10", "Core 11",
>>>> + "Core 12", "Core 13", "Core 14", "Core 15",
>>>> + "Core 16", "Core 17", "Core 18", "Core 19",
>>>> + "Core 20", "Core 21", "Core 22", "Core 23",
>>>> +};
>>>> +
>>>> +static s32 ten_dot_six_to_millidegree(s32 val)
>>>> +{
>>>> + return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
>>>> +}
>>>> +
>>>> +static int get_temp_targets(struct peci_cputemp *priv)
>>>> +{
>>>> + s32 tthrottle_offset;
>>>> + s32 tcontrol_margin;
>>>> + u8 pkg_cfg[4];
>>>> + int rc;
>>>> +
>>>> + /**
>>>> + * Just use only the tcontrol marker to determine if target values need
>>>> + * update.
>>>> + */
>>>> + if (!peci_hwmon_need_update(&priv->temp.tcontrol))
>>>> + return 0;
>>>> +
>>>> + rc = peci_hwmon_rd_pkg_cfg_cmd(priv->client->adapter, priv->addr,
>>>> + MBX_INDEX_TEMP_TARGET, 0, pkg_cfg);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + priv->temp.tjmax.value = pkg_cfg[2] * 1000;
>>>> +
>>>> + tcontrol_margin = pkg_cfg[1];
>>>> + tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
>>>> + priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
>>>> +
>>>> + tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000;
>>>> + priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
>>>> +
>>>> + peci_hwmon_mark_updated(&priv->temp.tcontrol);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int get_die_temp(struct peci_cputemp *priv)
>>>> +{
>>>> + struct peci_get_temp_msg msg;
>>>> + int rc;
>>>> +
>>>> + if (!peci_hwmon_need_update(&priv->temp.die))
>>>> + return 0;
>>>> +
>>>> + msg.addr = priv->addr;
>>>> +
>>>> + rc = peci_command(priv->client->adapter, PECI_CMD_GET_TEMP, &msg);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + /* Note that the tjmax should be available before calling it */
>>>> + priv->temp.die.value = priv->temp.tjmax.value +
>>>> + (msg.temp_raw * 1000 / 64);
>>>> +
>>>> + peci_hwmon_mark_updated(&priv->temp.die);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int get_core_temp(struct peci_cputemp *priv, int core_index)
>>>> +{
>>>> + s32 core_dts_margin;
>>>> + u8 pkg_cfg[4];
>>>> + int rc;
>>>> +
>>>> + if (!peci_hwmon_need_update(&priv->temp.core[core_index]))
>>>> + return 0;
>>>> +
>>>> + rc = peci_hwmon_rd_pkg_cfg_cmd(priv->client->adapter, priv->addr,
>>>> + MBX_INDEX_PER_CORE_DTS_TEMP,
>>>> + core_index, pkg_cfg);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg);
>>>> +
>>>> + /**
>>>> + * Processors return a value of the core DTS reading in 10.6 format
>>>> + * (10 bits signed decimal, 6 bits fractional).
>>>> + * Error codes:
>>>> + * 0x8000: General sensor error
>>>> + * 0x8001: Reserved
>>>> + * 0x8002: Underflow on reading value
>>>> + * 0x8003-0x81ff: Reserved
>>>> + */
>>>> + if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
>>>> + return -EIO;
>>>> +
>>>> + core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
>>>> +
>>>> + /* Note that the tjmax should be available before calling it */
>>>> + priv->temp.core[core_index].value = priv->temp.tjmax.value +
>>>> + core_dts_margin;
>>>> +
>>>> + peci_hwmon_mark_updated(&priv->temp.core[core_index]);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int cputemp_read_string(struct device *dev,
>>>> + enum hwmon_sensor_types type,
>>>> + u32 attr, int channel, const char **str)
>>>> +{
>>>> + if (attr != hwmon_temp_label)
>>>> + return -EOPNOTSUPP;
>>>> +
>>>> + *str = cputemp_label[channel];
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int cputemp_read(struct device *dev,
>>>> + enum hwmon_sensor_types type,
>>>> + u32 attr, int channel, long *val)
>>>> +{
>>>> + struct peci_cputemp *priv = dev_get_drvdata(dev);
>>>> + int rc, core_index;
>>>> +
>>>> + if (channel >= CPUTEMP_CHANNEL_NUMS ||
>>>> + !(priv->temp_config[channel] & BIT(attr)))
>>>> + return -EOPNOTSUPP;
>>>> +
>>>> + rc = get_temp_targets(priv);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + switch (attr) {
>>>> + case hwmon_temp_input:
>>>> + switch (channel) {
>>>> + case channel_die:
>>>> + rc = get_die_temp(priv);
>>>> + if (rc)
>>>> + break;
>>>> +
>>>> + *val = priv->temp.die.value;
>>>> + break;
>>>> + case channel_tcontrol:
>>>> + *val = priv->temp.tcontrol.value;
>>>> + break;
>>>> + case channel_tthrottle:
>>>> + *val = priv->temp.tthrottle.value;
>>>> + break;
>>>> + case channel_tjmax:
>>>> + *val = priv->temp.tjmax.value;
>>>> + break;
>>>> + default:
>>>> + core_index = channel - DEFAULT_CHANNEL_NUMS;
>>>> + rc = get_core_temp(priv, core_index);
>>>> + if (rc)
>>>> + break;
>>>> +
>>>> + *val = priv->temp.core[core_index].value;
>>>> + break;
>>>> + }
>>>> + break;
>>>> + case hwmon_temp_max:
>>>> + *val = priv->temp.tcontrol.value;
>>>> + break;
>>>> + case hwmon_temp_crit:
>>>> + *val = priv->temp.tjmax.value;
>>>> + break;
>>>> + case hwmon_temp_crit_hyst:
>>>> + *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
>>>> + break;
>>>> + default:
>>>> + rc = -EOPNOTSUPP;
>>>> + break;
>>>> + }
>>>> +
>>>> + return rc;
>>>> +}
>>>> +
>>>> +static umode_t cputemp_is_visible(const void *data,
>>>> + enum hwmon_sensor_types type,
>>>> + u32 attr, int channel)
>>>> +{
>>>> + const struct peci_cputemp *priv = data;
>>>> +
>>>> + if (priv->temp_config[channel] & BIT(attr))
>>>> + if (channel < DEFAULT_CHANNEL_NUMS ||
>>>> + (channel >= DEFAULT_CHANNEL_NUMS &&
>>>> + (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))
>>>> + return 0444;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static const struct hwmon_ops cputemp_ops = {
>>>> + .is_visible = cputemp_is_visible,
>>>> + .read_string = cputemp_read_string,
>>>> + .read = cputemp_read,
>>>> +};
>>>> +
>>>> +static int check_resolved_cores(struct peci_cputemp *priv)
>>>> +{
>>>> + struct peci_rd_pci_cfg_local_msg msg;
>>>> + int rc;
>>>> +
>>>> + /* Get the RESOLVED_CORES register value */
>>>> + msg.addr = priv->addr;
>>>> + msg.bus = REG_RESOLVED_CORES_BUS;
>>>> + msg.device = REG_RESOLVED_CORES_DEVICE;
>>>> + msg.function = REG_RESOLVED_CORES_FUNCTION;
>>>> + msg.reg = REG_RESOLVED_CORES_OFFSET;
>>>> + msg.rx_len = 4;
>>>> +
>>>> + rc = peci_command(priv->client->adapter, PECI_CMD_RD_PCI_CFG_LOCAL,
>>>> + &msg);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config);
>>>> + if (!priv->core_mask)
>>>> + return -EAGAIN;
>>>> +
>>>> + dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int create_core_temp_info(struct peci_cputemp *priv)
>>>> +{
>>>> + int rc, i;
>>>> +
>>>> + rc = check_resolved_cores(priv);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + for (i = 0; i < priv->gen_info->core_max; i++)
>>>> + if (priv->core_mask & BIT(i))
>>>> + while (i + DEFAULT_CHANNEL_NUMS >= priv->config_idx)
>>>> + priv->temp_config[priv->config_idx++] =
>>>> + config_table[channel_core];
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int peci_cputemp_probe(struct peci_client *client)
>>>> +{
>>>> + struct device *dev = &client->dev;
>>>> + struct peci_cputemp *priv;
>>>> + struct device *hwmon_dev;
>>>> + int rc;
>>>> +
>>>> + if ((client->adapter->cmd_mask &
>>>> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
>>>> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
>>>> + return -ENODEV;
>>>> +
>>>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>>>> + if (!priv)
>>>> + return -ENOMEM;
>>>> +
>>>> + dev_set_drvdata(dev, priv);
>>>> + priv->client = client;
>>>> + priv->dev = dev;
>>>> + priv->addr = client->addr;
>>>> + priv->cpu_no = priv->addr - PECI_BASE_ADDR;
>>>> +
>>>> + snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d",
>>>> + priv->cpu_no);
>>>> +
>>>> + rc = peci_hwmon_get_cpu_gen_info(client->adapter, priv->addr,
>>>> + &priv->gen_info);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + priv->temp_config[priv->config_idx++] = config_table[channel_die];
>>>> + priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
>>>> + priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
>>>> + priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
>>>> +
>>>> + rc = create_core_temp_info(priv);
>>>> + if (rc)
>>>> + dev_dbg(dev, "Skipped creating core temp info\n");
>>>> +
>>>> + priv->chip.ops = &cputemp_ops;
>>>> + priv->chip.info = priv->info;
>>>> +
>>>> + priv->info[0] = &priv->temp_info;
>>>> +
>>>> + priv->temp_info.type = hwmon_temp;
>>>> + priv->temp_info.config = priv->temp_config;
>>>> +
>>>> + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
>>>> + priv->name,
>>>> + priv,
>>>> + &priv->chip,
>>>> + NULL);
>>>> +
>>>> + if (IS_ERR(hwmon_dev))
>>>> + return PTR_ERR(hwmon_dev);
>>>> +
>>>> + dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static const struct of_device_id peci_cputemp_of_table[] = {
>>>> + { .compatible = "intel,peci-cputemp" },
>>>> + { }
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, peci_cputemp_of_table);
>>>> +
>>>> +static const struct peci_device_id peci_cputemp_ids[] = {
>>>> + { "peci-cputemp", 0, },
>>>> + { }
>>>> +};
>>>> +MODULE_DEVICE_TABLE(peci, peci_cputemp_ids);
>>>> +
>>>> +static struct peci_driver peci_cputemp_driver = {
>>>> + .probe = peci_cputemp_probe,
>>>> + .id_table = peci_cputemp_ids,
>>>> + .driver = {
>>>> + .name = "peci-cputemp",
>>>> + .of_match_table = of_match_ptr(peci_cputemp_of_table),
>>>> + },
>>>> +};
>>>> +module_peci_driver(peci_cputemp_driver);
>>>> +
>>>> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>");
>>>> +MODULE_DESCRIPTION("PECI cputemp driver");
>>>> +MODULE_LICENSE("GPL v2");
>>>> diff --git a/drivers/hwmon/peci-hwmon.c b/drivers/hwmon/peci-hwmon.c
>>>> new file mode 100644
>>>> index 000000000000..e137e301eb97
>>>> --- /dev/null
>>>> +++ b/drivers/hwmon/peci-hwmon.c
>>>> @@ -0,0 +1,124 @@
>>>> +// SPDX-License-Identifier: GPL-2.0
>>>> +// Copyright (c) 2018 Intel Corporation
>>>> +
>>>> +#include <linux/bitfield.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/peci.h>
>>>> +
>>>> +#include "peci-hwmon.h"
>>>> +
>>>> +#if IS_ENABLED(CONFIG_X86)
>>>> +#include <asm/intel-family.h>
>>>> +#else
>>>> +#define INTEL_FAM6_HASWELL_X 0x3F
>>>> +#define INTEL_FAM6_BROADWELL_X 0x4F
>>>> +#define INTEL_FAM6_SKYLAKE_X 0x55
>>>> +#endif
>>>
>>> The entire code is very Intel specific. Why this #if instead of
>>> making the driver dependent on X86 ?
>>>
>>
>> This code will be running on ARM kernel at this moment with a purpose
>> of monitoring remote x86 CPUs through PECI connection, so it's limited
>> on x86 build environment.
>>
> Then add that comment into the code to explain why you can not include
> asm/intel-family.h, and declare the defines unconditionally here.
>
> The distinction is that the driver only _supports_ Intel CPUs but
> can _run_ in the kernel of other architectures. This should be explained.
>
> Thanks,
> Guenter
>
Got it. I'll add a comment to explain that. Thanks a lot again!
-Jae
>>>> +
>>>> +#define LOWER_NIBBLE_MASK GENMASK(3, 0)
>>>> +#define UPPER_NIBBLE_MASK GENMASK(7, 4)
>>>> +
>>>> +#define CPU_ID_MODEL_MASK GENMASK(7, 4)
>>>> +#define CPU_ID_FAMILY_MASK GENMASK(11, 8)
>>>> +#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16)
>>>> +#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
>>>> +
>>>> +enum cpu_gens {
>>>> + CPU_GEN_HSX = 0, /* Haswell Xeon */
>>>> + CPU_GEN_BRX, /* Broadwell Xeon */
>>>> + CPU_GEN_SKX, /* Skylake Xeon */
>>>> +};
>>>> +
>>>> +static const struct cpu_gen_info cpu_gen_info_table[] = {
>>>> + [CPU_GEN_HSX] = {
>>>> + .family = 6, /* Family code */
>>>> + .model = INTEL_FAM6_HASWELL_X,
>>>> + .core_max = CORE_MAX_ON_HSX,
>>>> + .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
>>>> + .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
>>>> + [CPU_GEN_BRX] = {
>>>> + .family = 6, /* Family code */
>>>> + .model = INTEL_FAM6_BROADWELL_X,
>>>> + .core_max = CORE_MAX_ON_BDX,
>>>> + .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
>>>> + .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
>>>> + [CPU_GEN_SKX] = {
>>>> + .family = 6, /* Family code */
>>>> + .model = INTEL_FAM6_SKYLAKE_X,
>>>> + .core_max = CORE_MAX_ON_SKX,
>>>> + .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
>>>> + .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
>>>> +};
>>>> +
>>>> +int peci_hwmon_get_cpu_gen_info(struct peci_adapter *adapter, u8 addr,
>>>> + const struct cpu_gen_info **gen_info)
>>>> +{
>>>> + u32 cpu_id;
>>>> + int i, rc;
>>>> +
>>>> + rc = peci_get_cpu_id(adapter, addr, &cpu_id);
>>>> + if (rc)
>>>> + return rc;
>>>> +
>>>> + for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
>>>> + if (FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id) +
>>>> + FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id) ==
>>>> + cpu_gen_info_table[i].family &&
>>>> + FIELD_GET(CPU_ID_MODEL_MASK, cpu_id) ==
>>>> + FIELD_GET(LOWER_NIBBLE_MASK,
>>>> + cpu_gen_info_table[i].model) &&
>>>> + FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id) ==
>>>> + FIELD_GET(UPPER_NIBBLE_MASK,
>>>> + cpu_gen_info_table[i].model)) {
>>>> + break;
>>>> + }
>>>> + }
>>>> +
>>>> + if (i >= ARRAY_SIZE(cpu_gen_info_table))
>>>> + return -ENODEV;
>>>> +
>>>> + *gen_info = &cpu_gen_info_table[i];
>>>> +
>>>> + return 0;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(peci_hwmon_get_cpu_gen_info);
>>>> +
>>>> +bool peci_hwmon_need_update(struct temp_data *temp)
>>>> +{
>>>> + if (temp->valid &&
>>>> + time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
>>>> + return false;
>>>> +
>>>> + return true;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(peci_hwmon_need_update);
>>>> +
>>>> +void peci_hwmon_mark_updated(struct temp_data *temp)
>>>> +{
>>>> + temp->valid = 1;
>>>> + temp->last_updated = jiffies;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(peci_hwmon_mark_updated);
>>>> +
>>>> +int peci_hwmon_rd_pkg_cfg_cmd(struct peci_adapter *adapter, u8 addr,
>>>> + u8 mbx_idx, u16 param, u8 *data)
>>>> +{
>>>> + struct peci_rd_pkg_cfg_msg msg;
>>>> + int rc;
>>>> +
>>>> + msg.addr = addr;
>>>> + msg.index = mbx_idx;
>>>> + msg.param = param;
>>>> + msg.rx_len = 4;
>>>> +
>>>> + rc = peci_command(adapter, PECI_CMD_RD_PKG_CFG, &msg);
>>>> + if (!rc)
>>>> + memcpy(data, msg.pkg_config, 4);
>>>> +
>>>> + return rc;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(peci_hwmon_rd_pkg_cfg_cmd);
>>>> +
>>>> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>");
>>>> +MODULE_DESCRIPTION("PECI hwmon module");
>>>> +MODULE_LICENSE("GPL v2");
>>>> diff --git a/drivers/hwmon/peci-hwmon.h b/drivers/hwmon/peci-hwmon.h
>>>> new file mode 100644
>>>> index 000000000000..0896c27f33d8
>>>> --- /dev/null
>>>> +++ b/drivers/hwmon/peci-hwmon.h
>>>> @@ -0,0 +1,51 @@
>>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>>> +/* Copyright (c) 2018 Intel Corporation */
>>>> +
>>>> +#ifndef __PECI_HWMON_H
>>>> +#define __PECI_HWMON_H
>>>> +
>>>> +#include <linux/peci.h>
>>>> +
>>>> +#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
>>>> +
>>>> +#define UPDATE_INTERVAL HZ
>>>> +
>>>> +struct temp_data {
>>>> + uint valid;
>>>> + s32 value;
>>>> + ulong last_updated;
>>>> +};
>>>> +
>>>> +struct cpu_gen_info {
>>>> + u16 family;
>>>> + u8 model;
>>>> + uint core_max;
>>>> + uint chan_rank_max;
>>>> + uint dimm_idx_max;
>>>> +};
>>>> +
>>>> +#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
>>>> +#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
>>>> +#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
>>>> +
>>>> +#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
>>>> +#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
>>>> +#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
>>>> +
>>>> +#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
>>>> +#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
>>>> +#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
>>>> +
>>>> +#define CORE_NUMS_MAX CORE_MAX_ON_SKX
>>>> +#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
>>>> +#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
>>>> +#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
>>>> +
>>>> +int peci_hwmon_get_cpu_gen_info(struct peci_adapter *adapter, u8 addr,
>>>> + const struct cpu_gen_info **gen_info);
>>>> +bool peci_hwmon_need_update(struct temp_data *temp);
>>>> +void peci_hwmon_mark_updated(struct temp_data *temp);
>>>> +int peci_hwmon_rd_pkg_cfg_cmd(struct peci_adapter *adapter, u8 addr,
>>>> + u8 mbx_idx, u16 param, u8 *data);
>>>> +
>>>> +#endif /* __PECI_HWMON_H */
>>>> --
>>>> 2.17.0
>>>>
Powered by blists - more mailing lists