lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <705D14B1C7978B40A723277C067CEDE2010A9B43CC@IN01WEMBXB.internal.synopsys.com>
Date:   Tue, 22 May 2018 06:42:39 +0000
From:   Prabu Thangamuthu <Prabu.T@...opsys.com>
To:     "ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>
CC:     Manjunath M Bettegowda <Manjunath.MB@...opsys.com>,
        "prabu.t@...opsys.com" <prabu.t@...opsys.com>
Subject: [PATCH 1/1] mmc: sdhci-pci-dwc-mshc: synopsys dwc mshc support

To enable Synopsys DWC MSHC controller on HPAS-DX platform connected using
PCIe interface. As Clock generation logic is implemented in MMCM module of
HAPS-DX platform, we have separate functions to control the MMCM to
generate required clocks with respect to speed mode. Also we have platform
specific set_power function to support different VDD of eMMC devices.

Signed-off-by: Prabu Thangamuthu <prabu.t@...opsys.com>
---
 MAINTAINERS                           |   7 ++
 drivers/mmc/host/Makefile             |   3 +-
 drivers/mmc/host/sdhci-pci-core.c     |   1 +
 drivers/mmc/host/sdhci-pci-dwc-mshc.c | 146
++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-pci-dwc-mshc.h |  37 +++++++++
 drivers/mmc/host/sdhci-pci.h          |   3 +
 6 files changed, 196 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mmc/host/sdhci-pci-dwc-mshc.c
 create mode 100644 drivers/mmc/host/sdhci-pci-dwc-mshc.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 9051a9c..f1749c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12643,6 +12643,13 @@ S:    Maintained
 F:    drivers/mmc/host/sdhci*
 F:    include/linux/mmc/sdhci*
 
+SYNOPSYS SDHCI COMPLIANT DWC MSHC DRIVER
+M:    Prabu Thangamuthu <prabu.t@...opsys.com>
+M:    Manjunath M B <manjumb@...opsys.com>
+L:    linux-mmc@...r.kernel.org
+S:    Maintained
+F:    drivers/mmc/host/sdhci-pci-dwc-mshc*
+
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
 M:    Ben Dooks <ben-linux@...ff.org>
 M:    Jaehoon Chung <jh80.chung@...sung.com>
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 6aead24..6c0d3fb 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -11,7 +11,8 @@ obj-$(CONFIG_MMC_MXC)        += mxcmmc.o
 obj-$(CONFIG_MMC_MXS)        += mxs-mmc.o
 obj-$(CONFIG_MMC_SDHCI)        += sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)    += sdhci-pci.o
-sdhci-pci-y            += sdhci-pci-core.o sdhci-pci-o2micro.o
sdhci-pci-arasan.o
+sdhci-pci-y            += sdhci-pci-core.o sdhci-pci-o2micro.o
sdhci-pci-arasan.o \
+                   sdhci-pci-dwc-mshc.o
 obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))    += sdhci-pci-data.o
 obj-$(CONFIG_MMC_SDHCI_ACPI)    += sdhci-acpi.o
 obj-$(CONFIG_MMC_SDHCI_PXAV3)    += sdhci-pxav3.o
diff --git a/drivers/mmc/host/sdhci-pci-core.c
b/drivers/mmc/host/sdhci-pci-core.c
index 77dd352..96b6963 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1511,6 +1511,7 @@ static int amd_probe(struct sdhci_pci_chip *chip)
     SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
     SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
     SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
+    SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC,  snps),
     SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
     /* Generic SD host controller */
     {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
diff --git a/drivers/mmc/host/sdhci-pci-dwc-mshc.c
b/drivers/mmc/host/sdhci-pci-dwc-mshc.c
new file mode 100644
index 0000000..bca3db4
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-dwc-mshc.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDHCI driver for Synopsys DWC_MSHC controller
+ *
+ * Copyright (C) 2018 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors:
+ *    Prabu Thangamuthu <prabu.t@...opsys.com>
+ *    Manjunath M B <manjumb@...opsys.com>
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include "sdhci.h"
+#include "sdhci-pci.h"
+#include "sdhci-pci-dwc-mshc.h"
+
+/* Default emmc vdd is set to 3.3V */
+static unsigned int emmc_vdd = SDHC_EMMC_VDD_330V;
+module_param(emmc_vdd, int, 0444);
+
+static void sdhci_snps_set_clock(struct sdhci_host *host, unsigned int
clock)
+{
+    u16 clk = 0;
+    u32 reg = 0;
+    u32 vendor_ptr = 0;
+
+    vendor_ptr = sdhci_readw(host, SDHCI_VENDOR_PTR_R);
+
+    /* Disable Software managed rx tuning */
+    reg = sdhci_readl(host, (SDHC_AT_CTRL_R + vendor_ptr));
+    reg &= ~SDHC_SW_TUNE_EN;
+    sdhci_writel(host, reg, (SDHC_AT_CTRL_R + vendor_ptr));
+
+    if (clock <= 52000000) {
+        sdhci_set_clock(host, clock);
+    } else {
+        /* Assert reset to MMCM */
+        reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr));
+        reg |= SDHC_CCLK_MMCM_RST;
+        sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr));
+
+        /* Configure MMCM*/
+        sdhci_writel(host, DIV_REG_100_MHZ, SDHC_MMCM_DIV_REG);
+        sdhci_writel(host, CLKFBOUT_100_MHZ,
+                SDHC_MMCM_CLKFBOUT);
+
+        /* De-assert reset to MMCM*/
+        reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr));
+        reg &= ~SDHC_CCLK_MMCM_RST;
+        sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr));
+
+        /* Enable clock */
+        clk = SDHCI_PROG_CLOCK_MODE | SDHCI_CLOCK_INT_EN |
+            SDHCI_CLOCK_CARD_EN;
+        sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+    }
+}
+
+static void sdhci_snps_set_power(struct sdhci_host *host, unsigned char
mode,
+             unsigned short vdd)
+{
+    u8 pwr = 0;
+    u16 ctrl;
+
+    if (mode != MMC_POWER_OFF) {
+        switch (1 << vdd) {
+        case MMC_VDD_165_195:
+            pwr = SDHCI_POWER_180;
+            break;
+        case MMC_VDD_29_30:
+        case MMC_VDD_30_31:
+            pwr = SDHCI_POWER_300;
+            break;
+        case MMC_VDD_32_33:
+        case MMC_VDD_33_34:
+            pwr = SDHCI_POWER_330;
+            break;
+        default:
+            WARN(1, "%s: Invalid vdd %#x\n",
+                 mmc_hostname(host->mmc), vdd);
+            break;
+        }
+    }
+
+    if (host->pwr == pwr)
+        return;
+
+    host->pwr = pwr;
+
+    if (pwr == 0) {
+        sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+    } else {
+        sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+
+        /*
+         * Enable it for eMMC phy cfg1 test with 1.8V mode
+         */
+        if (emmc_vdd == SDHC_EMMC_VDD_180V) {
+            pwr = SDHCI_POWER_180;
+            sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+            ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+            /*
+             * Enable 1.8V Signal Enable in the Host Control2
+             * register
+             */
+            ctrl |= SDHCI_CTRL_VDD_180;
+            sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+        }
+        pwr |= SDHCI_POWER_ON;
+
+        sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+    }
+}
+
+static int sdhci_snps_pci_probe_slot(struct sdhci_pci_slot *slot)
+{
+    struct sdhci_host *host = slot->host;
+
+    host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+    host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+
+    return 0;
+}
+
+/* Synopsys DWC MSHC Controller based on SDHCI-PCI */
+static const struct sdhci_ops sdhci_snps_ops = {
+    .set_clock    = sdhci_snps_set_clock,
+    .set_power    = sdhci_snps_set_power,
+    .enable_dma    = sdhci_pci_enable_dma,
+    .set_bus_width    = sdhci_set_bus_width,
+    .reset        = sdhci_reset,
+    .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+const struct sdhci_pci_fixes sdhci_snps = {
+    .probe_slot    = sdhci_snps_pci_probe_slot,
+    .ops        = &sdhci_snps_ops,
+};
+
+MODULE_PARM_DESC(emmc_vdd, "VDD to configure eMMC device supply voltage");
diff --git a/drivers/mmc/host/sdhci-pci-dwc-mshc.h
b/drivers/mmc/host/sdhci-pci-dwc-mshc.h
new file mode 100644
index 0000000..352bbfd
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-dwc-mshc.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SDHCI driver for Synopsys DWC_MSHC controller
+ *
+ * Copyright (C) 2018 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors:
+ *    Prabu Thangamuthu <prabu.t@...opsys.com>
+ *    Manjunath M B <manjumb@...opsys.com>
+ *
+ */
+
+#ifndef __SDHCI_PCI_DWC_MSHC_H__
+#define __SDHCI_PCI_DWC_MSHC_H__
+
+#define SDHCI_VENDOR_PTR_R               0xE8
+
+/* Module Parameters */
+#define SDHC_EMMC_VDD_330V               33
+#define SDHC_EMMC_VDD_180V               18
+
+/* Synopsys Vendor Specific Registers */
+#define SDHC_GPIO_OUT                          0x34
+#define SDHC_AT_CTRL_R                   0x40
+
+#define SDHC_SW_TUNE_EN                   0x00000010
+
+/* MMCM DRP */
+#define SDHC_MMCM_DIV_REG               0x1020
+#define DIV_REG_100_MHZ                   0x1145
+
+#define SDHC_MMCM_CLKFBOUT               0x1024
+#define CLKFBOUT_100_MHZ               0x0000
+
+#define SDHC_CCLK_MMCM_RST               0x00000001
+
+#endif
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index db9cb54..c91dcec 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -59,6 +59,7 @@
 #define PCI_VENDOR_ID_ARASAN        0x16e6
 #define PCI_DEVICE_ID_ARASAN_PHY_EMMC    0x0670
 
+#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xC202
 /*
  * PCI device class and mask
  */
@@ -183,4 +184,6 @@ static inline void *sdhci_pci_priv(struct
sdhci_pci_slot *slot)
 
 extern const struct sdhci_pci_fixes sdhci_arasan;
 
+extern const struct sdhci_pci_fixes sdhci_snps;
+
 #endif /* __SDHCI_PCI_H */
-- 
1.9.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ