[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180522101801.18947-3-antoine.tenart@bootlin.com>
Date: Tue, 22 May 2018 12:18:00 +0200
From: Antoine Tenart <antoine.tenart@...tlin.com>
To: davem@...emloft.net, linux@...linux.org.uk
Cc: Antoine Tenart <antoine.tenart@...tlin.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
thomas.petazzoni@...tlin.com, maxime.chevallier@...tlin.com,
gregory.clement@...tlin.com, miquel.raynal@...tlin.com,
nadavh@...vell.com, stefanc@...vell.com, ymarkman@...vell.com,
mw@...ihalf.com
Subject: [PATCH net-next v2 2/3] net: phy: sfp: make the i2c-bus dt property mandatory
This patch makes the i2c-bus property mandatory when using a device
tree. If the sfp i2c bus isn't described it's impossible to guess the
protocol to use for a given module, and the sfp module would then not
work in most cases.
Signed-off-by: Antoine Tenart <antoine.tenart@...tlin.com>
---
drivers/net/phy/sfp.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index a91d12209a81..c4c92db86dfa 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -976,6 +976,7 @@ static int sfp_probe(struct platform_device *pdev)
if (pdev->dev.of_node) {
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *id;
+ struct i2c_adapter *i2c;
struct device_node *np;
id = of_match_node(sfp_of_match, node);
@@ -985,19 +986,20 @@ static int sfp_probe(struct platform_device *pdev)
sff = sfp->type = id->data;
np = of_parse_phandle(node, "i2c-bus", 0);
- if (np) {
- struct i2c_adapter *i2c;
-
- i2c = of_find_i2c_adapter_by_node(np);
- of_node_put(np);
- if (!i2c)
- return -EPROBE_DEFER;
-
- err = sfp_i2c_configure(sfp, i2c);
- if (err < 0) {
- i2c_put_adapter(i2c);
- return err;
- }
+ if (!np) {
+ dev_err(sfp->dev, "missing 'i2c-bus' property\n");
+ return -ENODEV;
+ }
+
+ i2c = of_find_i2c_adapter_by_node(np);
+ of_node_put(np);
+ if (!i2c)
+ return -EPROBE_DEFER;
+
+ err = sfp_i2c_configure(sfp, i2c);
+ if (err < 0) {
+ i2c_put_adapter(i2c);
+ return err;
}
}
--
2.17.0
Powered by blists - more mailing lists