[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1526990833-30707-10-git-send-email-claudiu.beznea@microchip.com>
Date: Tue, 22 May 2018 15:07:13 +0300
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
To: <thierry.reding@...il.com>, <shc_work@...l.ru>,
<robh+dt@...nel.org>, <mark.rutland@....com>, <corbet@....net>,
<nicolas.ferre@...rochip.com>,
<alexandre.belloni@...e-electrons.com>
CC: <linux-pwm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH v5 9/9] pwm: atmel: add push-pull mode support
Add support for PWM push-pull mode. This is only supported by SAMA5D2 SoCs.
Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
drivers/pwm/pwm-atmel.c | 40 ++++++++++++++++++++++++++++++++++++----
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 87ef54bd492c..aaafc4dd30f2 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -33,8 +33,11 @@
#define PWM_CMR 0x0
/* Bit field in CMR */
-#define PWM_CMR_CPOL (1 << 9)
-#define PWM_CMR_UPD_CDTY (1 << 10)
+#define PWM_CMR_CPOL BIT(9)
+#define PWM_CMR_UPD_CDTY BIT(10)
+#define PWM_CMR_DTHI BIT(17)
+#define PWM_CMR_DTLI BIT(18)
+#define PWM_CMR_PPM BIT(19)
#define PWM_CMR_CPRE_MSK 0xF
/* The following registers for PWM v1 */
@@ -219,16 +222,19 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
struct pwm_state cstate;
+ struct pwm_caps caps;
unsigned long cprd, cdty;
u32 pres, val;
int ret;
pwm_get_state(pwm, &cstate);
+ pwm_get_caps(chip, pwm, &caps);
if (state->enabled) {
if (cstate.enabled &&
cstate.polarity == state->polarity &&
- cstate.period == state->period) {
+ cstate.period == state->period &&
+ cstate.mode == state->mode) {
cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
atmel_pwm->data->regs.period);
atmel_pwm_calculate_cdty(state, cprd, &cdty);
@@ -263,6 +269,18 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
val &= ~PWM_CMR_CPOL;
else
val |= PWM_CMR_CPOL;
+
+ /* PWM mode. */
+ if (caps.modes & PWMC_MODE(PUSH_PULL)) {
+ if (state->mode == PWMC_MODE(PUSH_PULL)) {
+ val |= PWM_CMR_PPM | PWM_CMR_DTLI;
+ val &= ~PWM_CMR_DTHI;
+ } else {
+ val &= ~(PWM_CMR_PPM | PWM_CMR_DTLI |
+ PWM_CMR_DTHI);
+ }
+ }
+
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
mutex_lock(&atmel_pwm->isr_lock);
@@ -315,6 +333,20 @@ static const struct atmel_pwm_data atmel_pwm_data_v2 = {
},
};
+static const struct atmel_pwm_data atmel_pwm_data_v3 = {
+ .regs = {
+ .period = PWMV2_CPRD,
+ .period_upd = PWMV2_CPRDUPD,
+ .duty = PWMV2_CDTY,
+ .duty_upd = PWMV2_CDTYUPD,
+ },
+ .caps = {
+ .modes = PWMC_MODE(NORMAL) |
+ PWMC_MODE(COMPLEMENTARY) |
+ PWMC_MODE(PUSH_PULL),
+ },
+};
+
static const struct platform_device_id atmel_pwm_devtypes[] = {
{
.name = "at91sam9rl-pwm",
@@ -337,7 +369,7 @@ static const struct of_device_id atmel_pwm_dt_ids[] = {
.data = &atmel_pwm_data_v2,
}, {
.compatible = "atmel,sama5d2-pwm",
- .data = &atmel_pwm_data_v2,
+ .data = &atmel_pwm_data_v3,
}, {
/* sentinel */
},
--
2.7.4
Powered by blists - more mailing lists