linux-kernel - Re: [PATCH v2 2/5] gpio: syscon: Add gpio-syscon for rockchip

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180522180238.GA7328@rob-hp-laptop>
Date:   Tue, 22 May 2018 13:02:38 -0500
From:   Rob Herring <robh@...nel.org>
To:     djw@...hip.com.cn
Cc:     linux-rockchip@...ts.infradead.org, Wayne Chou <zxf@...hip.com.cn>,
        Heiko Stuebner <heiko@...ech.de>, devicetree@...r.kernel.org,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 2/5] gpio: syscon: Add gpio-syscon for rockchip

On Fri, May 18, 2018 at 11:52:05AM +0800, djw@...hip.com.cn wrote:
> From: Levin Du <djw@...hip.com.cn>
> 
> Some GPIOs sit in the GRF_SOC_CON registers of Rockchip SoCs,
> which do not belong to the general pinctrl.
> 
> Adding gpio-syscon support makes controlling regulator or
> LED using these special pins very easy by reusing existing
> drivers, such as gpio-regulator and led-gpio.
> 
> Signed-off-by: Levin Du <djw@...hip.com.cn>
> 
> ---
> 
> Changes in v2:
> - Rename gpio_syscon10 to gpio_mute in doc
> 
> Changes in v1:
> - Refactured for general gpio-syscon usage for Rockchip SoCs.
> - Add doc rockchip,gpio-syscon.txt
> 
>  .../bindings/gpio/rockchip,gpio-syscon.txt         | 41 ++++++++++++++++++++++
>  drivers/gpio/gpio-syscon.c                         | 30 ++++++++++++++++
>  2 files changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
> new file mode 100644
> index 0000000..b1b2a67
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-syscon.txt
> @@ -0,0 +1,41 @@
> +* Rockchip GPIO support for GRF_SOC_CON registers
> +
> +Required properties:
> +- compatible: Should contain "rockchip,gpio-syscon".
> +- gpio-controller: Marks the device node as a gpio controller.
> +- #gpio-cells: Should be two. The first cell is the pin number and
> +  the second cell is used to specify the gpio polarity:
> +    0 = Active high,
> +    1 = Active low.

There's no need for this child node. Just make the parent node a gpio 
controller.

Rob