linux-kernel - Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180523043006.2zlqfhyk5fe7uikz@vireshk-i7>
Date:   Wed, 23 May 2018 10:00:06 +0530
From:   Viresh Kumar <viresh.kumar@...aro.org>
To:     Sébastien Szymanski 
        <sebastien.szymanski@...adeus.com>
Cc:     linux-arm-kernel@...ts.infradead.org,
        "Rafael J . Wysocki" <rjw@...ysocki.net>, linux-pm@...r.kernel.org,
        linux-kernel@...r.kernel.org, Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        Stefan Agner <stefan@...er.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>, devicetree@...r.kernel.org
Subject: Re: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL

On 22-05-18, 08:28, Sébastien Szymanski wrote:
> Check the max speed supported from the fuses for i.MX6ULL and update the
> operating points table accordingly.
> 
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@...adeus.com>
> ---
> 
> Changes for v3:
>  - none
> 
> Changes for v2:
>  - none
> 
>  drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------
>  1 file changed, 23 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index 83cf631fc9bc..f094687cae52 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
>  }
>  
>  #define OCOTP_CFG3_6UL_SPEED_696MHZ	0x2
> +#define OCOTP_CFG3_6ULL_SPEED_792MHZ	0x2
> +#define OCOTP_CFG3_6ULL_SPEED_900MHZ	0x3
>  
>  static void imx6ul_opp_check_speed_grading(struct device *dev)
>  {
> @@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev)
>  	 * Speed GRADING[1:0] defines the max speed of ARM:
>  	 * 2b'00: Reserved;
>  	 * 2b'01: 528000000Hz;
> -	 * 2b'10: 696000000Hz;
> -	 * 2b'11: Reserved;
> +	 * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL;
> +	 * 2b'11: 900000000Hz on i.MX6ULL only;
>  	 * We need to set the max speed of ARM according to fuse map.
>  	 */
>  	val = readl_relaxed(base + OCOTP_CFG3);
>  	val >>= OCOTP_CFG3_SPEED_SHIFT;
>  	val &= 0x3;
> -	if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
> -		if (dev_pm_opp_disable(dev, 696000000))
> -			dev_warn(dev, "failed to disable 696MHz OPP\n");
> +
> +	if (of_machine_is_compatible("fsl,imx6ul")) {
> +		if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
> +			if (dev_pm_opp_disable(dev, 696000000))
> +				dev_warn(dev, "failed to disable 696MHz OPP\n");
> +	}
> +
> +	if (of_machine_is_compatible("fsl,imx6ull")) {
> +		if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ)
> +			if (dev_pm_opp_disable(dev, 792000000))
> +				dev_warn(dev, "failed to disable 792MHz OPP\n");
> +
> +		if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ)
> +			if (dev_pm_opp_disable(dev, 900000000))
> +				dev_warn(dev, "failed to disable 900MHz OPP\n");
> +	}
> +
>  	iounmap(base);
>  put_node:
>  	of_node_put(np);
> @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
>  		goto put_reg;
>  	}
>  
> -	if (of_machine_is_compatible("fsl,imx6ul"))
> +	if (of_machine_is_compatible("fsl,imx6ul") ||
> +	    of_machine_is_compatible("fsl,imx6ull"))
>  		imx6ul_opp_check_speed_grading(cpu_dev);
>  	else
>  		imx6q_opp_check_speed_grading(cpu_dev);

Acked-by: Viresh Kumar <viresh.kumar@...aro.org>

-- 
viresh