lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1527107527-8093-4-git-send-email-ray.jui@broadcom.com>
Date:   Wed, 23 May 2018 13:32:04 -0700
From:   Ray Jui <ray.jui@...adcom.com>
To:     Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Guenter Roeck <linux@...ck-us.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Frank Rowand <frowand.list@...il.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Robin Murphy <robin.murphy@....com>
Cc:     linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        Ray Jui <ray.jui@...adcom.com>
Subject: [PATCH v2 3/6] watchdog: sp805: add 'timeout-sec' DT property support

Add support for optional devicetree property 'timeout-sec'.
'timeout-sec' is used in the driver if specified in devicetree.
Otherwise, fall back to driver default, i.e., 60 seconds

Signed-off-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
---
 drivers/watchdog/sp805_wdt.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 03805bc..1484609 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -230,7 +230,14 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
 	spin_lock_init(&wdt->lock);
 	watchdog_set_nowayout(&wdt->wdd, nowayout);
 	watchdog_set_drvdata(&wdt->wdd, wdt);
-	wdt_setload(&wdt->wdd, DEFAULT_TIMEOUT);
+
+	/*
+	 * If 'timeout-sec' devicetree property is specified, use that.
+	 * Otherwise, use DEFAULT_TIMEOUT
+	 */
+	wdt->wdd.timeout = DEFAULT_TIMEOUT;
+	watchdog_init_timeout(&wdt->wdd, 0, &adev->dev);
+	wdt_setload(&wdt->wdd, wdt->wdd.timeout);
 
 	ret = watchdog_register_device(&wdt->wdd);
 	if (ret) {
-- 
2.1.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ