lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1527056424-14528-5-git-send-email-michal.vokac@ysoft.com>
Date:   Wed, 23 May 2018 08:20:21 +0200
From:   "Michal Vokáč" <vokac.m@...il.com>
To:     netdev@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        f.fainelli@...il.com, vivien.didelot@...oirfairelinux.com,
        andrew@...n.ch, mark.rutland@....com, robh+dt@...nel.org,
        davem@...emloft.net, michal.vokac@...ft.com
Subject: [PATCH net-next v3 4/7] net: dsa: qca8k: Force CPU port to its highest bandwidth

By default autonegotiation is enabled to configure MAC on all ports.
For the CPU port autonegotiation can not be used so we need to set
some sensible defaults manually.

This patch forces the default setting of the CPU port to 1000Mbps/full
duplex which is the chip maximum capability.

Also correct size of the bit field used to configure link speed.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
Changes in v3:
 - none

Changes in v2:
 - Add "Fixes" tag as pointed out by Florian.
 - Add "Reviewed-by" tags from Andrew and Florian.

 drivers/net/dsa/qca8k.c | 6 +++++-
 drivers/net/dsa/qca8k.h | 6 ++++--
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 0d224f3..14a108b38 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -537,6 +537,7 @@ qca8k_setup(struct dsa_switch *ds)
 {
 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 	int ret, i, phy_mode = -1;
+	u32 mask;
 
 	pr_debug("qca: setup\n");
 
@@ -564,7 +565,10 @@ qca8k_setup(struct dsa_switch *ds)
 	if (ret < 0)
 		return ret;
 
-	/* Enable CPU Port */
+	/* Enable CPU Port, force it to maximum bandwidth and full-duplex */
+	mask = QCA8K_PORT_STATUS_SPEED_1000 | QCA8K_PORT_STATUS_TXFLOW |
+	       QCA8K_PORT_STATUS_RXFLOW | QCA8K_PORT_STATUS_DUPLEX;
+	qca8k_write(priv, QCA8K_REG_PORT_STATUS(QCA8K_CPU_PORT), mask);
 	qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
 		      QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
 	qca8k_port_set_status(priv, QCA8K_CPU_PORT, 1);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 1cf8a92..5bda165 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -51,8 +51,10 @@
 #define QCA8K_GOL_MAC_ADDR0				0x60
 #define QCA8K_GOL_MAC_ADDR1				0x64
 #define QCA8K_REG_PORT_STATUS(_i)			(0x07c + (_i) * 4)
-#define   QCA8K_PORT_STATUS_SPEED			GENMASK(2, 0)
-#define   QCA8K_PORT_STATUS_SPEED_S			0
+#define   QCA8K_PORT_STATUS_SPEED			GENMASK(1, 0)
+#define   QCA8K_PORT_STATUS_SPEED_10			0
+#define   QCA8K_PORT_STATUS_SPEED_100			0x1
+#define   QCA8K_PORT_STATUS_SPEED_1000			0x2
 #define   QCA8K_PORT_STATUS_TXMAC			BIT(2)
 #define   QCA8K_PORT_STATUS_RXMAC			BIT(3)
 #define   QCA8K_PORT_STATUS_TXFLOW			BIT(4)
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ