| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f762464c796fa1976c1ec6fde6869add@agner.ch>
Date: Wed, 23 May 2018 10:22:24 +0200
From: Stefan Agner <stefan@...er.ch>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
devicetree@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Lucas Stach <dev@...xeye.de>
Subject: Re: [PATCH v5 1/3] ARM: dts: tegra: Remove skeleton.dtsi and fix DTC
warnings for /memory
On 23.05.2018 09:05, Krzysztof Kozlowski wrote:
> On Thu, May 17, 2018 at 1:39 PM, Stefan Agner <stefan@...er.ch> wrote:
>> On 17.05.2018 09:45, Krzysztof Kozlowski wrote:
>>> Remove the usage of skeleton.dtsi and add necessary properties to /memory
>>> node to fix the DTC warnings:
>>>
>>> arch/arm/boot/dts/tegra20-harmony.dtb: Warning (unit_address_vs_reg):
>>> /memory: node has a reg or ranges property, but no unit name
>>>
>>> The DTB after the change is the same as before except adding
>>> unit-address to /memory node.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
>>>
>>> ---
>>>
>>> Changes since v4:
>>> 1. None
>>> ---
>>> arch/arm/boot/dts/tegra114-dalmore.dts | 3 ++-
>>> arch/arm/boot/dts/tegra114-roth.dts | 3 ++-
>>> arch/arm/boot/dts/tegra114-tn7.dts | 3 ++-
>>> arch/arm/boot/dts/tegra114.dtsi | 4 ++--
>>> arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 3 ++-
>>> arch/arm/boot/dts/tegra124-apalis.dtsi | 3 ++-
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 3 ++-
>>> arch/arm/boot/dts/tegra124-nyan.dtsi | 3 ++-
>>> arch/arm/boot/dts/tegra124-venice2.dts | 3 ++-
>>> arch/arm/boot/dts/tegra124.dtsi | 2 --
>>> arch/arm/boot/dts/tegra20-colibri-512.dtsi | 3 ++-
>>> arch/arm/boot/dts/tegra20-harmony.dts | 3 ++-
>>> arch/arm/boot/dts/tegra20-paz00.dts | 3 ++-
>>> arch/arm/boot/dts/tegra20-seaboard.dts | 3 ++-
>>> arch/arm/boot/dts/tegra20-tamonten.dtsi | 3 ++-
>>> arch/arm/boot/dts/tegra20-trimslice.dts | 3 ++-
>>> arch/arm/boot/dts/tegra20-ventana.dts | 3 ++-
>>> arch/arm/boot/dts/tegra20.dtsi | 7 +++++--
>>> arch/arm/boot/dts/tegra30-apalis.dtsi | 5 +++++
>>> arch/arm/boot/dts/tegra30-beaver.dts | 3 ++-
>>> arch/arm/boot/dts/tegra30-cardhu.dtsi | 3 ++-
>>> arch/arm/boot/dts/tegra30-colibri.dtsi | 3 ++-
>>> arch/arm/boot/dts/tegra30.dtsi | 7 +++++--
>>> 23 files changed, 53 insertions(+), 26 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts
>>> b/arch/arm/boot/dts/tegra114-dalmore.dts
>>> index eafff16765b4..5cdcedfc19cb 100644
>>> --- a/arch/arm/boot/dts/tegra114-dalmore.dts
>>> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts
>>> @@ -23,7 +23,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@...00000 {
>>> + device_type = "memory";
>>> reg = <0x80000000 0x40000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra114-roth.dts
>>> b/arch/arm/boot/dts/tegra114-roth.dts
>>> index 7ed7370ee67a..b4f329a07c60 100644
>>> --- a/arch/arm/boot/dts/tegra114-roth.dts
>>> +++ b/arch/arm/boot/dts/tegra114-roth.dts
>>> @@ -28,7 +28,8 @@
>>> };
>>> };
>>>
>>> - memory {
>>> + memory@...00000 {
>>> + device_type = "memory";
>>> /* memory >= 0x79600000 is reserved for firmware usage */
>>> reg = <0x80000000 0x79600000>;
>>> };
>>> diff --git a/arch/arm/boot/dts/tegra114-tn7.dts
>>> b/arch/arm/boot/dts/tegra114-tn7.dts
>>> index 7fc4a8b31e45..12092d344ce8 100644
>>> --- a/arch/arm/boot/dts/tegra114-tn7.dts
>>> +++ b/arch/arm/boot/dts/tegra114-tn7.dts
>>> @@ -28,7 +28,8 @@
>>> };
>>> };
>>>
>>> - memory {
>>> + memory@...00000 {
>>> + device_type = "memory";
>>> /* memory >= 0x37e00000 is reserved for firmware usage */
>>> reg = <0x80000000 0x37e00000>;
>>> };
>>> diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
>>> index 0e4a13295d8a..b917784d3f97 100644
>>> --- a/arch/arm/boot/dts/tegra114.dtsi
>>> +++ b/arch/arm/boot/dts/tegra114.dtsi
>>> @@ -5,11 +5,11 @@
>>> #include <dt-bindings/pinctrl/pinctrl-tegra.h>
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>
>>> -#include "skeleton.dtsi"
>>> -
>>> / {
>>> compatible = "nvidia,tegra114";
>>> interrupt-parent = <&lic>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>>
>>> host1x@...00000 {
>>> compatible = "nvidia,tegra114-host1x", "simple-bus";
>>> diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
>>> b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
>>> index bb67edb016c5..80b52c612891 100644
>>> --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
>>> @@ -15,7 +15,8 @@
>>> compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
>>> "nvidia,tegra124";
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x0 0x80000000 0x0 0x80000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi
>>> b/arch/arm/boot/dts/tegra124-apalis.dtsi
>>> index 65a2161b9b8e..3ca7601cafe9 100644
>>> --- a/arch/arm/boot/dts/tegra124-apalis.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
>>> @@ -50,7 +50,8 @@
>>> model = "Toradex Apalis TK1";
>>> compatible = "toradex,apalis-tk1", "nvidia,tegra124";
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x0 0x80000000 0x0 0x80000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
>>> b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
>>> index 6dbcf84dafbc..8d9e6ee6c6a7 100644
>>> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
>>> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
>>> @@ -24,7 +24,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x0 0x80000000 0x0 0x80000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> index 3609367037a6..15a2b0e3237e 100644
>>> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
>>> @@ -13,7 +13,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x0 0x80000000 0x0 0x80000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124-venice2.dts
>>> b/arch/arm/boot/dts/tegra124-venice2.dts
>>> index 89bcc178994d..241cdc4b6600 100644
>>> --- a/arch/arm/boot/dts/tegra124-venice2.dts
>>> +++ b/arch/arm/boot/dts/tegra124-venice2.dts
>>> @@ -18,7 +18,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x0 0x80000000 0x0 0x80000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
>>> index 174092bfac90..df1642876a4c 100644
>>> --- a/arch/arm/boot/dts/tegra124.dtsi
>>> +++ b/arch/arm/boot/dts/tegra124.dtsi
>>> @@ -7,8 +7,6 @@
>>> #include <dt-bindings/reset/tegra124-car.h>
>>> #include <dt-bindings/thermal/tegra124-soctherm.h>
>>>
>>> -#include "skeleton.dtsi"
>>> -
>>> / {
>>> compatible = "nvidia,tegra124";
>>> interrupt-parent = <&lic>;
>>> diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
>>> b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
>>> index 5c202b3e3bb1..305efb275b48 100644
>>> --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
>>> +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
>>> @@ -10,7 +10,8 @@
>>> rtc1 = "/rtc@...0e000";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x00000000 0x20000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20-harmony.dts
>>> b/arch/arm/boot/dts/tegra20-harmony.dts
>>> index 628a55a9318b..5009a55ae15c 100644
>>> --- a/arch/arm/boot/dts/tegra20-harmony.dts
>>> +++ b/arch/arm/boot/dts/tegra20-harmony.dts
>>> @@ -18,7 +18,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x00000000 0x40000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20-paz00.dts
>>> b/arch/arm/boot/dts/tegra20-paz00.dts
>>> index 30436969adc0..e794ac5442ef 100644
>>> --- a/arch/arm/boot/dts/tegra20-paz00.dts
>>> +++ b/arch/arm/boot/dts/tegra20-paz00.dts
>>> @@ -19,7 +19,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x00000000 0x20000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts
>>> b/arch/arm/boot/dts/tegra20-seaboard.dts
>>> index 284aae351ff2..6cb832cfa4f3 100644
>>> --- a/arch/arm/boot/dts/tegra20-seaboard.dts
>>> +++ b/arch/arm/boot/dts/tegra20-seaboard.dts
>>> @@ -18,7 +18,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x00000000 0x40000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi
>>> b/arch/arm/boot/dts/tegra20-tamonten.dtsi
>>> index 872046d48709..6ceb1228fed3 100644
>>> --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
>>> +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
>>> @@ -15,7 +15,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x00000000 0x20000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts
>>> b/arch/arm/boot/dts/tegra20-trimslice.dts
>>> index d55c6b240a30..3f94be3da9e5 100644
>>> --- a/arch/arm/boot/dts/tegra20-trimslice.dts
>>> +++ b/arch/arm/boot/dts/tegra20-trimslice.dts
>>> @@ -18,7 +18,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x00000000 0x40000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20-ventana.dts
>>> b/arch/arm/boot/dts/tegra20-ventana.dts
>>> index ee3fbf941e79..c897a90289bc 100644
>>> --- a/arch/arm/boot/dts/tegra20-ventana.dts
>>> +++ b/arch/arm/boot/dts/tegra20-ventana.dts
>>> @@ -18,7 +18,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@0 {
>>> + device_type = "memory";
>>> reg = <0x00000000 0x40000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
>>> index 0a7136462a1a..290ebbeb210f 100644
>>> --- a/arch/arm/boot/dts/tegra20.dtsi
>>> +++ b/arch/arm/boot/dts/tegra20.dtsi
>>> @@ -4,11 +4,14 @@
>>> #include <dt-bindings/pinctrl/pinctrl-tegra.h>
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>
>>> -#include "skeleton.dtsi"
>>> -
>>> / {
>>> compatible = "nvidia,tegra20";
>>> interrupt-parent = <&lic>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + chosen { };
>>> + aliases { };
>>>
>>> iram@...00000 {
>>> compatible = "mmio-sram";
>>> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi
>>> b/arch/arm/boot/dts/tegra30-apalis.dtsi
>>> index d1d21ec2a844..184f60c720fa 100644
>>> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
>>> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
>>> @@ -10,6 +10,11 @@
>>> model = "Toradex Apalis T30";
>>> compatible = "toradex,apalis_t30", "nvidia,tegra30";
>>>
>>> + memory@0 {
>>> + device_type = "memory";
>>> + reg = <0 0>;
>>> + };
>>> +
>>> pcie@...0 {
>>> avdd-pexa-supply = <&vdd2_reg>;
>>> vdd-pexa-supply = <&vdd2_reg>;
>>> diff --git a/arch/arm/boot/dts/tegra30-beaver.dts
>>> b/arch/arm/boot/dts/tegra30-beaver.dts
>>> index ae52a5039506..72369877d284 100644
>>> --- a/arch/arm/boot/dts/tegra30-beaver.dts
>>> +++ b/arch/arm/boot/dts/tegra30-beaver.dts
>>> @@ -17,7 +17,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@...00000 {
>>> + device_type = "memory";
>>> reg = <0x80000000 0x7ff00000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi
>>> b/arch/arm/boot/dts/tegra30-cardhu.dtsi
>>> index 92a9740c533f..24c04d4c335d 100644
>>> --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
>>> +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
>>> @@ -40,7 +40,8 @@
>>> stdout-path = "serial0:115200n8";
>>> };
>>>
>>> - memory {
>>> + memory@...00000 {
>>> + device_type = "memory";
>>> reg = <0x80000000 0x40000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi
>>> b/arch/arm/boot/dts/tegra30-colibri.dtsi
>>> index c44d8c40c410..cc46cedf80b9 100644
>>> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
>>> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
>>> @@ -10,7 +10,8 @@
>>> model = "Toradex Colibri T30";
>>> compatible = "toradex,colibri_t30", "nvidia,tegra30";
>>>
>>> - memory {
>>> + memory@...00000 {
>>> + device_type = "memory";
>>> reg = <0x80000000 0x40000000>;
>>> };
>>>
>>> diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
>>> index a110cf84d85f..4383f0fd789d 100644
>>> --- a/arch/arm/boot/dts/tegra30.dtsi
>>> +++ b/arch/arm/boot/dts/tegra30.dtsi
>>> @@ -5,11 +5,14 @@
>>> #include <dt-bindings/pinctrl/pinctrl-tegra.h>
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>
>>> -#include "skeleton.dtsi"
>>> -
>>> / {
>>> compatible = "nvidia,tegra30";
>>> interrupt-parent = <&lic>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + chosen { };
>>> + aliases { };
>>
>> Could we not add
>>
>> memory { device_type = "memory"; };
>>
>> in the SoC level device trees?
>>
>> This would save device_type in all other instances.
>>
>> That is also how it is done in other places, e.g.
>> arch/arm/boot/dts/imx6qdl.dtsi
>
> Not really because the unit address will not match between different
> boards. The imx6qdl, as I see, has the same issue:
> - imx6qdl.dtsi defines "memory" node
> - imx6dl-apf6dev.dts includes the previous and defines "memory@...00000"
>
> This is wrong - two memory nodes.
>
Hm I see. We could add
memory@0 { device_type = "memory"; };
Since the reg property is specified in the board level device tree it
would be still fine?
Or probably better to provide a complete spec with length zero:
memory@0 {
device_type = "memory";
reg = <0x0 0x0>;
};
Even some boards do that and assume that boot loader will fill it
correctly, so that should be fine.
--
Stefan
>> Also, could we maybe split this in two?
>>
>> ARM: dts: tegra: Remove skeleton.dtsi
>> ARM: dts: tegra: fix DTC warnings for /memory
>
> It is possible to split it but this really won't bring any benefit
> because the removal of skeleton.dtsi is the way to fix the errors. Or
> saying it differently - the warnings are the reason to remove the
> skeleton.dtsi. If you split them, what is the reason to remove the
> skeleton.dtsi? (Theoretically it was deprecated so this could be
> explanation).
>
> If you wish, I can prepare something like:
> 1. Remove skeleton.dtsi and add everywhere 'device_type = "memory"'.
> All the warnings will stay but the end DTB should be equal between
> changes.
> 2. Fix warnings.
>
>> The first would only touch SoC level dts.
>
> No, because device_type has to be added everywhere. And because of
> warnings (explained before) it cannot be added to SoC DTSI.
>
> Best regards,
> Krzysztof
>
>>
>> The second then would fix DTC warnings by adding the address to the
>> memory nodes in all board files.
>>
>> --
>> Stefan
>>
>>>
>>> pcie@...0 {
>>> compatible = "nvidia,tegra30-pcie";
Powered by blists - more mailing lists