linux-kernel - [next, PATCH 2/6] usb: mtu3: fix uncontinuous SeqN issue after disable EP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <bd37d1585905360069baf2f3009b715258be56ac.1527065109.git.chunfeng.yun@mediatek.com>
Date:   Wed, 23 May 2018 16:53:16 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Felipe Balbi <felipe.balbi@...ux.intel.com>
CC:     Matthias Brugger <matthias.bgg@...il.com>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        <linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>
Subject: [next, PATCH 2/6] usb: mtu3: fix uncontinuous SeqN issue after disable EP

Reset EP when disable it to reset data toggle for U2 EP, and
SeqN, flow control status etc for U3 EP, this can avoid
issue of uncontinuous SeqN

Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
 drivers/usb/mtu3/mtu3_core.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 65ff53a..279f9cd 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -195,6 +195,16 @@ static void mtu3_intr_enable(struct mtu3 *mtu)
 	mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR);
 }
 
+/* reset: u2 - data toggle, u3 - SeqN, flow control status etc */
+static void mtu3_ep_reset(struct mtu3_ep *mep)
+{
+	struct mtu3 *mtu = mep->mtu;
+	u32 rst_bit = EP_RST(mep->is_in, mep->epnum);
+
+	mtu3_setbits(mtu->mac_base, U3D_EP_RST, rst_bit);
+	mtu3_clrbits(mtu->mac_base, U3D_EP_RST, rst_bit);
+}
+
 /* set/clear the stall and toggle bits for non-ep0 */
 void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
 {
@@ -220,8 +230,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
 	}
 
 	if (!set) {
-		mtu3_setbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum));
-		mtu3_clrbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum));
+		mtu3_ep_reset(mep);
 		mep->flags &= ~MTU3_EP_STALL;
 	} else {
 		mep->flags |= MTU3_EP_STALL;
@@ -400,6 +409,7 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep)
 		mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum));
 	}
 
+	mtu3_ep_reset(mep);
 	ep_fifo_free(mep);
 
 	dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name);
-- 
1.9.1