linux-kernel - [PATCH v3 5/6] arm64: dt: set initial SR watchdog timeout to 60 seconds

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1527120924-12131-6-git-send-email-ray.jui@broadcom.com>
Date:   Wed, 23 May 2018 17:15:23 -0700
From:   Ray Jui <ray.jui@...adcom.com>
To:     Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Guenter Roeck <linux@...ck-us.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Frank Rowand <frowand.list@...il.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Robin Murphy <robin.murphy@....com>
Cc:     linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        Ray Jui <ray.jui@...adcom.com>
Subject: [PATCH v3 5/6] arm64: dt: set initial SR watchdog timeout to 60 seconds

Set initial Stingray watchdog timeout to 60 seconds

By the time when the userspace watchdog daemon is ready and taking
control over, the watchdog timeout will then be reset to what's
configured in the daemon

Signed-off-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
---
 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 99aaff0..1e1cf49 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -420,6 +420,7 @@
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
 			clock-names = "wdogclk", "apb_pclk";
+			timeout-sec = <60>;
 		};
 
 		gpio_hsls: gpio@...00 {
-- 
2.1.4