| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b8b393f7-c23c-0b20-289c-8fd07bd759dc@linux.intel.com>
Date: Thu, 24 May 2018 10:09:25 -0700
From: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
To: Rob Herring <robh@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>,
Haiyue Wang <haiyue.wang@...ux.intel.com>,
Vernon Mauery <vernon.mauery@...ux.intel.com>,
James Feist <james.feist@...ux.intel.com>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Andrew Jeffery <andrew@...id.au>,
Arnd Bergmann <arnd@...db.de>,
Jason M Biils <jason.m.bills@...ux.intel.com>,
Joel Stanley <joel@....id.au>
Subject: Re: [v4 07/11] dt-bindings: hwmon: Add documents for PECI hwmon
client drivers
On 5/24/2018 6:47 AM, Rob Herring wrote:
> On Wed, May 23, 2018 at 4:56 PM, Jae Hyun Yoo
> <jae.hyun.yoo@...ux.intel.com> wrote:
>> On 5/23/2018 1:03 PM, Jae Hyun Yoo wrote:
>>>
>>> On 5/23/2018 12:33 PM, Rob Herring wrote:
>>>>
>>>> On Wed, May 23, 2018 at 11:37 AM, Jae Hyun Yoo
>>>> <jae.hyun.yoo@...ux.intel.com> wrote:
>>>>>
>>>>> On 5/23/2018 8:11 AM, Rob Herring wrote:
>>>>>>
>>>>>>
>>>>>> On Tue, May 22, 2018 at 12:18 PM, Jae Hyun Yoo
>>>>>> <jae.hyun.yoo@...ux.intel.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>> On 5/22/2018 9:42 AM, Rob Herring wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, May 21, 2018 at 12:59:05PM -0700, Jae Hyun Yoo wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> This commit adds dt-bindings documents for PECI hwmon client
>>>>>>>>> drivers.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
>>>>>>>>> Reviewed-by: Haiyue Wang <haiyue.wang@...ux.intel.com>
>>>>>>>>> Reviewed-by: James Feist <james.feist@...ux.intel.com>
>>>>>>>>> Reviewed-by: Vernon Mauery <vernon.mauery@...ux.intel.com>
>>>>>>>>> Cc: Andrew Jeffery <andrew@...id.au>
>>>>>>>>> Cc: Arnd Bergmann <arnd@...db.de>
>>>>>>>>> Cc: Jason M Biils <jason.m.bills@...ux.intel.com>
>>>>>>>>> Cc: Joel Stanley <joel@....id.au>
>>>>>>>>> ---
>>>>>>>>> .../bindings/hwmon/peci-cputemp.txt | 23
>>>>>>>>> ++++++++++++++++++
>>>>>>>>> .../bindings/hwmon/peci-dimmtemp.txt | 24
>>>>>>>>> +++++++++++++++++++
>>>>>>>>> 2 files changed, 47 insertions(+)
>>>>>>>>> create mode 100644
>>>>>>>>> Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
>>>>>>>>> create mode 100644
>>>>>>>>> Documentation/devicetree/bindings/hwmon/peci-dimmtemp.txt
>>>>>>>>>
>>>>>>>>> diff --git
>>>>>>>>> a/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
>>>>>>>>> b/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
>>>>>>>>> new file mode 100644
>>>>>>>>> index 000000000000..2f59aee12d9e
>>>>>>>>> --- /dev/null
>>>>>>>>> +++ b/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
>>>>>>>>> @@ -0,0 +1,23 @@
>>>>>>>>> +Bindings for Intel PECI (Platform Environment Control Interface)
>>>>>>>>> cputemp
>>>>>>>>> driver.
>>>>>>>>> +
>>>>>>>>> +Required properties:
>>>>>>>>> +- compatible : Should be "intel,peci-cputemp".
>>>>>>>>> +- reg : Should contain address of a client CPU. Address
>>>>>>>>> range
>>>>>>>>> of
>>>>>>>>> CPU
>>>>>>>>> + clients is starting from 0x30 based on PECI
>>>>>>>>> specification.
>>>>>>>>> +
>>>>>>>>> +Example:
>>>>>>>>> + peci-bus@0 {
>>>>>>>>> + #address-cells = <1>;
>>>>>>>>> + #size-cells = <0>;
>>>>>>>>> + < more properties >
>>>>>>>>> +
>>>>>>>>> + peci-cputemp@30 {
>>>>>>>>> + compatible = "intel,peci-cputemp";
>>>>>>>>> + reg = <0x30>;
>>>>>>>>> + };
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> [...]
>>>>>>>>
>>>>>>>>> + peci-dimmtemp@30 {
>>>>>>>>> + compatible = "intel,peci-dimmtemp";
>>>>>>>>> + reg = <0x30>;
>>>>>>>>> + };
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> As I said in the prior version, 2 nodes at the same address is wrong.
>>>>>>>>
>>>>>>>> Rob
>>>>>>>>
>>>>>>>
>>>>>>> In PECI bus, there is one and only bus host (adapter) and multiple
>>>>>>> clients on a PECI bus, and PECI spec doesn't allow multiple
>>>>>>> originators
>>>>>>> so only the host device can originate message.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Yes, I get that. A single host still has to address slave devices.
>>>>>>
>>>>>>> In this implementation,
>>>>>>> all message transactions on a bus from client driver modules and user
>>>>>>> space will be serialized well in the PECI core bus driver so bus
>>>>>>> occupation and traffic arbitration will be managed well in the PECI
>>>>>>> core
>>>>>>> bus driver even in case of a bus has 2 client drivers at the same
>>>>>>> address. I'm sure that this implementation doesn't make that kind of
>>>>>>> problem to OS.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Multiple clients to a single device is common, but that is a software
>>>>>> problem and doesn't belong in DT.
>>>>>>
>>>>>> I don't think there is a single other case in the kernel where
>>>>>> multiple drivers can bind to the same device at a given bus address.
>>>>>> That is why we have things like MFD. Though in this case, why can't
>>>>>> one hwmon driver register multiple hwmon devices (cpu and dimm temps)?
>>>>>>
>>>>>
>>>>> It was implemented as a single driver until v2 but dimm temps need
>>>>> delayed creation unlikely the cpu temps on hwmon subsystem because of
>>>>> memory training behavior of remote x86 cpus. Since hwmon doesn't allow
>>>>> incremental creation, I had to divide it into two, cputemp and dimmtemp,
>>>>> so that cputemp can be registered immediately when the remote x86 cpu
>>>>> turns on and dimmtemp can be registered by delayed creation. It is the
>>>>> reason why I had to make the two hwmon driver modules that sharing a
>>>>> single device address.
>>>>
>>>>
>>>> That all sounds like kernel problems to me. Stop designing your DT
>>>> binding around what the kernel can or can't *currently* support.
>>>>
>>>>> Additionally, PECI isn't limited for temperature
>>>>> monitoring feature but it can be used for other functions such as
>>>>> platform management, cpu interface tuning and diagnostics and failure
>>>>> analysis, so in case of adding a new driver for the functions, we should
>>>>> add an another DT node which is sharing the same cpu address.
>>>>
>>>>
>>>> No, the driver should add support for those additional functions.
>>>> Perhaps you will need to use MFD.
>>>>
>>>
>>> Do you mean that the device address sharing is acceptable if I make
>>> these nodes under "simple-mfd"?
>>>
>>> Thanks,
>>>
>>> -Jae
>>
>>
>> Hi Rob,
>>
>> I'm planning to change the whole PECI node like below:
>>
>> peci: peci@...8b000 {
>> compatible = "simple-bus";
>> #address-cells = <1>;
>> #size-cells = <1>;
>> ranges = <0x0 0x1e78b000 0x60>;
>>
>> peci0: peci-bus@0 {
>> compatible = "aspeed,ast2500-peci";
>> reg = <0x0 0x60>;
>> #address-cells = <1>;
>> #size-cells = <0>;
>> interrupts = <15>;
>> clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
>> resets = <&syscon ASPEED_RESET_PECI>;
>> clock-frequency = <24000000>;
>> msg-timing = <1>;
>> addr-timing = <1>;
>> rd-sampling-point = <8>;
>> cmd-timeout-ms = <1000>;
>> status = "disabled";
>>
>> peci-client@30 {
>> compatible = "simple-mfd", "syscon";
>
> These compatibles alone is not correct. There should be a specific
> compatible for the device.
>
> Also, I don't think "syscon" even makes sense in this case.
>
Got it. I'll change it like:
compatible = "intel,peci-client", "simple-mfd";
so that drivers could be instantiated altogether if the drivers use the
"intel,peci-client" compatible string.
>> reg = <0x30>;
>>
>> cputemp: cputemp {
>> compatible = "intel,peci-cputemp";
>> };
>
> There is no point in this node being in DT. It doesn't define any
> resources. All it does is provide you a convenient way to bind your
> driver, but that is not the purpose of DT. Put a specific compatible
> in the parent and its driver can instantiate whatever child devices it
> wants.
>
My intention is making each driver can be selectively instantiated by
this node and it could use its parent reg resource which is in
simple-mfd node. If the selective instantiation is not needed, drivers
could use "intel,peci-client". Please correct me if it is still
unacceptable.
Thanks,
-Jae
Powered by blists - more mailing lists