lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 24 May 2018 22:45:30 +0200
From:   Lukas Wunner <lukas@...ner.de>
To:     Thomas Gleixner <tglx@...utronix.de>
Cc:     Bjorn Helgaas <bhelgaas@...gle.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        "Sebastian Andrzej Siewior" <bigeasy@...utronix.de>,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: [PATCH] genirq: Synchronize only with single thread on free_irq()

When pciehp is converted to threaded IRQ handling, removal of unplugged
devices below a PCIe hotplug port happens synchronously in the IRQ
thread.  Removal of devices typically entails a call to free_irq() by
their drivers.

If those devices share their IRQ with the hotplug port, free_irq()
deadlocks because it calls synchronize_irq() to wait for all hard IRQ
handlers as well as all threads sharing the IRQ to finish.

Actually it's sufficient to wait only for the IRQ thread of the removed
device, so call synchronize_hardirq() to wait for all hard IRQ handlers
to finish, but no longer for any threads.  Compensate by rearranging the
control flow in irq_wait_for_interrupt() such that the device's thread
is allowed to run one last time after kthread_stop() has been called.

Stack trace for posterity:
    INFO: task irq/17-pciehp:94 blocked for more than 120 seconds.
    schedule+0x28/0x80
    synchronize_irq+0x6e/0xa0
    __free_irq+0x15a/0x2b0
    free_irq+0x33/0x70
    pciehp_release_ctrl+0x98/0xb0
    pcie_port_remove_service+0x2f/0x40
    device_release_driver_internal+0x157/0x220
    bus_remove_device+0xe2/0x150
    device_del+0x124/0x340
    device_unregister+0x16/0x60
    remove_iter+0x1a/0x20
    device_for_each_child+0x4b/0x90
    pcie_port_device_remove+0x1e/0x30
    pci_device_remove+0x36/0xb0
    device_release_driver_internal+0x157/0x220
    pci_stop_bus_device+0x7d/0xa0
    pci_stop_bus_device+0x3d/0xa0
    pci_stop_and_remove_bus_device+0xe/0x20
    pciehp_unconfigure_device+0xb8/0x160
    pciehp_disable_slot+0x84/0x130
    pciehp_ist+0x158/0x190
    irq_thread_fn+0x1b/0x50
    irq_thread+0x143/0x1a0
    kthread+0x111/0x130

Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
Cc: Thomas Gleixner <tglx@...utronix.de>
Signed-off-by: Lukas Wunner <lukas@...ner.de>
---
 kernel/irq/manage.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index e3336d904f64..603d2672f942 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -756,9 +756,19 @@ static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
 
 static int irq_wait_for_interrupt(struct irqaction *action)
 {
-	set_current_state(TASK_INTERRUPTIBLE);
+	for (;;) {
+		set_current_state(TASK_INTERRUPTIBLE);
 
-	while (!kthread_should_stop()) {
+		if (kthread_should_stop()) {
+			/* may need to run one last time. */
+			if (test_and_clear_bit(IRQTF_RUNTHREAD,
+					       &action->thread_flags)) {
+				__set_current_state(TASK_RUNNING);
+				return 0;
+			}
+			__set_current_state(TASK_RUNNING);
+			return -1;
+		}
 
 		if (test_and_clear_bit(IRQTF_RUNTHREAD,
 				       &action->thread_flags)) {
@@ -766,10 +776,7 @@ static int irq_wait_for_interrupt(struct irqaction *action)
 			return 0;
 		}
 		schedule();
-		set_current_state(TASK_INTERRUPTIBLE);
 	}
-	__set_current_state(TASK_RUNNING);
-	return -1;
 }
 
 /*
@@ -990,7 +997,7 @@ static int irq_thread(void *data)
 	/*
 	 * This is the regular exit path. __free_irq() is stopping the
 	 * thread via kthread_stop() after calling
-	 * synchronize_irq(). So neither IRQTF_RUNTHREAD nor the
+	 * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
 	 * oneshot mask bit can be set. We cannot verify that as we
 	 * cannot touch the oneshot mask at this point anymore as
 	 * __setup_irq() might have given out currents thread_mask
@@ -1595,7 +1602,7 @@ static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
 	unregister_handler_proc(irq, action);
 
 	/* Make sure it's not being used on another CPU: */
-	synchronize_irq(irq);
+	synchronize_hardirq(irq);
 
 #ifdef CONFIG_DEBUG_SHIRQ
 	/*
-- 
2.17.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ