[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180524213735.12121-1-bjorn.andersson@linaro.org>
Date: Thu, 24 May 2018 14:37:35 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Manu Gautam <mgautam@...eaurora.org>,
Vivek Gautam <vivek.gautam@...eaurora.org>
Cc: linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] clk: qcom: gcc-msm8996: Disable halt check on UFS clocks
The halt check of the UFS symbol clocks always fails, as such probing
UFS after clk_disable_unused always fails. This makes it impossible to
boot a system with the UFS phy or UFS HCD drivers compiled as modules.
Follow SDM845 and disable the halt check on these clocks.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
drivers/clk/qcom/gcc-msm8996.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index 3d6452932797..5f17080c5804 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -2792,6 +2792,7 @@ static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
.halt_reg = 0x7501c,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x7501c,
.enable_mask = BIT(0),
@@ -2807,6 +2808,7 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
.halt_reg = 0x75020,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x75020,
.enable_mask = BIT(0),
--
2.17.0
Powered by blists - more mailing lists