linux-kernel - [PATCH 4.16 113/161] scsi: lpfc: Fix nonrecovery of NVME controller after cable swap.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 24 May 2018 11:38:58 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Dick Kennedy <dick.kennedy@...adcom.com>,
        James Smart <james.smart@...adcom.com>,
        Hannes Reinecke <hare@...e.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Sasha Levin <alexander.levin@...rosoft.com>
Subject: [PATCH 4.16 113/161] scsi: lpfc: Fix nonrecovery of NVME controller after cable swap.

4.16-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@...il.com>

[ Upstream commit 815a9c437617e221842d12b3366ff6911b3df628 ]

In a test that is doing large numbers of cable swaps on the target, the
nvme controllers wouldn't reconnect.

During the cable swaps, the targets n_port_id would change. This
information was passed to the nvme-fc transport, in the new remoteport
registration. However, the nvme-fc transport didn't update the n_port_id
value in the remoteport struct when it reused an existing structure.
Later, when a new association was attempted on the remoteport, the
driver's NVME LS routine would use the stale n_port_id from the
remoteport struct to address the LS. As the device is no longer at that
address, the LS would go into never never land.

Separately, the nvme-fc transport will be corrected to update the
n_port_id value on a re-registration.

However, for now, there's no reason to use the transports values.  The
private pointer points to the drivers node structure and the node
structure is up to date. Therefore, revise the LS routine to use the
drivers data structures for the LS. Augmented the debug message for
better debugging in the future.

Also removed a duplicate if check that seems to have slipped in.

Signed-off-by: Dick Kennedy <dick.kennedy@...adcom.com>
Signed-off-by: James Smart <james.smart@...adcom.com>
Reviewed-by: Hannes Reinecke <hare@...e.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_nvme.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -241,10 +241,11 @@ lpfc_nvme_cmpl_gen_req(struct lpfc_hba *
 	ndlp = (struct lpfc_nodelist *)cmdwqe->context1;
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
 			 "6047 nvme cmpl Enter "
-			 "Data %p DID %x Xri: %x status %x cmd:%p lsreg:%p "
-			 "bmp:%p ndlp:%p\n",
+			 "Data %p DID %x Xri: %x status %x reason x%x cmd:%p "
+			 "lsreg:%p bmp:%p ndlp:%p\n",
 			 pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
 			 cmdwqe->sli4_xritag, status,
+			 (wcqe->parameter & 0xffff),
 			 cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp);
 
 	lpfc_nvmeio_data(phba, "NVME LS  CMPL: xri x%x stat x%x parm x%x\n",
@@ -419,6 +420,7 @@ lpfc_nvme_ls_req(struct nvme_fc_local_po
 {
 	int ret = 0;
 	struct lpfc_nvme_lport *lport;
+	struct lpfc_nvme_rport *rport;
 	struct lpfc_vport *vport;
 	struct lpfc_nodelist *ndlp;
 	struct ulp_bde64 *bpl;
@@ -437,19 +439,18 @@ lpfc_nvme_ls_req(struct nvme_fc_local_po
 	 */
 
 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+	rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
 	vport = lport->vport;
 
 	if (vport->load_flag & FC_UNLOADING)
 		return -ENODEV;
 
-	if (vport->load_flag & FC_UNLOADING)
-		return -ENODEV;
-
-	ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
+	/* Need the ndlp.  It is stored in the driver's rport. */
+	ndlp = rport->ndlp;
 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
-				 "6051 DID x%06x not an active rport.\n",
-				 pnvme_rport->port_id);
+				 "6051 Remoteport %p, rport has invalid ndlp. "
+				 "Failing LS Req\n", pnvme_rport);
 		return -ENODEV;
 	}
 
@@ -500,8 +501,9 @@ lpfc_nvme_ls_req(struct nvme_fc_local_po
 
 	/* Expand print to include key fields. */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
-			 "6149 ENTER.  lport %p, rport %p lsreq%p rqstlen:%d "
-			 "rsplen:%d %pad %pad\n",
+			 "6149 Issue LS Req to DID 0x%06x lport %p, rport %p "
+			 "lsreq%p rqstlen:%d rsplen:%d %pad %pad\n",
+			 ndlp->nlp_DID,
 			 pnvme_lport, pnvme_rport,
 			 pnvme_lsreq, pnvme_lsreq->rqstlen,
 			 pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
@@ -517,7 +519,7 @@ lpfc_nvme_ls_req(struct nvme_fc_local_po
 				ndlp, 2, 30, 0);
 	if (ret != WQE_SUCCESS) {
 		atomic_inc(&lport->xmt_ls_err);
-		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
 				 "6052 EXIT. issue ls wqe failed lport %p, "
 				 "rport %p lsreq%p Status %x DID %x\n",
 				 pnvme_lport, pnvme_rport, pnvme_lsreq,