[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180524093624.403719551@linuxfoundation.org>
Date: Thu, 24 May 2018 11:37:45 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, John Youn <johnyoun@...opsys.com>,
Vardan Mikayelyan <mvardan@...opsys.com>,
Grigor Tovmasyan <tovmasya@...opsys.com>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Sasha Levin <alexander.levin@...rosoft.com>
Subject: [PATCH 4.14 059/165] usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vardan Mikayelyan <mvardan@...opsys.com>
[ Upstream commit 755d739534f998d92e348fba8ffb0478416576e7 ]
We should call dwc2_hsotg_enqueue_setup() after properly
setting lx_state. Because it may cause error-out from
dwc2_hsotg_enqueue_setup() due to wrong value in lx_state.
Issue can be reproduced by loading driver while connected
A-Connector (start in A-HOST mode) then disconnect A-Connector
to switch to B-DEVICE.
Acked-by: John Youn <johnyoun@...opsys.com>
Signed-off-by: Vardan Mikayelyan <mvardan@...opsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@...opsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@...ux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/usb/dwc2/gadget.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3414,12 +3414,6 @@ void dwc2_hsotg_core_init_disconnected(s
dwc2_writel(dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0);
- dwc2_hsotg_enqueue_setup(hsotg);
-
- dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
- dwc2_readl(hsotg->regs + DIEPCTL0),
- dwc2_readl(hsotg->regs + DOEPCTL0));
-
/* clear global NAKs */
val = DCTL_CGOUTNAK | DCTL_CGNPINNAK;
if (!is_usb_reset)
@@ -3430,6 +3424,12 @@ void dwc2_hsotg_core_init_disconnected(s
mdelay(3);
hsotg->lx_state = DWC2_L0;
+
+ dwc2_hsotg_enqueue_setup(hsotg);
+
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ dwc2_readl(hsotg->regs + DIEPCTL0),
+ dwc2_readl(hsotg->regs + DOEPCTL0));
}
static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
Powered by blists - more mailing lists