| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180525044038.37756-4-yangbo.lu@nxp.com>
Date: Fri, 25 May 2018 12:40:37 +0800
From: Yangbo Lu <yangbo.lu@....com>
To: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Richard Cochran <richardcochran@...il.com>,
<claudiu.manoil@....com>, Rob Herring <robh+dt@...nel.org>
CC: Yangbo Lu <yangbo.lu@....com>
Subject: [PATCH 4/5] dt-bindings: ptp: add ptp-qoriq.txt
This patch is to add a documentation for ptp_qoriq dt-bindings.
The description for ptp_qoriq dt-bindings was actually moved
from Documentation/devicetree/bindings/net/fsl-tsec-phy.txt,
since gianfar_ptp driver was moved to ptp_qoriq driver.
Signed-off-by: Yangbo Lu <yangbo.lu@....com>
---
.../devicetree/bindings/net/fsl-tsec-phy.txt | 68 +-------------------
.../devicetree/bindings/ptp/ptp-qoriq.txt | 69 ++++++++++++++++++++
2 files changed, 70 insertions(+), 67 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 79bf352..047bdf7 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -86,70 +86,4 @@ Example:
* Gianfar PTP clock nodes
-General Properties:
-
- - compatible Should be "fsl,etsec-ptp"
- - reg Offset and length of the register set for the device
- - interrupts There should be at least two interrupts. Some devices
- have as many as four PTP related interrupts.
-
-Clock Properties:
-
- - fsl,cksel Timer reference clock source.
- - fsl,tclk-period Timer reference clock period in nanoseconds.
- - fsl,tmr-prsc Prescaler, divides the output clock.
- - fsl,tmr-add Frequency compensation value.
- - fsl,tmr-fiper1 Fixed interval period pulse generator.
- - fsl,tmr-fiper2 Fixed interval period pulse generator.
- - fsl,max-adj Maximum frequency adjustment in parts per billion.
-
- These properties set the operational parameters for the PTP
- clock. You must choose these carefully for the clock to work right.
- Here is how to figure good values:
-
- TimerOsc = selected reference clock MHz
- tclk_period = desired clock period nanoseconds
- NominalFreq = 1000 / tclk_period MHz
- FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
- tmr_add = ceil(2^32 / FreqDivRatio)
- OutputClock = NominalFreq / tmr_prsc MHz
- PulseWidth = 1 / OutputClock microseconds
- FiperFreq1 = desired frequency in Hz
- FiperDiv1 = 1000000 * OutputClock / FiperFreq1
- tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
- max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
-
- The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
- driver expects that tmr_fiper1 will be correctly set to produce a 1
- Pulse Per Second (PPS) signal, since this will be offered to the PPS
- subsystem to synchronize the Linux clock.
-
- Reference clock source is determined by the value, which is holded
- in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
- value, which will be directly written in those bits, that is why,
- according to reference manual, the next clock sources can be used:
-
- <0> - external high precision timer reference clock (TSEC_TMR_CLK
- input is used for this purpose);
- <1> - eTSEC system clock;
- <2> - eTSEC1 transmit clock;
- <3> - RTC clock input.
-
- When this attribute is not used, eTSEC system clock will serve as
- IEEE 1588 timer reference clock.
-
-Example:
-
- ptp_clock@...00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <12 0x8 13 0x8>;
- interrupt-parent = < &ipic >;
- fsl,cksel = <1>;
- fsl,tclk-period = <10>;
- fsl,tmr-prsc = <100>;
- fsl,tmr-add = <0x999999A4>;
- fsl,tmr-fiper1 = <0x3B9AC9F6>;
- fsl,tmr-fiper2 = <0x00018696>;
- fsl,max-adj = <659999998>;
- };
+Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
new file mode 100644
index 0000000..0f569d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
@@ -0,0 +1,69 @@
+* Freescale QorIQ 1588 timer based PTP clock
+
+General Properties:
+
+ - compatible Should be "fsl,etsec-ptp"
+ - reg Offset and length of the register set for the device
+ - interrupts There should be at least two interrupts. Some devices
+ have as many as four PTP related interrupts.
+
+Clock Properties:
+
+ - fsl,cksel Timer reference clock source.
+ - fsl,tclk-period Timer reference clock period in nanoseconds.
+ - fsl,tmr-prsc Prescaler, divides the output clock.
+ - fsl,tmr-add Frequency compensation value.
+ - fsl,tmr-fiper1 Fixed interval period pulse generator.
+ - fsl,tmr-fiper2 Fixed interval period pulse generator.
+ - fsl,max-adj Maximum frequency adjustment in parts per billion.
+
+ These properties set the operational parameters for the PTP
+ clock. You must choose these carefully for the clock to work right.
+ Here is how to figure good values:
+
+ TimerOsc = selected reference clock MHz
+ tclk_period = desired clock period nanoseconds
+ NominalFreq = 1000 / tclk_period MHz
+ FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
+ tmr_add = ceil(2^32 / FreqDivRatio)
+ OutputClock = NominalFreq / tmr_prsc MHz
+ PulseWidth = 1 / OutputClock microseconds
+ FiperFreq1 = desired frequency in Hz
+ FiperDiv1 = 1000000 * OutputClock / FiperFreq1
+ tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+ max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+ The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+ driver expects that tmr_fiper1 will be correctly set to produce a 1
+ Pulse Per Second (PPS) signal, since this will be offered to the PPS
+ subsystem to synchronize the Linux clock.
+
+ Reference clock source is determined by the value, which is holded
+ in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+ value, which will be directly written in those bits, that is why,
+ according to reference manual, the next clock sources can be used:
+
+ <0> - external high precision timer reference clock (TSEC_TMR_CLK
+ input is used for this purpose);
+ <1> - eTSEC system clock;
+ <2> - eTSEC1 transmit clock;
+ <3> - RTC clock input.
+
+ When this attribute is not used, eTSEC system clock will serve as
+ IEEE 1588 timer reference clock.
+
+Example:
+
+ ptp_clock@...00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0x24E00 0xB0>;
+ interrupts = <12 0x8 13 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,cksel = <1>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <100>;
+ fsl,tmr-add = <0x999999A4>;
+ fsl,tmr-fiper1 = <0x3B9AC9F6>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <659999998>;
+ };
--
1.7.1
Powered by blists - more mailing lists